Retour 7.2.2 sur XU4

loli72 · 12 Jul 2021, 13:26

@zing Quand à moi, l'écran OGST affiche bien les vidéos, donc il ne s'agit pas d'un problème signalé avant la 7.2.2. L'image s'affiche mais elle est saccadée.
En ce qui me concerne, je ne dis rien d'autre depuis le début de ce post.
D'autre part je ne vais pas ouvrir un compte gitlab pour cela, il me semblait que signaler un problème sur ce forum suffisait par le passé.

manitou · 12 Jul 2021, 17:03

@zing

idéalement vous devriez essayer pour vérifier ce que vous avez fait mal.

Je pense avoir déjà avoir assez vérifier en refaisant la manipulation au minimum six ou sept fois, sans compter le temps passé à vérifier ligne par ligne les 2 fichiers.

L'as-tu déjà testé avec une autre carte SD?

Non je n'ai pas encore testé sur une autre carte SD. Mais je doute que cela proviennent de la carte SD car la version installé fonctionne parfaitement... Et avec cette carte SD j'arrive à faire fonctionner l'ecran en version 6.0/6.1/6.1.1 et 7.1.1...

L'as-tu testé avec un autre câble?
Avec un autre téléviseur?

Idem je vois mal comment cela peut provenir d'un câble et encore moins de la télé ....

Et comment avez-vous fait, êtes-vous sûr de le faire correctement?

J'ai simplement modifié les lignes strictement nécessaire dans le fichier config.ini et recalbox.conf
Rien de plus et rien de moins

cedric-debuiselle · 12 Jul 2021, 17:22

je viens de crée une demande dans l'issue
j'ai refais une installe propre aucun résultat je suis avec une carte eMMC
y a t'il un moyen de pouvoir tester l'écran pour voir si ce n'est pas un problème matériel ?

davidb2111 · 12 Jul 2021, 19:24

Bonjour,

Voici la marche à suivre pour activer l'écran OGST:

il faut éditer le fichier recalbox.conf qui se trouve sur la partition SHARE dans le répertoire system.
Dans ce fichier, il faut modifier ces paramètres:

 system.secondminitft.enabled=1
system.secondminitft.type=overlay
system.secondminitft.resolution=240p

Prenez soin d'enlever les ; qui se trouveraient devant chaque ligne

si vous avez procédé à une installation fraîche de la version 7.2.2, vous pouvez passer directement à l'étape 3. Pour les personnes qui ont effectué une mise à jour, il faudra copier 2 fichiers avant de procéder à l'étape 3: dans la partition RECALBOX, copier le fichier boot.ini.sample en boot.ini. Prenez soin de vérifier la configuration écran (les lignes qui commencent par setenv). En général, il suffit de d'enlever le # qui se trouve devant la résolution que vous désirez. (Notez qu'il est possible de commenter toutes les options setenv videoconfig, le XU4 prendra tout seul la meilleure résolution).
Copier aussi le fichier config.ini.sample en config.ini.
éditer ensuite le fichier config.ini qui se trouve sur la partition RECALBOX.
Il suffit juste d'enlever le ; de la ligne

overlay_profile=hktft_cs_ogst

redémarrer le XU4.

Le wiki sera modifié pour prendre en compte ce nouveau fonctionnement.

David

manitou · 12 Jul 2021, 19:38

@cedric-debuiselle il semblerait selon certain retour que en eMMC cela ne fonctionne pas .... mais de mon coté en micro SD cela ne fonctionne pas non plus

cedric-debuiselle · 13 Jul 2021, 21:00

Merci pour les lignes je vais tester ça demain

je vais essayé sur une micro SD pour voir si y a du changement

davidb2111 · 13 Jul 2021, 22:32

@loli72

Salut,

En effet, les vidéos saccadent. J'ai isolé d'où cela vient. Ça sera corrigé dans la prochaine version.

Petit aparté, le xu4 n'est pas une plateforme laissée à l'abandon. Bien au contraire, nous essayons de la faire progresser au fil des releases de Recalbox. La complexité à maintenir en vie la plateforme vient du fait que le constructeur ne fait pas évoluer les softs qui sont utiles pour la plateforme (le noyau Linux pour ne citer que lui) et il faut attendre des initiatives de la communauté pour voir des avancées. Malheureusement, elles ne sont pas toutes parfaites et il faut parfois adapter des bouts de code.

David

cedric-debuiselle · 14 Jul 2021, 17:26

@loli72 said in Retour 7.2.2 sur XU4:

@manitou Au cas où je te laisse le contenu complet de mon recalbox.conf et du config.ini en 7.2.2. Après je vois plus quoi faire.

recalbox.conf

 # System Variable
# You can configure your recalbox from here
# To set a variable, remove the first ; on the line
# NOTE ON CEC FOR REMOTES
# you've to plug the ODROID XU4 on the HDMI1 of your tv
# this is a limitation of the EXYNOS libcec adapter
 
