Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[Zyphos]

@dalittlebosssam
Hey, Not a solution for your problem but I have the same Setup with the latest beta and the shutdown script installed and it works fine for me. So I think its not a problem of the beta.

[paradadf]

@zyphos I didn’t say you used ES Scraper, but lots of people are complaining about ES Scraper not working, and that is the most ineffective Scraper availabe.
I’m not a a programmer, coder or have anything to do with software development in my daily basis, so you only interest to learn is needed.
And what I pointed out is that your solution is over-complicated and there are better and easier ways to scrape. Regardless of you being on mac or scraping directly from the rpi. Check the link I posted and take a look at fastscraper. There are intructions on how to use it.

[toniosj]

Music frontend loop

When I exit a game, the song loops until I change system on ES. I use own music files on music folder.

[toniosj]

Cant save Favorites

Save favorites doesnt work. If I mark games to favorites, when I reboot, Recalbox crash. I force Recalbox starts and favorites games dont be saved.

[jojo280]

Hi all,

I have make a fresh install of the beta on my Pi3b+, but when I scrap no gamelist.xml was created in the folder.

[Bloodsurfer]

@toniosj said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

Cant save Favorites

Save favorites doesnt work. If I mark games to favorites, when I reboot, Recalbox crash. I force Recalbox starts and favorites games dont be saved.

Yes, I've experienced that too. Using the latest beta on a 3B+.

ES also sometimes crashes instantly when marking favorites (while I was going through a collection of around a hundred roms and after the third or forth game I was trying to mark it crashed).

[aerao]

@toniosj same problems, Save favorites doesnt work too => recalbox crash. Beta version is not yet stable. You have to be patient

[kos]

Prompt why on the Chinese gamepad analog sticks work as a simple cross? When pressing home button it on the computer and retropie all switches , recalbox not be switched. What could be the problem?

[Papi]

Bonjour la communauté,

Comment dois-je exactement mettre à jour recalbox.conf pour ne pas briquer ma SD ?

1. Stop ES.
2. Mettre à jour le fichier recalbox.conf
3. Start ES
4. Lancer la mise à jour depuis le menu d'options de la recalbox

Voici le texte que j'ai actuellement.

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=0

Update type : default to stable

updates.type=stable

[fliflo24]

hello!
i install recalbox from direct link PI3 B+ and i edit recalbox.conf like this :

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=1

Update type : default to stable

updates.type=https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com

when i ran update, an error message as show. someone help me ?

or else, reicast does not lunch, i need to replace bios from others download here DO NOT POST LINKS TO COPYRIGHTED CONTENT!!!
now it's work.

and last, i need to set overclock on turbo or extrem mode to have correct fps rate with n64, reicast. is it normal on rpi 3b+ ? doesn't be more powerfull than rpi2 ?

i will test psx now ^^

[mrnebu]

oh santa, what should i do?!

[acris]

Hello everybody,

please read 1st post : Santa Claus exists!

Disable updates in the appropriate menu. Until the final release is available, NO UPDATE AT ALL.

Images links:

Rasberry Pi:
•Pi 3B & 3B+ : 1st post
•Pi 2 : not yet available (compilation in progress, please wait...)
•Pi 0 & 1 : not yet available (compilation in progress, please wait...)

Odroids:
•C2 : 1st post
•XU4(Q) : 1st post

PC:
•32bits: 1st post
•64bits: 1st post

[OyyoDams]

Santa Claus is working hard

[Suriv]

Thank you very much for that great effort. Congratulations to the team.

Merry Christmas

[Snipy]

Cette ligne "https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com" et toujours à modifier ou non ?

Merci en tout cas pour tout ce boulot !

[OyyoDams]

@snipy said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

Cette ligne "https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com" et toujours à modifier ou non ?

Non ce n'est plus d'actualité

[mYSt]

merci, so far so good, le redémarre semble mieux marcher maintenant
Sinon juste une remarque les caractères du type π ou Ω qui normalement apparaissent après la lettre Z alphabétiquement appairassent maintenant avant la lettre A, y'a t'il eu une modif concernant le tri alphabétique des listes?

[simba51]

Oui! La magie de Noêl !!!
Merci beaucoup de ce cadeau que la Team nous fait aujourd'hui avec cette version riche en correction.
Encore des bugs, notamment avec le scappeur ES et la gestion des "Favoris" qui ne fonctionne pas encore. Mais la version stable s'annonce bien prochainement. Bravo à vous les devs. Et continuer à nous faire rêver en 2019.
Bon Noêl à tous et bonne fête de fin d'année.

[Pattick76]

@oyyodams Merry Christmas to everybody!How can I update my existing beta on my Raspi3B+ -Multibootsystem? Is there any link online for inserting into the Recalbox config-file for just updating only the recalbox-system like before via menu, because writing a complete recalbox-image will erase my other 2 systems (Raspbian & Libreelec) on my raspberry 3B+ preferred SD-Card? (My games are stored on external USB). I don't want to switch the SD-Cards for playing.!
Thanks for help.

[lhari84]

Hi,

Thanks for new release! First, in my point of view it‘s a good decision making a hard cut when changes in new version are too complex for an update. Doing a fresh installation is no big deal at all an I‘m sure it avoids mans update related issues.

Unfortunately I also have to report an issue, Wifi still seems to make some troubles:
It seems it connects faster and more stable than latest beta, but on my side there are heavy interferrences with internal bluetooth. I‘m connected to a 2,4 GHz network and as soon as I activate Wifi, Bluetooth lags or even loses connection until i go closer (reduce distance to <2 meters).
Further I want do report that Recalbox (or Emulationstation) hang about at least 1 minute after first Wifi activation. No reaction at all. Already wanted to remove power supply when it suddenly has shown message „Wifi activated“ though.

Thanks for spending so many of your time for this project, it‘s really great and I‘m looking forward to final new version. Especially because I have big issues with all newer 8bitdo controllers (random loss of whole pairing), which seems to be gone with new version!

and: Happy x-mas!

Edit:
Please ignore interferrence issue for now. Rebooted my Wifi Repeater and it‘s gone for now. Haven‘t ever had such an issue befor, I‘ll keep you informed.