February 2019 Beta Version

Einklinker

@acris
How i can make full screen on amiberry?
It’s not working in amiberry menu. Maybe you know a CONFIG for the .uae file.

Thanks

Bkg2k

@olivierdroid92 Le support neogeo CD est toujours 'in-progress" chez fba-libretro, donc il faut s'attendre à pas mal de soucis et de petit bug jusqu'à ce qu'ils sortent une "stable" de leur coté
Nous b*mperons le core à ce moment là.

Bkg2k

Warning!

A serious pad issue has been discovered tomorrow in the beta version. It has already been analysed and fixed.
This issue is affecting pad mappings as well as the Reicast emulator, Moonlight and Kodi, preventing any correct tests. Moreover, it also prevent the pre-mapped pad database from being properly completed.

We will update the beta images very soon.

Attention!

Un problème très impactant a été découvert hier sur la bêta sur toutes les plateformes. Il a été analysé et corrigé dans la foulée.
Ce problème impacte le remapping des pads ainsi que l'emulateur Reicast, Moonlight et kodi, empêchant tout test dans des conditions correctes. En outre, il nous empêche aussi de compléter correctement la base de pads/joystick pré-configurés.

Nous remettrons à jour les images de la bêta d'ici peu.

cibine

the nespi case+ safe switch for on/off doesn't work anymore and le red light doesn't light anymore too.
unable to pair ps4 controllers, recognize them but unable to pair

CONNECTION REFUSED by putty ?!!!!! WTF i can't configure anything .....

This beat is way worst than the christmas one for me :(((((((((((((((((

raspbery pi3B+

cibine

@mimizen pareil ! tu peux essayer ca https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-manually-(EN)

Mimizen

@cibine Merci, mais vu que j'ai aussi besoin d'utiliser mes manettes pour ma PS4, je n'ai pas envie d'avoir à me connecter en SSH a chaque changement... j'ai commandé un dongle BT, on verra le résultat.

Bkg2k

@cibine présenté comme ça ne donne pas vraiment envie de répondre, ni de faire le moindre effort pour aider...

Mais je vais quand même essayer. Tout est sur la SD, ou le share et sur clef USB/NAS/Autre support externe?
Quand le SSH ne fonctionne plus, c'est qu'il y a eu un soucis durant le premier démarrage. Je ne peux que te conseiller de reflasher la SD.

PilafSama

Yo, encore un petit retour

Test sur la amiga cd32 vec les réglages de base et le thème par défaut mais bios mis à jour :

Config :
RPI3
Manette 8Bitdo SF 30 PRO
Micro sd Kingston 16 et 32 go
Clé USB 3.0 Sandisk 64go

Certains jeux fonctionnent bien au format ZIP et d'autres non.
Ceux qui ne fonctionnent pas font planter emulstation, donc obligé de reboot par le bouton physique.
Par contre une fois décompressés, il passent sans soucis même s'ils ne tournent pas en fullspeed (ex : Flink)

Le problème peut-il venir de la taille du jeu ?

Bkg2k

@pilafsama de ce que j'ai pu voir, Amiberry décompresse les zip dans /tmp.
Sauf que sur Recalbox, /tmp est un ramdisk, donc il prends sur la ram disponible! Si l'image CD décompressée pèse lourd (et c'est le cas de Flink), on imagine rapidement ce qui arrive: toute la ram est avalée par l'image décompressée et ni l’émulateur, ni EmulationStation n'arrivent à se lancer/relancer correctement

PilafSama

@bkg2k du coup ça explique pourquoi les jeux volumineux ne se lancent pas. Si j'ai bien compris, Amiberry prend toute la ram pour pouvoir décompresser le jeu ?

Ça expliquerait aussi que même décompressés les gros jeux ont du mal à bien tourner ou bien ça n'a rien à voir ?

La solution serait donc de laisser au format zip seulement les "petits" jeux et décompresser les autres !

