Solved Can't Connect
-
@mazur Do you have a DNS and a gateway set on your pi ? That's most probably an incomplete DHCP problem
-
@Substring Yes i tryed auto and static settings.. on PC i can't ping recalbox.com too.. maybe some router setting?
-
@mazur as i said : check your DNS and gateway on recalbox, and what happens on your router. If you set a static ip'on recalbox, you may have forgotten what i said
-
Already check everything.. dunno what to do
-
@mazur cdan you paste the result of
ifconfig
? androute
orroute print
? -
@Substring , please check:
# ifconfig eth0 Link encap:Ethernet HWaddr B8:27:EB:79:9E:06 inet addr:192.168.25.4 Bcast:192.168.25.255 Mask:255.255.255.0 inet6 addr: fe80::ba27:ebff:fe79:9e06%1994427092/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:158 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15499 (15.1 KiB) TX bytes:24591 (24.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1%1994427092/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) # # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.25.1 0.0.0.0 UG 0 0 0 eth0 192.168.25.0 * 255.255.255.0 U 0 0 0 eth0 # # /etc/resolv.conf search domain.name # eth0 nameserver 192.168.25.1 # eth0 # /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf # ping recalbox.com PING recalbox.com (217.70.184.38): 56 data bytes --- recalbox.com ping statistics --- 75 packets transmitted, 0 packets received, 100% packet loss
I changed resolv.conf and interfaces but that files keeping returning to the default DHCP settings, already tryed to make them readonly, no sucess..
-
Have you tried pinging google rather ?
-
@Substring Yes, pinging any other site works..
-
@mazur ok can you try a traceroute to recalbox.com, archive.recalbox.com and www.recalbox.com ? Thank you
-
When i use my pc with firefox, i also get a timeout error to connect to recalbox.com sever.
-
recalbox.com itself means nothing, should try with www.recalbox.com. And as your are on the forum, i guess the DNS does work
ooops it does work for me :
# ping recalbox.com PING recalbox.com (217.70.184.38): 56 data bytes 64 bytes from 217.70.184.38: seq=0 ttl=53 time=7.614 ms 64 bytes from 217.70.184.38: seq=1 ttl=53 time=7.370 ms 64 bytes from 217.70.184.38: seq=2 ttl=53 time=7.448 ms 64 bytes from 217.70.184.38: seq=3 ttl=53 time=7.336 ms 64 bytes from 217.70.184.38: seq=4 ttl=53 time=7.521 ms 64 bytes from 217.70.184.38: seq=5 ttl=53 time=7.438 ms 64 bytes from 217.70.184.38: seq=6 ttl=53 time=7.607 ms 64 bytes from 217.70.184.38: seq=7 ttl=53 time=7.504 ms ^C --- recalbox.com ping statistics --- 8 packets transmitted, 8 packets received, 0% packet loss round-trip min/avg/max = 7.336/7.479/7.614 ms
-
try pinging www.recalbox.com instead please
-
Been searching : it pings recalbox.com to say if you're connected or not. I guess we'll change that in 4.1 as this DNS is not accurate and points to nothing special. So the message NOT CONNECTED is a mistake
-
@Substring Thanks very much!
-
Same problem.
Network settings show "not connected".
But connection via SSH is fine.Strange thing is that scraping of ROMs works and tracking with retroachievements server also work as it should. But no updates possible.
Yes, w-lan settings are correct, also looked in the config.
I can ping WWW.recalbox.com but not recalbox.com - same with firefox via laptop.recalbox pings recalbox.com to check if we're "connected".
The "www" has to be in the address.
So how do we update to 4.1 if we get no connection with 4.0?
-
@DannyOcean easy pal ...
4.1 is not here, we are taking care of that dns thing. We'd still have a few tricks up our sleeve anyway. I'd like to say it should be solved by the weekend as we're working on it, but it does not only depend on us
-
@Substring always easy
Also wanted to say a big THANK YOU to you and your colleagues. Coders, forum admins, translators etc... -
blog.recalbox.com also not working.
forum.recalbox.com is fine ... strange
-
the blog is dead for months already
-
Sorry for double post, but I wanted to let you know that there might be an easy solution to fix the "no connection" problem.
If your host (gandi.net ?) supports .htaccess there might be an easy solution.
In ISPconfig the domain has to be "RECALBOX.COM" (without www) and auto-subdomain has to be "www"
The A records in the DNS setting:
IP for www.recalbox.com is 163.172.153.70
IP for recalbox.com is 217.70.184.38That is why the update is not working and the recalbox shows "not connected"
To fix the problem the IP for recalbox.com and www.recalbox.com just have to be the same.
Check the DNS settings and see the A record for yourself.
The hoster (gandi.net ?) should be able to fix it.You also have to add the following code to your root .htaccess file:
This redirects all non-www requests to your site to the www version
RewriteEngine on
RewriteCond %{HTTP_HOST} !^www.
RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L]
The second line means: if the HTTP_HOST does not (!) start with (^) "www.", then put it in memory for the next line. The next line says: from what was captured in the previous line, match everything (.*) from beginning (^) to end ($) and save everything (inside the parenthesis) as $1. Then replace $1 with ""; plus the HTTP_HOST variable.
And this would redirect all www requests to your site to the non-www version
RewriteEngine On
RewriteCond %{HTTP_HOST} !^my-domain.com$ [NC]
RewriteRule ^(.*)$ http://my-domain.com/$1 [R=301,L]
I really hope this helps, and everyone will be able to update
Cheers