# ------------ A - System Options ----------- #
#    Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=WITTYPI             # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
;system.power.switch=PIN56ONOFF          # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH           # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET    # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
## Splash screen duration
##  0 : Video will be stopped when emulationstation is ready to start.
## -1 : All the video will be played before emulationstation start (default)
## >0 : Time the video will be played before emulationstation start (in seconds)
system.splash.length=-1
## Splash videos selection
## all: select a boot video in recalbox videos and user videos
## recalbox: select a boot video only in recalbox videos
## custom: select a boot video only in user videos
## Any invalid value means "all"
system.splash.select=all
## Recalbox Manager (http manager)
system.manager.enabled=1
## Currently, only version 2 is available
system.manager.version=2
## Recalbox security
# enforce security
# samba password required
# disable virtual gamepads
system.security.enabled=0
## Recalbox API (REST)
system.api.enabled=0
## EmulationStation
### menu style
### default -> default all options menu
### none -> no menu except the game search menu
### bartop -> less menu, only needed for bartops
emulationstation.menu=default
### Select a system to show on boot (use rom directory name) (string)
emulationstation.selectedsystem=favorites
### Show the gamelist of the first or selected system on boot (0,1)
emulationstation.bootongamelist=0
### Disable system view. ES will boot and show ONLY the first or selected system (0,1)
emulationstation.hidesystemview=0
### Pa&ast;&ast;e Gamelists only. Show only games listed in gamelist.xml files (0,1)
emulationstation.gamelistonly=0
### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
emulationstation.forcebasicgamelistview=0
### Filter out adult games
### you may use emulationstation.snes.filteradultgames=1
### to filter out adult games for the snes system or any other system
;emulationstation.filteradultgames=1
### Zipped gamelist preference
### Whatever you choose, emulationstation can read both compressed
### and uncompressed gamelist.xml or gamelist.zip
### However updated gamelist will be saved in your prefered format.
### Zipped format may save load time, especially on slow devices.
### 0 = gamelist.xml
### 1 = gamelist.zip
;emulationstation.zippedgamelist=1
## Arcade metasystem
## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo
## into a single "Arcade" system.
;emulationstation.arcade=1
## You may want to specify its position in the system list. (Default: 0)
## Negatives values may be used to tart from the end (-1 = last position)
;emulationstation.arcade.position=0
## Include NeoGeo or not (default: 1)
;emulationstation.arcade.includeneogeo=1
## Hide included system or leave them in the system list (default: 1)
;emulationstation.arcade.hideoriginals=1
## Virtual systems
### Activate a virtual system with all games available from all systems
;emulationstation.collection.allgames=1
### Activate a virtual system with all multiplayer games (players >= 2)
;emulationstation.collection.multiplayers=1
### Activate a virtual system with last played games
;emulationstation.collection.lastplayed=1
## Videosnaps
### Delay before videosnaps start, in millisecond. Default: 2s
;emulationstation.videosnaps.delay=2000
### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out
;emulationstation.videosnaps.loop=1
### Enable videosnap sound/music
;emulationstation.videosnaps.sound=1
## Scrapers
### Activate this option to extract region from filename when possible
;scraper.extractregionfromfilename=1
### Select the source of game's names
### 0 = from scrapper result (default)
### 1 = from filename
### 2 = from filename undecorated (i.e: (text) and [text] removed)
;scraper.getnamefrom=0 
### ScreenScraper.fr
### Force media region - if not defined, region is taken from system.language. Default: us
;scraper.screenscraper.region=eu
### Force text language - if not defined, region is taken from system.language. Default: en
;scraper.screenscraper.language=fr
### Choose the media to download among:
### screenshot: game screenshot
### title     : game title screenshot
### box2d     : Front case
### box3d     : 3D rendered case
### mixv1     : Recalbox special mix image V1 (default)
### mixv2     : Recalbox special mix image V2
;scraper.screenscraper.media=mixv1
### ScreenScraper account
;scraper.screenscraper.user=
;scraper.screenscraper.password=
## Emulator special keys
## default -> default all special keys
## nomenu -> cannot popup the emulator menu
## none -> no special keys in emulators
system.emulators.specialkeys=default
## Show or hide kodi in emulationstation (0,1)
kodi.enabled=0
## Start kodi at launch (0,1)
kodi.atstartup=0
## set x button shortcut (0,1)
kodi.xbutton=0
## Kodi can wait for a network component before starting
## waithost is the ip or hostname that must answer to a ping to validate the availability
## waittime is the maximum time waited when kodi boots
## if waitmode is required, kodi will not start if the component is not available
## if waitmode is wish, kodi will start if the component is not available
## if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50
 
 
# ------------ B - Network ------------ #
## Set system hostname
system.hostname=RECALBOX
## Activate wifi (0,1)
wifi.enabled=0
## Set wifi region
## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN)
wifi.region=JP
## Wifi SSID (string)
;wifi.ssid=new ssid
## Wifi KEY (string)
## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
## Escape your special chars (# ; $) with a backslash : $ => \$
;wifi.key=new key
## Wifi - static IP
## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask)
## if any value is missing or all lines are commented out, it will fall back to the
## default of DHCP
;wifi.ip=manual ip address
;wifi.gateway=new gateway
;wifi.netmask=new netmask
# secondary wifi (not configurable via the user interface)
;wifi2.ssid=new ssid
;wifi2.key=new key
# third wifi (not configurable via the user interface)
;wifi3.ssid=new ssid
;wifi3.key=new key
## Samba share
system.samba.enabled=1
### Virtual Gamepads
system.virtual-gamepads.enabled=1
### SSH
system.ssh.enabled=1
 
 
# ------------ C - Audio ------------ #
## Set the audio device (auto, hdmi, jack)
audio.device=alsa_card.0:hdmi-output-0
## Set system volume (0..100)
audio.volume=90
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=1
 
 
# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1
# Enable ERTM
controllers.bluetooth.ertm=1
 
## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose a driver between bluez, official and shanwan
## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
## official -> sixad drivers, support official and gasia sisaxis
## shanwan -> shanwan drivers, support official and shanwan sisaxis
controllers.ps3.driver=bluez
 
# ------------ D2 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2
 
## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1
## Gamecon controllers
## Enable gamecon controllers, for nes, snes, psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1
## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1
# ------------ D3 - Joycon Controllers ------------ #
controllers.joycond.enabled=1
 
# ------------ E - Language and keyboard ------------ #
## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=fr_FR
## set the keyboard layout (fr,en,de,us,es)
system.kblayout=fr
## Set you local time
## Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris
 
 
# ------------ F - UPDATES ------------ #
## Automatically check for updates at start (0,1)
updates.enabled=1
# Update type : default to stable
updates.type=stable
 
 
# ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
## The global value will be used for all emulators, except if the value
## is redefined in the emulator
## Set game resolution for emulators
## Please don't modify this setting
## This arch does not support the video mode switch
## (string)
global.videomode=default
## Shader set 
## Automatically select shaders for all systems
## (none, retro, scanlines)
global.shaderset=none
## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=0
## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=
## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto
## Set smooth for all emulators (0,1)
global.smooth=1
## Set rewind for all emulators (0,1)
global.rewind=1
## Set autosave/load savestate for all emulators (0,1)
global.autosave=0
## Enable retroarchievements (0,1)
## Set your www.retroachievements.org username/password
## Escape your special chars (# ; $) with a backslash : $ => \$
global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.username=
global.retroachievements.password=
## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=auto
## If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg
## Demo screensaver parameters
## Set the system list from which ES will run random games
## Empty list or unexisting key means all available systems
global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes
## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions
;global.demo.duration=90
## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens.
;global.demo.infoscreenduration=6
## Retroarch AI Translation service
## Comment out or set to 0 the following key if you don't want the AI service
global.translate=1
## Set the source and the target languages.
## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ,
##                        AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS,
##                        MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI
## Setting the translate.from key to a specified language may speed up or give more accurate results
## If translate.to key is commented, the default value is extracted from system.language or, if system.language is
## undefined, set to auto (=EN).
global.translate.from=auto
global.translate.to=auto
## zTranslate API Key
## go to https://ztranslate.net and create an account.
## validate your account, then log in and go to the settngs page
## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key:
;global.translate.apikey=RECALBOX
## Other translation service
## If you want to use another translation service or a custom API call, use this key to
## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key
;global.translate.url=
 