Merci

JCreazy

Hello. The Beta is running great but I am having an issue with NES roms specifically. I don't know if it's a recalbox issue or something else. All the default freeware NES roms work fine but when I add my own they go to the black screen and then back to the game list. I saw in the original post that if that happens then to remap the controller which I've done with the same result. Recalbox does recognize my controller so I assume that isn't the issue. The really odd thing is that my roms were working fine just yesterday. I have tried reflashing the card with a fresh setup and still nothing. I am using a Raspberry Pi 3B+ and running the roms from USB but does the same with internal storage.

olivierdroid92

@JCreazy
Hello.
I didn't experienced any issue with NES Rom.
Can you please tell us and provide on which dedicated Rom you had issue?
Note: I done test on XU4 and RPI3B with and without USB card.
All my Rom are unzipped.

Bkg2k

@pilafsama exactement.
C'est quelque chose qu'il faudra note dans la documentation finale.

Sapiens

Hi first thank u for doing that Job.
i use mix of rpi 2&3 and some of first generation
for my test with ur beta build i use the rpi2 with enimax ew-7811utc (useless no driver support?) so i use TP-Link TL-WN823N
But found some problem:
no support for WLAN .AC WIFI dongle with chip RT8812au - i was buy some for increase my wlan and now all 3 are useless?
Wifi key configuration no warn if i use symbols like ?!.%& and so i waste a lot of time.
then i start in Kodi (i use libreelec on all my rpi to receive tv as sat>ip) i use an app on my android as remote control - some function i can't use, for example sound volume high and low (mute was working)
next problem system (kodi) hang a lot and freeze sometimes only restart would help
i think recalbox is a good idea with kodi inclusive - but please guys no driver for new wifi dongle? for tv i need a lot of bandwith to handle video data.
in few days i will try the rpi3 image
Greetings Sapiens

JCreazy

@olivierdroid92
It seems I found the issue, for some reason none of the roms in the set I had would boot but after trying a different set they work fine.

Also, on an unrelated note, on occasion when I try to scrape, I get an error saying no systems were found, sometimes if I reboot it will work fine and other times it won't, I haven't quite pinpointed why this is occuring.

Bkg2k

All image updated to include important fixes

Please download and flash the beta version. There were important pad issues in the previous beta, mainly affecting Reicast, Moonlight and Kodi.

Using this new beta version, if your pad/joystick/whatever is not automatically mapped and needs to be remapped manually, you can contribute to make the pre-configured database growing:

Map your pad the most logical way. Use select as Hotkey if there is no dedicated button. Leave button/dpad/joystick unmapped if they do not exist physically on your device.
SSH your recalbox and cat the file /recalbox/share/system/.emulationstation/es_input.cfg
Copy the latest <inputConfig> ... </inputConfig> block and post it in this thread.

This will help future users to get their pad/jostick/whatever auto-magically configured. Thanks!

olivierdroid92

@Bkg2k
Image : 2019-02-24
Board : RPI3

USB Wired PAD : USB Wired iNNEXT SFC Snes
<inputConfig type="joystick" deviceName="USB Gamepad " deviceGUID="03000000790000001100000010010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="10">
<input name="a" type="button" id="1" value="1" code="289" />
<input name="b" type="button" id="2" value="1" code="290" />
<input name="down" type="axis" id="1" value="1" code="1" />
<input name="hotkey" type="button" id="8" value="1" code="296" />
<input name="left" type="axis" id="0" value="-1" code="0" />
<input name="pagedown" type="button" id="5" value="1" code="293" />
<input name="pageup" type="button" id="4" value="1" code="292" />
<input name="right" type="axis" id="0" value="1" code="0" />
<input name="select" type="button" id="8" value="1" code="296" />
<input name="start" type="button" id="9" value="1" code="297" />
<input name="up" type="axis" id="1" value="-1" code="1" />
<input name="x" type="button" id="0" value="1" code="288" />
<input name="y" type="button" id="3" value="1" code="291" />

