Recalbox 18.07.13 is out!
Time was missinf for the blog post ... This is mainly a fix release :
- Bump desmume to desmume2015
- fix: SELECT as hotkey sometimes messy with arcade
- ES: Arcade roms fullname in Netplay GUID
- ES: No game launch if core doesn't match
- ES: Game not listed in lobby if password protected
- ES: remove netplay popup to prevent some crash
- Wifi: options were not saved with nfs cifs or configurations - fixed
- Daphne: joystick improvements / bug corrections
- N64 rice: fix blank screen
- N64 GlideN64 and other plugins: also fix blank screen
- pifba: make sure it's only available for systems supporting it
- Set the recalbox tag for netplay elsewhere
darth last edited by
darkanezi last edited by
Hello! I've updated the system with the last 18.07.13 update and now my N64 roms stopped working. I was using mupen64plus + Gliden64 which worked perfectly before.
If I change it to Libretto+Glupen64 it works, but the quality of this combination is terrible. Any hints or configs that I could do to fix that?
Thanks a million in advance!
Francis Labo last edited by
Made the update on my pi3b and it crashed. Message of emulation station error try manually.. what can i do ?
Juan Daniel last edited by Juan Daniel
I can´t update either. When the download ends, Recalbox starts to reboot, the progress bar appears only for a second. After that Recablox reboots again and it starts normally. A popup appears again to say me that there is an update available.
I see this in the log:
[ 421.35] ------------ Will process to the recalbox upgrade from https://lb-archive-prod.recalbox.com ------------
[ 421.37] Need 261432375
[ 421.40] Needed size for upgrade : 255305kb
[ 421.42] Will download 255305kb of files in /recalbox/share/system/upgrade where 18608772kb is available. Free disk space after operation : 18353467kb
[ 421.44] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/boot.tar.xz downloaded
[ 421.47] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/root.tar.xz downloaded
[ 421.50] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/boot.tar.xz.sha1 downloaded
[ 421.52] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/root.tar.xz.sha1 downloaded
[ 421.55] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/root.list downloaded
[ 421.58] boot.tar.xz checksum verified
[ 421.60] root.tar.xz checksum verified
[ 421.63] All files downloaded and checked, ready for upgrade on next reboot
[ 425.72] Stopping S94manager
[ 426.04] Stopping S92switch
[ 426.06] script /recalbox/scripts/powerswitch.sh already stopped !
[ 426.98] Stopping Emulationstation
[ 427.06] Saving ALSA mixers configuration
[ 427.38] Stopping S13fbcp
[ 428.03] recalbox.conf saved to /boot partition
[ 1.63] Let's play the video for 20 seconds
[ 3.21] /boot/recalbox-backup.conf not found
[ 5.07] Restoring sound config before reboot
[ 5.13] Upgrading RA Core names
[ 12.83] Stopping S94manager
[ 13.06] Stopping S92switch
[ 13.07] script /recalbox/scripts/powerswitch.sh already stopped !