 
# ------------ H - EMULATORS CHOICES ----------- #
## You can override the global configurations here
## Here is the snes example
;snes.core=snes9x2010
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0
## If you do not want recalboxOS to generate the configuration for the emulator: 
;snes.configfile=/path/to/my/configfile.cfg
## Default cores for Odroid XU4
;snes.core=snes9x
n64.core=gliden64
## NeoGeo emulator 
## You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000)
neogeo.core=fbneo
## Demo screensaver parameters
## Include or exclude a particular system from the demo screensaver
## You may change the global.demo.systemlist key or include/exclude every single system
;snes.demo.include=0
## Set the session duration for a particular system
;snes.demo.duration=90
 
 
# ------------ J - TFT SECONDARY SCREEN ----------- #
#Second miniTFT screen as marquee to display scrapes and videos
#Enable it with system.secondMiniTFT.enabled=1, disable with system.secondMiniTFT.enabled=0
#this configuration is REQUIRED 
system.secondminitft.enabled=1
 
#Type of mini TFT : OGST, unknown
#Most of spi tft screen are enabled thanks to overlays in /boot/config.txt in rpi and /boot/config.ini on odroidxu4
#please check the specific configuration of your screen
#Some examples are available on the page .....
# values are :
# - overlay : screen configured through overlays in /boot/config.txt or /boot/config.ini (odroidxu4/ogst)
# - default : the rest of the world
#this configuration is REQUIRED if system.secondminitft.enabled=1
system.secondminitft.type=overlay
 
#Choose the resolution of your screen
#miniTFT resolution  320x240 -> 240p, 480x320 -> 320p
#this configuration is REQUIRED if system.secondminitft.enabled=1
system.secondminitft.resolution=240p
#Scraped image aspect on tft screen : fbv display option
# options available : stretch, ignore-aspect, enlarge.
# stretch : Strech (using a simple resizing routine) the image to fit onto screen if necessary
# alpha : use the alpha channel (if applicable)
# ignore-aspect : Ignore the image aspect while resizing
# enlarge : Enlarge the image to fit the whole screen if necessary
# 1 = enabled, 0 = disabled
#this configuration is REQUIRED if system.secondminitft.enabled=1
system.secondminitft.imagestretchenabled=1
system.secondminitft.imageenlargeenabled=0
system.secondminitft.imagealphaenabled=1
system.secondminitft.imageignoreaspectenabled=1
#When activating the second TFT screen, you may want to display
#game scraped video only on the second screen. This variable
#allows you to disable scraped video playing in ES during game browsing
#system.secondminitft.disablevideoines=1 disable video playing in ES
#system.secondminitft.disablevideoines=0 enable video playing in ES
#this configuration is OPTIONAL if system.secondminitft.enabled=1
system.secondminitft.disablevideoines=1
#if the backlight of your your screen can be manage by PWM, 
#indicates the  GPIO value of your PWM control
#WiringPi and its gpio program will be used to control the backlight
#when RB goes in SLEEP mode, and when it wakes up.
#On raspberry pi, PWMs cannot be used simultaneously with Jack sound output.
#If your are using HDMI or a Audio hat you can use backlight PWM control for the second screen
#If you are using Jack output please leave commented.
#The Screen will be switch down in Sleep mode, and switch on when it wakes up.
#On OGST, only this mode is available.
#this configuration is OPTIONAL if system.secondminitft.enabled=1
;system.secondminitft.backlightcontrol=18
# system.secondminitft.usemarquee variabla allows you to display a different
# image during running game. just creat a directory named "marquees" in media
# aside videos and images and put new images with the same name as in images
# example :
#   - /recalbox/share/roms/neogeo/media/marquees/alpham2.png
#   - /recalbox/share/roms/neogeo/media/images/alpham2.png
# if set to 1, in game the marquee images will be displayed
# if set to 0, in game the scraped images will be displayed
;system.secondminitft.usemarquee=0 
#system.secondminitft.sleepenabled allows you to enable/disable
#sleep mode for the second TFT. If set to 1 sleep mode is enabled and 
#backlight of the screen will be OFF. If set to 0, sleep mode is
#disabled and the backlight of the screen will be always On
 
;system.secondminitft.sleepenabled=0
# ------------ I - NETPLAY PARAMETERS ----------- #
## All these values are handled by Recalbox itself
global.netplay=1
global.netplay.nickname=
global.netplay.port=55435
global.netplay.relay=
global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom,colecovision
global.netplay.lobby=http://lobby.libretro.com/list/
## Configurations generated by Recalbox
emulationstation.theme.recalbox-next.colorset=1-light blue colors
emulationstation.theme.recalbox-next.gameclipview=0 - DEFAULT
emulationstation.theme.recalbox-next.gamelistview=1-standard gamelist
emulationstation.theme.recalbox-next.region=us
emulationstation.theme.recalbox-next.iconset=1-standard icons
emulationstation.theme.recalbox-next.menuset=1-light blue icons
emulationstation.theme.recalbox-next.systemview=1-vertical left
system.firsttimeuse=0
emulationstation.pad1=030000005e0400008e02000020010000:Xbox 360 Controller
emulationstation.pad0=030000005e0400008e02000014010000:Xbox 360 Controller

config.ini

 [generic]
; Device Tree Overlay
overlay_resize=16384
; uncomment next line to enable Odroid XU4 OGST
overlay_profile=hktft_cs_ogst
overlays="spi0 i2c0 i2c1 uart0"
 
[overlay_hktft_cs_ogst]
overlays="hktft-cs-ogst i2c0"

j'ai fait une réinstallé de nouveau le fichier recalbox.conf par défaut la ligne 388 est sur 0 avec ; devant , pour la ligne 398 idem ; , pareil ligne 404 , ligne 416 à la ligne 419 ; devant toute et sur la 418 j'ai 0 à la place de 1 ,ligne 428 ; au début .
sur le config.ini la ligne 5 j'ai ; au début
J'ai mis à l'identique aucun changement

cedric-debuiselle · 14 Jul 2021, 17:35

voila mon fichier recalbox.conf

 # System Variable
# You can configure your recalbox from here
# To set a variable, remove the first ; on the line
# NOTE ON CEC FOR REMOTES
# you've to plug the ODROID XU4 on the HDMI1 of your tv
# this is a limitation of the EXYNOS libcec adapter
 
