Recalbox not recognizing 2nd player 03H Dual Arcade 3...

[Andrei]

I found this.

recalbox-buildroot/board/recalbox/fsoverlay/etc/modprobe.d/usbhid.conf

3H Dual Arcade 2Players

options usbhid quirks=0x16c0:0x05e0:0x040

How can i access the usbhid.conf ? so i can add 2 players

[acris]

Hello @Andrei
only it usbhid is the same encoder
and this syntax is only for 4.1

You need to check this information in dmesg log

if you have recalbox 4.0.2
https://forum.recalbox.com/topic/4630/mapped-2p-buttons-don-t-behave-correctly/6

[Andrei]

Hi @acris

Thanks for your reply.

so i delete and added this line :

dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro usbhid.quirks=0x16c0:0x5e1:0x040

still nothing, i see only Player 1 on #0 and nothing like #1

[acris]

I need your recalbox- support.sh.
Check wiki.

[Andrei]

i updated to 4.1, trying like this...

[Andrei]

I have the same problem like this guy.Also my encoder is same.looks that he solve it.Can someone help me solve the problem?

I added usbhid quirks=0x16c0:0x05e0:0x040 , but sill no luck

https://forum.recalbox.com/topic/6148/encodeur-usb-joystick-2-joueurs-3h-equivalent-xim-mo-impossible-2players/2

I get this:

/recalbox/scripts/recalbox-support.sh
lspci: /sys/bus/pci/devices: No such file or directory
/recalbox/scripts/recalbox-support.sh: line 53: aplay: command not found
/recalbox/scripts/recalbox-support.sh: line 54: glxinfo: command not found
/recalbox/share/saves/recalbox-support-20170317152936.tar.gz

https://file.ac/Z7mRFq-rubk/

[acris]

In recalbox 4.1, your encoder works. you didn't need to modify something.
delete usbhid quirks=0x16c0:0x05e0:0x040 added.
you need to mapp your joystick and buttons in emulationstation menu only player 1

[Andrei]

Still not working :S

i installed fresh recalbox with updates to 4.1

https://file.ac/bM5uh6Yd7xk/

I am thinking to connect 2nd player to Pi GPO ...it will work?

[acris]

@Andrei
Post your cmdline.txt too

you need to connect all joystick and buttons on your usb encoder.

[Andrei]

dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro

all mjoysticks buttons are connected, #1 and #2 in mirror.

[Andrei]

sadly i could't fix it so i connected 2nd player to pi gpio.thx for help

[RebeccaRGB]

I fixed this by editing boot.ini and adding usbhid.quirks to this line:

setenv bootargs "${bootrootfs} ${console}"

like so:

setenv bootargs "${bootrootfs} ${console} usbhid.quirks=0x16c0:0x75e1:0x040"

I know this topic is old but I was having this same problem with recalbox 17.12.02 and this was the top Google result for "recalbox 3h dual arcade".

[Substring]

@rebeccargb don't necro such annold topic ... You're using an odroid, not a pi. Boot confg files and syntax are quite different

[Andrei]

Fixed with Recalbox release: 18.03.16

Thank you

[JHaleIT]

Sorry to bring up an older post, but I have the same issue with a different product ID. I found information about it, but it's in Chinese..

I have no clue what it all means.. lol I'm on x86 version of Recalbox..

Up and left on both joysticks refuse to work..

https://www.tipga.com/e/59cfad8a3286fe2a4ac123c8

[JHaleIT]

Any update with this?

[JHaleIT]

More information here: https://retropie.org.uk/forum/topic/7832/fix-up-left-joystick-direction-for-tht-2p-arcade-controller-with-device-id-0x75e1

but it's for Retropie.. I'm using x86/x64 version and ID information: 0x16c0:0x05e0:0x040

[JHaleIT]

There's a patch file I found that fixes the problem, but how do I apply it?

Here is the patch: http://ithink.ch/blog/files/xin-mo/0001-hid-Add-new-driver-for-non-compliant-Xin-Mo-devices.patch