USB Wired PAD : Wired GameStop PS4 Fun Controller
inputConfig type="joystick" deviceName="GameStop PS4 Fun Controller" deviceGUID="03000000c01100000140000011010000" deviceNbAxes="6" deviceNbHats="1" deviceNbButtons="14">
<input name="a" type="button" id="2" value="1" code="306" />
<input name="b" type="button" id="1" value="1" code="305" />
<input name="down" type="hat" id="0" value="4" code="16" />
<input name="hotkey" type="button" id="12" value="1" code="316" />
<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
<input name="joystick2left" type="axis" id="2" value="-1" code="2" />
<input name="joystick2up" type="axis" id="5" value="-1" code="5" />
<input name="l2" type="button" id="6" value="1" code="310" />
<input name="l3" type="button" id="10" value="1" code="314" />
<input name="left" type="hat" id="0" value="8" code="16" />
<input name="pagedown" type="button" id="5" value="1" code="309" />
<input name="pageup" type="button" id="4" value="1" code="308" />
<input name="r2" type="button" id="7" value="1" code="311" />
<input name="r3" type="button" id="11" value="1" code="315" />
<input name="right" type="hat" id="0" value="2" code="16" />
<input name="select" type="button" id="8" value="1" code="312" />
<input name="start" type="button" id="9" value="1" code="313" />
<input name="up" type="hat" id="0" value="1" code="16" />
<input name="x" type="button" id="3" value="1" code="307" />
<input name="y" type="button" id="0" value="1" code="304" />
</inputConfig>

BT Pad : 8bitdo SN30 Pro
inputConfig type="joystick" deviceName="8Bitdo SN30 Pro" deviceGUID="05000000c82d00000161000000010000" deviceNbAxes="6" deviceNbHats="1" deviceNbButtons="16">
<input name="a" type="button" id="0" value="1" code="304" />
<input name="b" type="button" id="1" value="1" code="305" />
<input name="down" type="hat" id="0" value="4" code="16" />
<input name="hotkey" type="button" id="2" value="1" code="306" />
<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
<input name="joystick2left" type="axis" id="2" value="-1" code="2" />
<input name="joystick2up" type="axis" id="3" value="-1" code="5" />
<input name="l2" type="button" id="8" value="1" code="312" />
<input name="l3" type="button" id="13" value="1" code="317" />
<input name="left" type="hat" id="0" value="8" code="16" />
<input name="pagedown" type="button" id="7" value="1" code="311" />
<input name="pageup" type="button" id="6" value="1" code="310" />
<input name="r2" type="button" id="9" value="1" code="313" />
<input name="r3" type="button" id="14" value="1" code="318" />
<input name="right" type="hat" id="0" value="2" code="16" />
<input name="select" type="button" id="10" value="1" code="314" />
<input name="start" type="button" id="11" value="1" code="315" />
<input name="up" type="hat" id="0" value="1" code="16" />
<input name="x" type="button" id="3" value="1" code="307" />
<input name="y" type="button" id="4" value="1" code="308" />
</inputConfig>

BT Pad : 8Bitdo SF30 Pro
<inputConfig type="joystick" deviceName="8Bitdo SF30 Pro" deviceGUID="05000000c82d00000061000000010000" deviceNbAxes="6" deviceNbHats="1" deviceNbButtons="16">
<input name="a" type="button" id="0" value="1" code="304" />
<input name="b" type="button" id="1" value="1" code="305" />
<input name="down" type="hat" id="0" value="4" code="16" />
<input name="hotkey" type="button" id="2" value="1" code="306" />
<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
<input name="joystick2left" type="axis" id="2" value="-1" code="2" />
<input name="joystick2up" type="axis" id="3" value="-1" code="5" />
<input name="l2" type="button" id="8" value="1" code="312" />
<input name="l3" type="button" id="13" value="1" code="317" />
<input name="left" type="hat" id="0" value="8" code="16" />
<input name="pagedown" type="button" id="7" value="1" code="311" />
<input name="pageup" type="button" id="6" value="1" code="310" />
<input name="r2" type="button" id="9" value="1" code="313" />
<input name="r3" type="button" id="14" value="1" code="318" />
<input name="right" type="hat" id="0" value="2" code="16" />
<input name="select" type="button" id="10" value="1" code="314" />
<input name="start" type="button" id="11" value="1" code="315" />
<input name="up" type="hat" id="0" value="1" code="16" />
<input name="x" type="button" id="3" value="1" code="307" />
<input name="y" type="button" id="4" value="1" code="308" />