# ------------ A - System Options ----------- #
#    Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=WITTYPI             # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
;system.power.switch=PIN56ONOFF          # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH           # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET    # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
## Splash screen duration
##  0 : Video will be stopped when emulationstation is ready to start.
## -1 : All the video will be played before emulationstation start (default)
## >0 : Time the video will be played before emulationstation start (in seconds)
system.splash.length=-1
## Splash videos selection
## all: select a boot video in recalbox videos and user videos
## recalbox: select a boot video only in recalbox videos
## custom: select a boot video only in user videos
## Any invalid value means "all"
system.splash.select=all
## Recalbox Manager (http manager)
system.manager.enabled=1
## Currently, only version 2 is available
system.manager.version=2
## Recalbox security
# enforce security
# samba password required
# disable virtual gamepads
system.security.enabled=0
## Recalbox API (REST)
system.api.enabled=0
## EmulationStation
### menu style
### default -> default all options menu
### none -> no menu except the game search menu
### bartop -> less menu, only needed for bartops
emulationstation.menu=default
### Select a system to show on boot (use rom directory name) (string)
emulationstation.selectedsystem=favorites
### Show the gamelist of the first or selected system on boot (0,1)
emulationstation.bootongamelist=0
### Disable system view. ES will boot and show ONLY the first or selected system (0,1)
emulationstation.hidesystemview=0
### Pa&ast;&ast;e Gamelists only. Show only games listed in gamelist.xml files (0,1)
emulationstation.gamelistonly=0
### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
emulationstation.forcebasicgamelistview=0
### Filter out adult games
### you may use emulationstation.snes.filteradultgames=1
### to filter out adult games for the snes system or any other system
emulationstation.filteradultgames=0
### Zipped gamelist preference
### Whatever you choose, emulationstation can read both compressed
### and uncompressed gamelist.xml or gamelist.zip
### However updated gamelist will be saved in your prefered format.
### Zipped format may save load time, especially on slow devices.
### 0 = gamelist.xml
### 1 = gamelist.zip
;emulationstation.zippedgamelist=1
## Arcade metasystem
## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo
## into a single "Arcade" system.
;emulationstation.arcade=1
## You may want to specify its position in the system list. (Default: 0)
## Negatives values may be used to tart from the end (-1 = last position)
;emulationstation.arcade.position=0
## Include NeoGeo or not (default: 1)
;emulationstation.arcade.includeneogeo=1
## Hide included system or leave them in the system list (default: 1)
;emulationstation.arcade.hideoriginals=1
## Virtual systems
### Activate a virtual system with all games available from all systems
;emulationstation.collection.allgames=1
### Activate a virtual system with all multiplayer games (players >= 2)
;emulationstation.collection.multiplayers=1
### Activate a virtual system with last played games
;emulationstation.collection.lastplayed=1
## Videosnaps
### Delay before videosnaps start, in millisecond. Default: 2s
;emulationstation.videosnaps.delay=2000
### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out
;emulationstation.videosnaps.loop=1
### Enable videosnap sound/music
;emulationstation.videosnaps.sound=1
## Scrapers
### Activate this option to extract region from filename when possible
;scraper.extractregionfromfilename=1
### Select the source of game's names
### 0 = from scrapper result (default)
### 1 = from filename
### 2 = from filename undecorated (i.e: (text) and [text] removed)
;scraper.getnamefrom=0 
### ScreenScraper.fr
### Force media region - if not defined, region is taken from system.language. Default: us
;scraper.screenscraper.region=eu
### Force text language - if not defined, region is taken from system.language. Default: en
;scraper.screenscraper.language=fr
### Choose the media to download among:
### screenshot: game screenshot
### title     : game title screenshot
### box2d     : Front case
### box3d     : 3D rendered case
### mixv1     : Recalbox special mix image V1 (default)
### mixv2     : Recalbox special mix image V2
;scraper.screenscraper.media=mixv1
### ScreenScraper account
;scraper.screenscraper.user=
;scraper.screenscraper.password=
## Emulator special keys
## default -> default all special keys
## nomenu -> cannot popup the emulator menu
## none -> no special keys in emulators
system.emulators.specialkeys=default
## Show or hide kodi in emulationstation (0,1)
kodi.enabled=0
## Start kodi at launch (0,1)
kodi.atstartup=0
## set x button shortcut (0,1)
kodi.xbutton=0
## Kodi can wait for a network component before starting
## waithost is the ip or hostname that must answer to a ping to validate the availability
## waittime is the maximum time waited when kodi boots
## if waitmode is required, kodi will not start if the component is not available
## if waitmode is wish, kodi will start if the component is not available
## if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50
 
 
# ------------ B - Network ------------ #
## Set system hostname
system.hostname=RECALBOX
## Activate wifi (0,1)
wifi.enabled=0
## Set wifi region
## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN)
wifi.region=JP
## Wifi SSID (string)
;wifi.ssid=new ssid
## Wifi KEY (string)
## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
## Escape your special chars (# ; $) with a backslash : $ => \$
;wifi.key=new key
## Wifi - static IP
## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask)
## if any value is missing or all lines are commented out, it will fall back to the
## default of DHCP
;wifi.ip=manual ip address
;wifi.gateway=new gateway
;wifi.netmask=new netmask
# secondary wifi (not configurable via the user interface)
;wifi2.ssid=new ssid
;wifi2.key=new key
# third wifi (not configurable via the user interface)
;wifi3.ssid=new ssid
;wifi3.key=new key
## Samba share
system.samba.enabled=1
### Virtual Gamepads
system.virtual-gamepads.enabled=1
### SSH
system.ssh.enabled=1
 
 
# ------------ C - Audio ------------ #
## Set the audio device (auto, hdmi, jack)
audio.device=alsa_card.0:hdmi-output-0
## Set system volume (0..100)
audio.volume=90
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=1
 
 
# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1
# Enable ERTM
controllers.bluetooth.ertm=1
 
## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose a driver between bluez, official and shanwan
## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
## official -> sixad drivers, support official and gasia sisaxis
## shanwan -> shanwan drivers, support official and shanwan sisaxis
controllers.ps3.driver=bluez
 
# ------------ D2 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2
 
## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1
## Gamecon controllers
## Enable gamecon controllers, for nes, snes, psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1
## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1
# ------------ D3 - Joycon Controllers ------------ #
controllers.joycond.enabled=1
 
# ------------ E - Language and keyboard ------------ #
## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=fr_FR
## set the keyboard layout (fr,en,de,us,es)
system.kblayout=fr
## Set you local time
## Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris
 
 
# ------------ F - UPDATES ------------ #
## Automatically check for updates at start (0,1)
updates.enabled=1
# Update type : default to stable
updates.type=stable
 
