recalbox not work well with DPI LCD on 4B

[proplayer2020]

Same issue on pi3... please help
or should I start new topic?

[proplayer2020]

I also think that the rpi doesn't detect the screen and just boot's up when i plug a TV hdmi.

[Scavy]

@proplayer2020 hello
is your recalbox starts when connected to a hdmi tv ?

[Nanaki]

@proplayer2020 Hi, can you please provide information about your screen ? Brand, model, etc

Thank you

[proplayer2020]

sorry for late response, yes my recalbox works on tv screen.

[proplayer2020]

@Nanaki Its an adafruit 3,5" touch screen that connect directly to the rpi via spi bus

[Magaki]

@proplayer2020

Hello, did you follow this link on Recalbox Wiki ?
https://wiki.recalbox.com/en/tutorials/video/tft/tft-lcd-on-spi-bus

[proplayer2020]

@Magaki Yes its the tutorial i followed.I followed the 2,8 inch screen part and I replaced dtoverlay by the same driver but in place of 28 i put 35

[proplayer2020]

Uhh... what is the difference between spi or dpi bus???
Do my screen might work on dpi bus?

[proplayer2020]

Exact reference of my screen :
https://fr.farnell.com/adafruit/2441/pitft-plus-3-5in-touchscreen-for/dp/2816278?cjevent=1ca9473861e611ed817618740a18ba72&cjdata=MXxZfDB8WXww&CMP=AFC-CJ-FR-1765328&gross_price=true&source=CJ
seems to be pi tft PLUS and not pitft xd

[Magaki]

@proplayer2020

This guide was prepared with this product :
https://www.adafruit.com/product/1601

I can't ensure you the guide could work with any DPI LCD, and don't think you can rename 28 to 35 for working it.

If you tried and it's not working, no more clues for help.

[HotCole]

Hi, I have trouble with the setup of Recalbox with the official DPI LCD screen.
The screen runs perfectly well with other OS.
I have modified the config.txt adding the Adafruit screen configuration lines as the manual says.
I tried the fkms method and doesnt work neither.
What can i do to setup it up correctly?
Thanks

[HotCole]

@HotCole said in recalbox not work well with DPI LCD on 4B:

Hi, I have trouble with the setup of Recalbox with the official DPI LCD screen.
The screen runs perfectly well with other OS.
I have modified the config.txt adding the Adafruit screen configuration lines as the manual says.
I tried the fkms method and doesnt work neither.
What can i do to setup it up correctly?
Thanks

Does anyone from the staff know if this will ever work?? Im unable to find more information.