Desolé, je ne sais pas comment mettre tout ca en mode editeur

gnubit

	</inputConfig>
	<inputConfig type="joystick" deviceName="Logitech Gamepad F710" deviceGUID="030000006d0400001fc2000005030000" deviceNbAxes="4" deviceNbHats="1" deviceNbButtons="13">
		<input name="a" type="button" id="1" value="1" code="305" />
		<input name="b" type="button" id="0" value="1" code="304" />
		<input name="down" type="hat" id="0" value="4" code="16" />
		<input name="hotkey" type="button" id="10" value="1" code="316" />
		<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
		<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
		<input name="joystick2left" type="axis" id="2" value="-1" code="3" />
		<input name="joystick2up" type="axis" id="3" value="-1" code="4" />
		<input name="l2" type="button" id="6" value="1" code="312" />
		<input name="left" type="hat" id="0" value="8" code="16" />
		<input name="pagedown" type="button" id="5" value="1" code="311" />
		<input name="pageup" type="button" id="4" value="1" code="310" />
		<input name="r2" type="button" id="7" value="1" code="313" />
		<input name="right" type="hat" id="0" value="2" code="16" />
		<input name="select" type="button" id="8" value="1" code="314" />
		<input name="start" type="button" id="9" value="1" code="315" />
		<input name="up" type="hat" id="0" value="1" code="16" />
		<input name="x" type="button" id="3" value="1" code="308" />
		<input name="y" type="button" id="2" value="1" code="307" />
	</inputConfig>
</inputList>

gnubit

@bkg2k

https://forum.recalbox.com/topic/16576/february-2019-beta-version/17

F710 controller working on latest beta thanks (recalbox.2019-02-23-beta.x86_64.)

gnubit

@bkg2k

https://forum.recalbox.com/topic/16576/february-2019-beta-version/18

Issue still persists on latest build, Kodi also fails to start on x64 image (both by selecting it form menu and shortcut button Y). No error on es_launch_stdout.log

/recalbox/share/system/logs/es_launch_stderr.log

# cat es_launch_stderr.log 
usage: emulatorlauncher.pyc [-h] [-p1index P1INDEX] [-p1guid P1GUID]
                            [-p1name P1NAME] [-p1devicepath P1DEVICEPATH]
                            [-p1nbaxes P1NBAXES] [-p2index P2INDEX]
                            [-p2guid P2GUID] [-p2name P2NAME]
                            [-p2devicepath P2DEVICEPATH] [-p2nbaxes P2NBAXES]
                            [-p3index P3INDEX] [-p3guid P3GUID]
                            [-p3name P3NAME] [-p3devicepath P3DEVICEPATH]
                            [-p3nbaxes P3NBAXES] [-p4index P4INDEX]
                            [-p4guid P4GUID] [-p4name P4NAME]
                            [-p4devicepath P4DEVICEPATH] [-p4nbaxes P4NBAXES]
                            [-p5index P5INDEX] [-p5guid P5GUID]
                            [-p5name P5NAME] [-p5devicepath P5DEVICEPATH]
                            [-p5nbaxes P5NBAXES] -system SYSTEM [-rom ROM]
                            [-emulator EMULATOR] [-core CORE] [-ratio RATIO]
                            [-demo DEMO] [-netplay NETPLAY]
                            [-netplay_ip NETPLAY_IP]
                            [-netplay_port NETPLAY_PORT] [-hash HASH]
                            [-extra EXTRA]
emulatorlauncher.pyc: error: unrecognized arguments: ��
#

Thanks again team recalbox.

February 2019 Beta Version

Warning!

Attention!

Want to support us ?

145
Online

96.9k
Users

27.8k
Topics

186.5k
Posts

February 2019 Beta Version

Warning!

Attention!

Want to support us ?

145Online

96.9kUsers

27.8kTopics

186.5kPosts

145
Online

96.9k
Users

27.8k
Topics

186.5k
Posts