 
# ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
## The global value will be used for all emulators, except if the value
## is redefined in the emulator
## Set game resolution for emulators
## Please don't modify this setting
## This arch does not support the video mode switch
## (string)
global.videomode=default
## Shader set 
## Automatically select shaders for all systems
## (none, retro, scanlines)
global.shaderset=none
## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=0
## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=
## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto
## Set smooth for all emulators (0,1)
global.smooth=1
## Set rewind for all emulators (0,1)
global.rewind=1
## Set autosave/load savestate for all emulators (0,1)
global.autosave=0
## Enable retroarchievements (0,1)
## Set your www.retroachievements.org username/password
## Escape your special chars (# ; $) with a backslash : $ => \$
global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.username=
global.retroachievements.password=
## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=auto
## If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg
## Demo screensaver parameters
## Set the system list from which ES will run random games
## Empty list or unexisting key means all available systems
global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes
## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions
;global.demo.duration=90
## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens.
;global.demo.infoscreenduration=6
## Retroarch AI Translation service
## Comment out or set to 0 the following key if you don't want the AI service
global.translate=1
## Set the source and the target languages.
## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ,
##                        AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS,
##                        MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI
## Setting the translate.from key to a specified language may speed up or give more accurate results
## If translate.to key is commented, the default value is extracted from system.language or, if system.language is
## undefined, set to auto (=EN).
global.translate.from=auto
global.translate.to=auto
## zTranslate API Key
## go to https://ztranslate.net and create an account.
## validate your account, then log in and go to the settngs page
## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key:
;global.translate.apikey=RECALBOX
## Other translation service
## If you want to use another translation service or a custom API call, use this key to
## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key
;global.translate.url=
 
 
# ------------ H - EMULATORS CHOICES ----------- #
## You can override the global configurations here
## Here is the snes example
;snes.core=snes9x2010
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0
## If you do not want recalboxOS to generate the configuration for the emulator: 
;snes.configfile=/path/to/my/configfile.cfg
## Default cores for Odroid XU4
;snes.core=snes9x
n64.core=gliden64
## NeoGeo emulator 
## You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000)
neogeo.core=fbneo
## Demo screensaver parameters
## Include or exclude a particular system from the demo screensaver
## You may change the global.demo.systemlist key or include/exclude every single system
;snes.demo.include=0
## Set the session duration for a particular system
;snes.demo.duration=90
 
 
# ------------ J - TFT SECONDARY SCREEN ----------- #
#Second miniTFT screen as marquee to display scrapes and videos
#Enable it with system.secondMiniTFT.enabled=1, disable with system.secondMiniTFT.enabled=0
#this configuration is REQUIRED 
system.secondminitft.enabled=0
 
#Type of mini TFT : OGST, unknown
#Most of spi tft screen are enabled thanks to overlays in /boot/config.txt in rpi and /boot/config.ini on odroidxu4
#please check the specific configuration of your screen
#Some examples are available on the page .....
# values are :
# - overlay : screen configured through overlays in /boot/config.txt or /boot/config.ini (odroidxu4/ogst)
# - default : the rest of the world
#this configuration is REQUIRED if system.secondminitft.enabled=1
;system.secondminitft.type=overlay
 
#Choose the resolution of your screen
#miniTFT resolution  320x240 -> 240p, 480x320 -> 320p
#this configuration is REQUIRED if system.secondminitft.enabled=1
;system.secondminitft.resolution=240p
#Scraped image aspect on tft screen : fbv display option
# options available : stretch, ignore-aspect, enlarge.
# stretch : Strech (using a simple resizing routine) the image to fit onto screen if necessary
# alpha : use the alpha channel (if applicable)
# ignore-aspect : Ignore the image aspect while resizing
# enlarge : Enlarge the image to fit the whole screen if necessary
# 1 = enabled, 0 = disabled
#this configuration is REQUIRED if system.secondminitft.enabled=1
;system.secondminitft.imagestretchenabled=1
;system.secondminitft.imageenlargeenabled=0
;system.secondminitft.imagealphaenabled=0
;system.secondminitft.imageignoreaspectenabled=1
#When activating the second TFT screen, you may want to display
#game scraped video only on the second screen. This variable
#allows you to disable scraped video playing in ES during game browsing
#system.secondminitft.disablevideoines=1 disable video playing in ES
#system.secondminitft.disablevideoines=0 enable video playing in ES
#this configuration is OPTIONAL if system.secondminitft.enabled=1
;system.secondminitft.disablevideoines=1
#if the backlight of your your screen can be manage by PWM, 
#indicates the  GPIO value of your PWM control
#WiringPi and its gpio program will be used to control the backlight
#when RB goes in SLEEP mode, and when it wakes up.
#On raspberry pi, PWMs cannot be used simultaneously with Jack sound output.
#If your are using HDMI or a Audio hat you can use backlight PWM control for the second screen
#If you are using Jack output please leave commented.
#The Screen will be switch down in Sleep mode, and switch on when it wakes up.
#On OGST, only this mode is available.
#this configuration is OPTIONAL if system.secondminitft.enabled=1
;system.secondminitft.backlightcontrol=18
# system.secondminitft.usemarquee variabla allows you to display a different
# image during running game. just creat a directory named "marquees" in media
# aside videos and images and put new images with the same name as in images
# example :
#   - /recalbox/share/roms/neogeo/media/marquees/alpham2.png
#   - /recalbox/share/roms/neogeo/media/images/alpham2.png
# if set to 1, in game the marquee images will be displayed
# if set to 0, in game the scraped images will be displayed
;system.secondminitft.usemarquee=0 
#system.secondminitft.sleepenabled allows you to enable/disable
#sleep mode for the second TFT. If set to 1 sleep mode is enabled and 
#backlight of the screen will be OFF. If set to 0, sleep mode is
#disabled and the backlight of the screen will be always On
 
;system.secondminitft.sleepenabled=0
# ------------ I - NETPLAY PARAMETERS ----------- #
## All these values are handled by Recalbox itself
global.netplay=1
global.netplay.nickname=
global.netplay.port=55435
global.netplay.relay=
global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom,colecovision
global.netplay.lobby=http://lobby.libretro.com/list/
## Configurations generated by Recalbox
emulationstation.theme.recalbox-next.colorset=1-light blue colors
emulationstation.theme.recalbox-next.gameclipview=0 - DEFAULT
emulationstation.theme.recalbox-next.gamelistview=1-standard gamelist
emulationstation.theme.recalbox-next.region=us
emulationstation.theme.recalbox-next.iconset=1-standard icons
emulationstation.theme.recalbox-next.menuset=1-light blue icons
emulationstation.theme.recalbox-next.systemview=1-vertical left
system.firsttimeuse=0
emulationstation.pad0=030000005e0400008e02000014010000:Xbox 360 Controller
emulationstation.clock=1

mon fichier config.ini

 [generic]
; Device Tree Overlay
overlay_resize=16384
; uncomment next line to enable Odroid XU4 OGST
overlay_profile=hktft_cs_ogst
overlays="spi0 i2c0 i2c1 uart0"
 