[ 13.70] Stopping Emulationstation
[ 13.77] Saving ALSA mixers configuration
[ 14.05] Stopping S13fbcp
[ 14.59] recalbox.conf saved to /boot partition
[ 1.63] Let's play the video for 20 seconds
[ 3.07] /boot/recalbox-backup.conf not found
[ 3.84] No need to upgrade configuration files
[ 4.23] Will not start S13fbcp : system.fbcp.enabled is set to 0
[ 4.58] starting new log
[ 4.60] converting dos to unix carriage return characters
[ 4.99] setting hostname to RECALBOX
[ 5.13] setting audio volume to 26
[ 5.14] setting timezone to Europe/Madrid
[ 5.17] updated wifi settings : ssid=
[ 5.27] ---- recalbox-config.sh ----
[ 5.32] setting audio volume : 26
[ 5.33] setting keyboard layout to es
[ 5.34] updated wifi settings : ssid=
[ 5.49] Simple mixer control 'PCM',0
[ 5.50] Capabilities: pvolume pvolume-joined pswitch pswitch-joined
[ 5.50] updated wifi settings : ssid=Mi~FibraC04B
[ 5.51] Setting volume for numid=3
[ 5.52] Playback channels: Mono
[ 5.53] Limits: Playback -10239 - 400
[ 5.54] Setting volume for numid=2
[ 5.55] Mono: Playback 0 [96%] [0.00dB] [on]
[ 5.57] Setting volume for numid=1
[ 5.59] Setting volume for numid=5
[ 5.62] amixer: Control default element write error: Operation not permitted
[ 5.62] Setting volume for numid=4
[ 5.65] Restoring ALSA mixers configuration
[ 5.81] setting audio to hdmi
[ 5.84] ---- recalbox-config.sh ----
[ 5.87] setting audio output mode : hdmi
[ 5.89] numid=3,iface=MIXER,name='PCM Playback Route'
[ 5.90] ; type=INTEGER,access=rw------,values=1,min=0,max=2,step=0
[ 5.92] : values=2
[ 6.33] starting emulationstation with lang = es_ES
[ 7.27] ---- recalbox-config.sh ----
[ 10.51] Starting S92switch
[ 10.54] script /recalbox/scripts/powerswitch.sh [ STARTED ]
[ 11.66] Starting S94manager
[ 11.82] ... Starting manager v2
[ 12.07] Will not start pm2 : system.api.enabled is set to 0
[ 14.22] starting xarcade2jstick
[ 14.57] xarcade2jstick : no official stick found, looking for keyboard encoder now ...
Kind regards and thanks for Recalbox.
Moritz last edited by
I was playing with friends using password to prevent other players join and lag the game, now I can't join the host anymore because the game don't show in lobby, will we be able to create private games?
@moritz not over ES... you‘ll need to join over retroarch menu directly.
@moritz as long as retroarch doesn't give a solution to easily handle passwords, then you must join through RA
@juan-daniel please check logs in the upgrade folder
Tue Jan 1 01:00:02 UTC 1980
Tue Jan 1 01:00:03 UTC 1980
Tue Jan 1 01:00:03 UTC 1980
mount: mounting /dev/root on / failed: Invalid argument
@juan-daniel Can you make a support archive please ?
@juan-daniel Do I correctly assume you've installed recalbox though NOOBS ?
@substring No, I downloaded the ISO from Recalbox website a long time ago (before than version 4.0), and I have been updated until now.
If it will take you a lot of time, I can download a clean version from the website and set the games and savegames, it´s not a problem.
Thank you and kind regards.
100 000 000 de mercis à la team pour le travail tout en finesse (la legende du bouton X qui change si on a activé netplay/kofi ou l'un des deux, le temps de chargement, les ptits trucs à droite à gauche...) et pour Daphné !!! j'ai enfin passé quelques niveauxà Dragon's Lair, EN VRAI, j'ai limite la larme à l'oeil...
QUE DU BONHEUR ! MERCI !
@glook quel sens de l'observation
Dotto Raus last edited by
"Insert coin button is not working" in Mame games so they are impossible to play even using key "5" of my keyboard. Fba and Fba lbretro games seems to be ok and the "select" is working.
I thought with 13.07.18 update that issue was solved infact it was coming out with the previous upgrade but nothing.
Maybe i've done something wrong, can you help me please?
RCP last edited by
Para as minhas roms , a atualização funcionou bem com exceção ao fba. Então peguei outro cartão e queimei uma imagem limpa e para minha surpresa as roms que continuaram rodando no cartão atualizado não funcionam com a instalação à partir do zero. ( fds / dreamcast / sega cd / pcengine cd / msx / amiga600 / amiga1200 / odyssey / colecovision) . Já baixei novamente a imagem à partir do site e refiz a instalação mas essas roms continuam não funcionando, alguma dica de como proceder ? muito obrigado.
Scorpio70 last edited by
Merci à toute la team pour ce super boulot
Gimpi last edited by
nice thx for the update
is it just me or are the input lag are minimized now ?
freaking work will donate as soon as possible thy @Substring