RPI 3 / Recalbox/ Mayflash Adapter / Gamecube Controller

[jeypy]

ok ich hab mal ein wenig weiter gegoogelt. Könnte das hier vielleicht helfen? Bin nicht zu Hause und kann es im Moment nicht testen, bzw. wüsste ich auch nicht, ob ich es so richtig einbinde.

recalbox/fsoverlay/etc/modprobe.d/usbhid.conf

#Mayflash Wii Controller Adapter //ist der Name hier wichtig?
options usbhid quirks=0x0079:0x1843:0x040

Den quirks Eintrag hab ich von einer anderen Seite.

Hab diesen Eintrag genommen und die Werte hier übernommen.
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT }
Ist das zu einfach gedacht, oder kann man das so machen?

Oder kann ich diesen Patch in Recalbox integrieren. Und wenn ja, die große Frage wie.

[Substring]

@jeypy can you make a support archive ? http://recalbox/help

[jeypy]

@substring said in RPI 3 / Recalbox/ Mayflash Adapter / Gamecube Controller:

http://recalbox/help

Ok I do, but first you have to tell my what to do?
So where to I put my information?

I find the usbhid.conf, but can't edit, because Terminal says read-only file system. Can I find it on the SD-Card? And where to find?
And is there anything else to do, apart from this?
And when I edit the usbhid.conf should I #comment everything except for my own usbhid quirks line?

Thanks & Sorry again

[jeypy]

sorry my fold.

https://file.ac/Im14t5ltYso/

[jeypy]

Works perfectly Thanks for your help!
Next Problem, Hyperion. I read that your'r in. Is there an opportunity to help you?

[paradadf]

@jeypy hey, you need to reply to my message wirh the @myname so that I get the notification. Anyway, good you found what was needed.
What was exactly the quirks you used in lrder to add it by default?

[Substring]

@jeypy we'll probably need some testers once hyperion is ready. So yes, keep an eye on the forum

[jeypy]

@substring perfect. I would give it a shoot

[jeypy]

@paradadf that one from above.

#Mayflash Wii/Gamecube Controller Adapter
options usbhid quirks=0x0079:0x1843:0x040

Comment the rest out and just add this one.

Next question, I can't activate the rumble function of my Controllers. Every time I change the settings in the mupen64 config, the system chanced it too default, after restart. Don't matter which config I change. The mupen64 itself, or the mupen64auto config. Do you have an idea?

[paradadf]

@jeypy please, don’t mix different topics, create a new one.
But to answer you... rumble isn’t currently supported.