[overlay_hktft_cs_ogst]
overlays="hktft-cs-ogst i2c0"

loli72 · 14 Jul 2021, 18:15

@davidb2111 Merci de ces précisions. Ca redonne un peu d'espoir.

loli72 · 14 Jul 2021, 18:16

@cedric-debuiselle Je ne comprends pas bien, ces fichiers ne sont du tout comme la solution donnée.

cedric-debuiselle · 14 Jul 2021, 19:30

@loli72 said in Retour 7.2.2 sur XU4:

@cedric-debuiselle Je ne comprends pas bien, ces fichiers ne sont du tout comme la solution donnée.

j'ai indiqué les fichier que j'ai après la mise en route de recalbox
la je vais essayer d'installer retropie ou emulationstation, car je voudrais juste allumer l'écran pour voir si il n'est pas défectueux
si il y avait une commande pour mettre le rétro-éclairage ou juste une image ça serais pratique

cedric-debuiselle · 14 Jul 2021, 20:26

Je suis tombé sur une de mes vieilles sd card avec la 6.1.1, matériel fonctionne de mon côté problème de l'OS

davidb2111 · 15 Jul 2021, 09:35

@cedric-debuiselle
Normalement, si l'OGST est détecté, tu devrais avoir un fichier système /dev/fb1
Tu peux lui envoyer des données brutes avec la commande dd, je pense.

flaker38 · 15 Jul 2021, 10:07

@davidb2111 Bonne nouvelle !
Merci d'avoir pris le temps d'analyser le problème et de nous avoir donné ces informations.
Bon courage à toute l'équipe

cedric-debuiselle · 15 Jul 2021, 10:20

@davidb2111 said in Retour 7.2.2 sur XU4:

@cedric-debuiselle
Normalement, si l'OGST est détecté, tu devrais avoir un fichier système /dev/fb1
Tu peux lui envoyer des données brutes avec la commande dd, je pense.

j'ai l'impression qu'on a un soucis de détection de l'écran, normalement je devrais d'après se que tu me dit un fichier fb1, dans l'emplacement fichier racine dev/, j'en ai aucun

davidb2111 · 15 Jul 2021, 12:27

@cedric-debuiselle

Pourrais-tu m'envoyer la sortie de la commande dmesg | grep fb stp ?

cedric-debuiselle · 16 Jul 2021, 20:53

@davidb2111
/boot$ dmesg | grep fb
[ 3.336086] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device

dit moi je voudrais mettre une signature comme toi sur mon profil j'arrive pas à trouver où sais

OyyoDams · 15 Jul 2021, 14:21

@cedric-debuiselle said in Retour 7.2.2 sur XU4:

dit moi je voudrais mettre une signature comme toi sur mon profil j'arrive pas à trouver où sais

ta réputation est de 0 donc tu ne peux pas

cedric-debuiselle · 15 Jul 2021, 14:22

@oyyodams

Retour 7.2.2 sur XU4

Want to support us ?

100
Online

98.0k
Users

28.0k
Topics

186.9k
Posts

	system.secondminitft.enabled=1
	system.secondminitft.type=overlay
	system.secondminitft.resolution=240p

	# System Variable
	# You can configure your recalbox from here
	# To set a variable, remove the first ; on the line

	# NOTE ON CEC FOR REMOTES
	# you've to plug the ODROID XU4 on the HDMI1 of your tv
	# this is a limitation of the EXYNOS libcec adapter


	# ------------ A - System Options ----------- #
	# Uncomment the system.power.switch you use
	;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
	;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
	;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
	;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
	;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
	;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
	;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
	;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

	## Splash screen duration
	## 0 : Video will be stopped when emulationstation is ready to start.
	## -1 : All the video will be played before emulationstation start (default)
	## >0 : Time the video will be played before emulationstation start (in seconds)
	system.splash.length=-1
	## Splash videos selection
	## all: select a boot video in recalbox videos and user videos
	## recalbox: select a boot video only in recalbox videos
	## custom: select a boot video only in user videos
	## Any invalid value means "all"
	system.splash.select=all

	## Recalbox Manager (http manager)
	system.manager.enabled=1
	## Currently, only version 2 is available
	system.manager.version=2

	## Recalbox security
	# enforce security
	# samba password required
	# disable virtual gamepads
	system.security.enabled=0

	## Recalbox API (REST)
	system.api.enabled=0

	## EmulationStation
	### menu style
	### default -> default all options menu
	### none -> no menu except the game search menu
	### bartop -> less menu, only needed for bartops
	emulationstation.menu=default
	### Select a system to show on boot (use rom directory name) (string)
	emulationstation.selectedsystem=favorites
	### Show the gamelist of the first or selected system on boot (0,1)
	emulationstation.bootongamelist=0
	### Disable system view. ES will boot and show ONLY the first or selected system (0,1)
	emulationstation.hidesystemview=0
	### Pa&ast;&ast;e Gamelists only. Show only games listed in gamelist.xml files (0,1)
	emulationstation.gamelistonly=0
	### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
	emulationstation.forcebasicgamelistview=0
	### Filter out adult games
	### you may use emulationstation.snes.filteradultgames=1
	### to filter out adult games for the snes system or any other system
	;emulationstation.filteradultgames=1
	### Zipped gamelist preference
	### Whatever you choose, emulationstation can read both compressed
	### and uncompressed gamelist.xml or gamelist.zip
	### However updated gamelist will be saved in your prefered format.
	### Zipped format may save load time, especially on slow devices.
	### 0 = gamelist.xml
	### 1 = gamelist.zip
	;emulationstation.zippedgamelist=1

	## Arcade metasystem
	## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo
	## into a single "Arcade" system.
	;emulationstation.arcade=1
	## You may want to specify its position in the system list. (Default: 0)
	## Negatives values may be used to tart from the end (-1 = last position)
	;emulationstation.arcade.position=0
	## Include NeoGeo or not (default: 1)
	;emulationstation.arcade.includeneogeo=1
	## Hide included system or leave them in the system list (default: 1)
	;emulationstation.arcade.hideoriginals=1

	## Virtual systems
	### Activate a virtual system with all games available from all systems
	;emulationstation.collection.allgames=1
	### Activate a virtual system with all multiplayer games (players >= 2)
	;emulationstation.collection.multiplayers=1
	### Activate a virtual system with last played games
	;emulationstation.collection.lastplayed=1

	## Videosnaps
	### Delay before videosnaps start, in millisecond. Default: 2s
	;emulationstation.videosnaps.delay=2000
	### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out
	;emulationstation.videosnaps.loop=1
	### Enable videosnap sound/music
	;emulationstation.videosnaps.sound=1

