Problem with recalbox on pi3 via NOOBS

[xristoskon]

no cause i want multi boot system , have u got an multi image ?

[Substring]

@xristoskon nope

[Anderson 72]

@xristoskon said in Problem with recalbox on pi3 via NOOBS:

I have just installed debian and recalbox , on pi 3 . As the debian boots correctly , recalbox doesnt boot at all and my monitor goes off while it boots , it means it gets no sygnal .
What should i do
Bellow my configs :
recalbox-boot.conf:

sharedevice=INTERNAL
global.videomode=default

config.txt:

uncomment if you get no picture on HDMI for a default "safe" mode

#hdmi_safe=1

disable_overscan=1

uncomment to force a specific HDMI mode (this will force VGA)

#hdmi_group=1
#hdmi_mode=1

comment to get jack audio

#hdmi_drive=2

Using /etc/modules is deprecated and no longer supported on 4.4 kernel

So manually enable audio

dtparam=audio=on

config_hdmi_boost=0

force hdmi while the tv can take time before sending the signal on the hdmi output

#hdmi_force_hotplug=1

uncomment for composite PAL

#sdtv_mode=2

uncomment for lirc-rpi

#dtoverlay=lirc-rpi

if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it

boot_delay=3

uncomment if you don't want the rainbow at startup

disable_splash=1

Overclock

gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

#avoid_safe_mode=1
disable_overscan=0
overscan_scale=1
sdtv_mode=2
hdmi_group=1
hdmi_mode=16

any suggestions ?

I have some ploblem with my recalbox in multiboot.

[Substring]

May be related to some newer pi3 boards, that's what the raspberry guy told me

[maxmoro77]

@Substring Also for me, Recalbox via NOOBS does not work at all! If I use your img file downloaded from here everything is fine!
But, if I use NOOBS to install RECALBOX with other o.s. (or even alone!) does not work !!
The result is a white (or sometimes gray) screen. I tried every possible combination of the config.txt file but with no result! I think the problem is in the same image of Recalbox for noobs ...
I use Raspberry Pi 3 (not new B+ model obviously!).

[Substring]

@maxmoro77 i'm not sure how you installed recalbox with noobs, i haven't had any problem so far

[lfer23]

I have exactly the same issue. I had working triple boot with PINN, Libreelec, Recalbox and Raspbian. since last manual reinstall from PINN, I have Screen issue with the screen resolution. The OS seems to boot because there is sound from the HDMI but the resolution is out of range.

[maxmoro77]

@substring I downloaded the last version of NOOBS (2.7.0) from raspberry site:
https://www.raspberrypi.org/downloads/noobs/
Recalbox is not compatible with this version of NOOBS.....
Now I found an old version (NOOBS 2.4.5) and whit this one all works fine....

[Substring]

@maxmoro77 raspberry told me they "disabled" recalbox until we're compatible with 3b+. This could be linked

[Juakin]

Exact same issue here...

[Dagui]

Had the same issue with the same dualboot, solved it with using the 2.4 version of Noobs.