Problem with Mad Catz Xbox 360 wired controller

[acris]

Hello

you need to enable xboxdrv driver and disable psx driver in recalbox.conf
https://github.com/recalbox/recalbox-os/wiki/recalbox.conf-(EN)

## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=0
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=official
 
 
# ------------ D2 - XBOX Controllers ------------ #
## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues 
## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=1
## Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=2

reconfigure gamepad in emulationstation menu.

[WSP77]

Hi! Thx for the answear. I already tried it and doesn't work. When I did it (exactly as the screen above) three controllers apearred in emulation station menu: #0 generic x-box usb pad (or something like that, #1 xbox 360 controller and # 2 xbox 360 controller. My Mad catz is recognized as #0 generic x-box usb pad, not as a xbox 360 controller... I think I need to find a way to configure the "generic x-box usb pad driver", but I don't have any idea on how to do it.

[WSP77]

No one tried to plug a Xbox 360 fight pad before me? I did some search and could not find any clue...

[acris]

Hello @WSP77
do you have 3 gamepad xbox ?

[WSP77]

No, just the Mad Catz. Let me explain: first I turned on recalbox, with no controller or anything conected at all; after I edited the recalbox.conf with NotePad++ (by pc wifi) and restart the recalbox; after restart I pluged the Mad Catz Xbox fight pad and when I get to controller configuration on emulation station there where 3 controllers there (#0, #1 and #3 as I listed berfore), but the only controller connected is the fight pad, recognized as #0 generic x-box usb pad. The pad is not recognized as a xbox 360 controller, because that I get three controllers in list, I presume...

[WSP77]

In time, my problem is the same as it: https://forum.recalbox.com/topic/3865/xbox-360-mad-catz-wwe-all-stars-brawl-pad
No solution there yet...

[WSP77]

No clue at all?

[Substring]

@WSP77 and changing controllers.xboxdrv.nbcontrols=2 to 1 ?

[WSP77]

I'll try that. And I'll post a picture of the emulation station configuration screen and of my config file too. Thx for the answear!

[Substring]

@WSP77 well, i guess it won't help : your pad is configured by the xpad driver, and unknown to xboxdrv ... We could make it work with xboxdrv but it's a little complicated :

• requires you blacklist xpad
• create a dedicated conf file for xboxdrv
• add it to the start process

[WSP77]

Well, I tried and got no success. By disabling PS3 (0) controllers and enabling xboxdrv (1 and 1) I got 2 controllers identified by emulation station: #0 Generic X-box pad and # 1 Xbox Gamepad (US...IVER).
The Ma Catz fight pad is just recognized as #0, and I could not make LT and RT works... I think this is end of the line for me...

[WSP77]

This is a screen of the pad, anyone got one of this model to work on Recalbox?

[Substring]

@WSP77 maybe this will be solved once rockaddicted updates the xpad driver on recalbox 4.1

[WSP77]

I will wait then, to be honest I bought this joypad just to play arcade and Mega Drive games properly on Recallbox. ^^