	## Scrapers
	### Activate this option to extract region from filename when possible
	;scraper.extractregionfromfilename=1
	### Select the source of game's names
	### 0 = from scrapper result (default)
	### 1 = from filename
	### 2 = from filename undecorated (i.e: (text) and [text] removed)
	;scraper.getnamefrom=0
	### ScreenScraper.fr
	### Force media region - if not defined, region is taken from system.language. Default: us
	;scraper.screenscraper.region=eu
	### Force text language - if not defined, region is taken from system.language. Default: en
	;scraper.screenscraper.language=fr
	### Choose the media to download among:
	### screenshot: game screenshot
	### title : game title screenshot
	### box2d : Front case
	### box3d : 3D rendered case
	### mixv1 : Recalbox special mix image V1 (default)
	### mixv2 : Recalbox special mix image V2
	;scraper.screenscraper.media=mixv1
	### ScreenScraper account
	;scraper.screenscraper.user=
	;scraper.screenscraper.password=

	## Emulator special keys
	## default -> default all special keys
	## nomenu -> cannot popup the emulator menu
	## none -> no special keys in emulators
	system.emulators.specialkeys=default

	## Show or hide kodi in emulationstation (0,1)
	kodi.enabled=0
	## Start kodi at launch (0,1)
	kodi.atstartup=0
	## set x button shortcut (0,1)
	kodi.xbutton=0

	## Kodi can wait for a network component before starting
	## waithost is the ip or hostname that must answer to a ping to validate the availability
	## waittime is the maximum time waited when kodi boots
	## if waitmode is required, kodi will not start if the component is not available
	## if waitmode is wish, kodi will start if the component is not available
	## if waitmode is not set or has another value, kodi will start immediately
	;kodi.network.waitmode=required
	;kodi.network.waittime=10
	;kodi.network.waithost=192.168.0.50



	# ------------ B - Network ------------ #
	## Set system hostname
	system.hostname=RECALBOX
	## Activate wifi (0,1)
	wifi.enabled=0
	## Set wifi region
	## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN)
	wifi.region=JP
	## Wifi SSID (string)
	;wifi.ssid=new ssid
	## Wifi KEY (string)
	## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
	## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
	## Escape your special chars (# ; $) with a backslash : $ => \$
	;wifi.key=new key

	## Wifi - static IP
	## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask)
	## if any value is missing or all lines are commented out, it will fall back to the
	## default of DHCP
	;wifi.ip=manual ip address
	;wifi.gateway=new gateway
	;wifi.netmask=new netmask

	# secondary wifi (not configurable via the user interface)
	;wifi2.ssid=new ssid
	;wifi2.key=new key

	# third wifi (not configurable via the user interface)
	;wifi3.ssid=new ssid
	;wifi3.key=new key

	## Samba share
	system.samba.enabled=1
	### Virtual Gamepads
	system.virtual-gamepads.enabled=1
	### SSH
	system.ssh.enabled=1



	# ------------ C - Audio ------------ #
	## Set the audio device (auto, hdmi, jack)
	audio.device=alsa_card.0:hdmi-output-0
	## Set system volume (0..100)
	audio.volume=90
	## Enable or disable system sounds in ES (0,1)
	audio.bgmusic=1



	# -------------- D - Controllers ----------------- #
	# Enable support for standard bluetooth controllers
	controllers.bluetooth.enabled=1
	# Enable ERTM
	controllers.bluetooth.ertm=1


	## Please enable only one of these
	# -------------- D1 - PS3 Controllers ------------ #
	##Enable PS3 controllers support
	controllers.ps3.enabled=1
	## Choose a driver between bluez, official and shanwan
	## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
	## official -> sixad drivers, support official and gasia sisaxis
	## shanwan -> shanwan drivers, support official and shanwan sisaxis
	controllers.ps3.driver=bluez


	# ------------ D2 - GPIO Controllers ------------ #
	## GPIO Controllers
	## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
	controllers.gpio.enabled=0
	## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
	controllers.gpio.args=map=1,2


	## DB9 Controllers
	## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
	controllers.db9.enabled=0
	## db9 arguments
	controllers.db9.args=map=1

	## Gamecon controllers
	## Enable gamecon controllers, for nes, snes, psx (0,1)
	controllers.gamecon.enabled=0
	## gamecon_args
	controllers.gamecon.args=map=1

	## XGaming's XArcade Tankstik and other compatible devices
	controllers.xarcade.enabled=1

	# ------------ D3 - Joycon Controllers ------------ #
	controllers.joycond.enabled=1


	# ------------ E - Language and keyboard ------------ #
	## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
	system.language=fr_FR
	## set the keyboard layout (fr,en,de,us,es)
	system.kblayout=fr
	## Set you local time
	## Select your timezone from : ls /usr/share/zoneinfo/ (string)
	;system.timezone=Europe/Paris



	# ------------ F - UPDATES ------------ #
	## Automatically check for updates at start (0,1)
	updates.enabled=1
	# Update type : default to stable
	updates.type=stable



	# ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
	## The global value will be used for all emulators, except if the value
	## is redefined in the emulator

	## Set game resolution for emulators
	## Please don't modify this setting
	## This arch does not support the video mode switch
	## (string)
	global.videomode=default

	## Shader set
	## Automatically select shaders for all systems
	## (none, retro, scanlines)
	global.shaderset=none

	## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
	global.integerscale=0

	## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
	global.shaders=

	## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
	global.ratio=auto

	## Set smooth for all emulators (0,1)
	global.smooth=1

	## Set rewind for all emulators (0,1)
	global.rewind=1

	## Set autosave/load savestate for all emulators (0,1)
	global.autosave=0

	## Enable retroarchievements (0,1)
	## Set your www.retroachievements.org username/password
	## Escape your special chars (# ; $) with a backslash : $ => \$
	global.retroachievements=0
	global.retroachievements.hardcore=0
	global.retroachievements.username=
	global.retroachievements.password=

	## Set retroarch input driver (auto, udev, sdl2)
	## If you don't have issues with your controllers, let auto
	global.inputdriver=auto

	## If you do not want recalboxOS to generate the configuration for all emulators (string)
	;global.configfile=/path/to/my/configfile.cfg

	## Demo screensaver parameters
	## Set the system list from which ES will run random games
	## Empty list or unexisting key means all available systems
	global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes
	## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions
	;global.demo.duration=90
	## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens.
	;global.demo.infoscreenduration=6

