@substring yes of course.

https://file.ac/v25charQVjA/

@paradadf that one from above.

#Mayflash Wii/Gamecube Controller Adapter
options usbhid quirks=0x0079:0x1843:0x040

Comment the rest out and just add this one.

Next question, I can't activate the rumble function of my Controllers. Every time I change the settings in the mupen64 config, the system chanced it too default, after restart. Don't matter which config I change. The mupen64 itself, or the mupen64auto config. Do you have an idea?

@substring perfect. I would give it a shoot

Works perfectly Thanks for your help!
Next Problem, Hyperion. I read that your'r in. Is there an opportunity to help you?

sorry my fold.

https://file.ac/Im14t5ltYso/

sorry my fold.

https://file.ac/Im14t5ltYso/

@substring said in RPI 3 / Recalbox/ Mayflash Adapter / Gamecube Controller:

http://recalbox/help

Ok I do, but first you have to tell my what to do?
So where to I put my information?

I find the usbhid.conf, but can't edit, because Terminal says read-only file system. Can I find it on the SD-Card? And where to find?
And is there anything else to do, apart from this?
And when I edit the usbhid.conf should I #comment everything except for my own usbhid quirks line?

Thanks & Sorry again

@substring thanks for your quick response, but I have add my supportfile under the link above. Or is it not correct the way I've done?

http://www34.zippyshare.com/v/xOFpSbNR/file.html

Hello community,

I have a problem with my RaspberryPi 3 and a Mayflash Gamecube Wii USB Adapter. This one.

It only works as one Controller. So I can use all Controllers, but Recalbox just add new Buttons and detect every Controller as #0 Mayflash Adapter...
I found out, that its maybe a problem of my usbhid.conf

My question is, how to fix this problem? Can I solve it, by just doing this?

#Mayflash Wii Controller Adapter //is this name important?
options usbhid quirks=0x0079:0x1843:0x040

to this file recalbox/fsoverlay/etc/modprobe.d/usbhid.conf via ssh?
is the quirks line correct? I adapt it from her.

And her is the link for my support file.

Thanks for your help and sorry for my poor english.

ok ich hab mal ein wenig weiter gegoogelt. Könnte das hier vielleicht helfen? Bin nicht zu Hause und kann es im Moment nicht testen, bzw. wüsste ich auch nicht, ob ich es so richtig einbinde.

recalbox/fsoverlay/etc/modprobe.d/usbhid.conf

#Mayflash Wii Controller Adapter //ist der Name hier wichtig?
options usbhid quirks=0x0079:0x1843:0x040

Den quirks Eintrag hab ich von einer anderen Seite.

Hab diesen Eintrag genommen und die Werte hier übernommen.
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT }
Ist das zu einfach gedacht, oder kann man das so machen?

Oder kann ich diesen Patch in Recalbox integrieren. Und wenn ja, die große Frage wie.