	## Retroarch AI Translation service
	## Comment out or set to 0 the following key if you don't want the AI service
	global.translate=1
	## Set the source and the target languages.
	## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ,
	## AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS,
	## MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI
	## Setting the translate.from key to a specified language may speed up or give more accurate results
	## If translate.to key is commented, the default value is extracted from system.language or, if system.language is
	## undefined, set to auto (=EN).
	global.translate.from=auto
	global.translate.to=auto
	## zTranslate API Key
	## go to https://ztranslate.net and create an account.
	## validate your account, then log in and go to the settngs page
	## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key:
	;global.translate.apikey=RECALBOX
	## Other translation service
	## If you want to use another translation service or a custom API call, use this key to
	## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key
	;global.translate.url=



	# ------------ H - EMULATORS CHOICES ----------- #
	## You can override the global configurations here
	## Here is the snes example
	;snes.core=snes9x2010
	;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
	;snes.ratio=16/9
	;snes.smooth=0
	;snes.rewind=1
	;snes.autosave=0
	;snes.emulator=libretro
	;snes.integerscale=0
	## If you do not want recalboxOS to generate the configuration for the emulator:
	;snes.configfile=/path/to/my/configfile.cfg

	## Default cores for Odroid XU4
	;snes.core=snes9x
	n64.core=gliden64

	## NeoGeo emulator
	## You can use pifba or a libretro core (fba2x,libretro)
	neogeo.emulator=libretro
	## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000)
	neogeo.core=fbneo

	## Demo screensaver parameters
	## Include or exclude a particular system from the demo screensaver
	## You may change the global.demo.systemlist key or include/exclude every single system
	;snes.demo.include=0
	## Set the session duration for a particular system
	;snes.demo.duration=90



	# ------------ J - TFT SECONDARY SCREEN ----------- #
	#Second miniTFT screen as marquee to display scrapes and videos
	#Enable it with system.secondMiniTFT.enabled=1, disable with system.secondMiniTFT.enabled=0

	#this configuration is REQUIRED
	system.secondminitft.enabled=1

	#Type of mini TFT : OGST, unknown
	#Most of spi tft screen are enabled thanks to overlays in /boot/config.txt in rpi and /boot/config.ini on odroidxu4
	#please check the specific configuration of your screen
	#Some examples are available on the page .....
	# values are :
	# - overlay : screen configured through overlays in /boot/config.txt or /boot/config.ini (odroidxu4/ogst)
	# - default : the rest of the world
	#this configuration is REQUIRED if system.secondminitft.enabled=1
	system.secondminitft.type=overlay

	#Choose the resolution of your screen
	#miniTFT resolution 320x240 -> 240p, 480x320 -> 320p

	#this configuration is REQUIRED if system.secondminitft.enabled=1
	system.secondminitft.resolution=240p

	#Scraped image aspect on tft screen : fbv display option
	# options available : stretch, ignore-aspect, enlarge.
	# stretch : Strech (using a simple resizing routine) the image to fit onto screen if necessary
	# alpha : use the alpha channel (if applicable)
	# ignore-aspect : Ignore the image aspect while resizing
	# enlarge : Enlarge the image to fit the whole screen if necessary

	# 1 = enabled, 0 = disabled

	#this configuration is REQUIRED if system.secondminitft.enabled=1
	system.secondminitft.imagestretchenabled=1
	system.secondminitft.imageenlargeenabled=0
	system.secondminitft.imagealphaenabled=1
	system.secondminitft.imageignoreaspectenabled=1

	#When activating the second TFT screen, you may want to display
	#game scraped video only on the second screen. This variable
	#allows you to disable scraped video playing in ES during game browsing
	#system.secondminitft.disablevideoines=1 disable video playing in ES
	#system.secondminitft.disablevideoines=0 enable video playing in ES

	#this configuration is OPTIONAL if system.secondminitft.enabled=1
	system.secondminitft.disablevideoines=1

	#if the backlight of your your screen can be manage by PWM,
	#indicates the GPIO value of your PWM control
	#WiringPi and its gpio program will be used to control the backlight
	#when RB goes in SLEEP mode, and when it wakes up.
	#On raspberry pi, PWMs cannot be used simultaneously with Jack sound output.
	#If your are using HDMI or a Audio hat you can use backlight PWM control for the second screen
	#If you are using Jack output please leave commented.
	#The Screen will be switch down in Sleep mode, and switch on when it wakes up.
	#On OGST, only this mode is available.

	#this configuration is OPTIONAL if system.secondminitft.enabled=1
	;system.secondminitft.backlightcontrol=18

	# system.secondminitft.usemarquee variabla allows you to display a different
	# image during running game. just creat a directory named "marquees" in media
	# aside videos and images and put new images with the same name as in images
	# example :
	# - /recalbox/share/roms/neogeo/media/marquees/alpham2.png
	# - /recalbox/share/roms/neogeo/media/images/alpham2.png
	# if set to 1, in game the marquee images will be displayed
	# if set to 0, in game the scraped images will be displayed
	;system.secondminitft.usemarquee=0

	#system.secondminitft.sleepenabled allows you to enable/disable
	#sleep mode for the second TFT. If set to 1 sleep mode is enabled and
	#backlight of the screen will be OFF. If set to 0, sleep mode is
	#disabled and the backlight of the screen will be always On

	;system.secondminitft.sleepenabled=0

	# ------------ I - NETPLAY PARAMETERS ----------- #
	## All these values are handled by Recalbox itself
	global.netplay=1
	global.netplay.nickname=
	global.netplay.port=55435
	global.netplay.relay=
	global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom,colecovision
	global.netplay.lobby=http://lobby.libretro.com/list/

	## Configurations generated by Recalbox
	emulationstation.theme.recalbox-next.colorset=1-light blue colors
	emulationstation.theme.recalbox-next.gameclipview=0 - DEFAULT
	emulationstation.theme.recalbox-next.gamelistview=1-standard gamelist
	emulationstation.theme.recalbox-next.region=us
	emulationstation.theme.recalbox-next.iconset=1-standard icons
	emulationstation.theme.recalbox-next.menuset=1-light blue icons
	emulationstation.theme.recalbox-next.systemview=1-vertical left
	system.firsttimeuse=0
	emulationstation.pad1=030000005e0400008e02000020010000:Xbox 360 Controller
	emulationstation.pad0=030000005e0400008e02000014010000:Xbox 360 Controller

	[generic]
	; Device Tree Overlay
	overlay_resize=16384
	; uncomment next line to enable Odroid XU4 OGST
	overlay_profile=hktft_cs_ogst
	overlays="spi0 i2c0 i2c1 uart0"

	[overlay_hktft_cs_ogst]
	overlays="hktft-cs-ogst i2c0"

Retour 7.2.2 sur XU4

Want to support us ?

100Online

98.0kUsers

28.0kTopics

186.9kPosts

100
Online

98.0k
Users

28.0k
Topics

186.9k
Posts