Muppen64plus glide64mk2 - no video on RbPi4 (recalbox 8)

IGA · 14 Dec 2021, 23:18

@davidb2111 На-На))
everything now is clear...

IGA · 13 Feb 2022, 16:13

Hello!
Now (in 8.0.2) problem with video output is solved.
But it's slow! More slower than 3 others emulators\cores that could choose...|

So, how could configurate Muppen64plus glide64mk2 on rbpi4? ( maybe some menu from keyboard, when press esc - exit from emulator, or where some config file located...?)

davidb2111 · 13 Feb 2022, 20:42

Hi @iga

Which rom did you try? Glide64mk2 may not be the good candidate regarding performances

IGA · 13 Feb 2022, 20:50

@davidb2111 Any!
well, let it be 007, the world is not enough, as the first in list....

I'm just want menu with some options which i could set up for emulator ( maybe increase fps, or make them visible) - all very slow then other emulators - why it as default?

davidb2111 · 13 Feb 2022, 22:01

Because it would work well with other roms that other emulators may not run full speed.

IGA · 14 Feb 2022, 00:06

@davidb2111 said in Muppen64plus glide64mk2 - no video on RbPi4 (recalbox :

Because it would work well with other roms that other emulators may not run full speed.

I still don't understand....
in most test of my roms Muppen64plus glide64mk2 was most slower at recalbox

Instead at retropie Mupen64plus glide64 show most speed and performance ( best on retropie)

So, i ask allow some options to configurate it for best performance, cause at default starts it's run slow at recalbox....

IGA · 17 Feb 2022, 20:57

How could configurate this emulator?

davidb2111 · 17 Feb 2022, 22:06

@iga said in Muppen64plus glide64mk2 - no video on RbPi4 (recalbox :

How could configurate this emulator?

Check the config files in SHARE:\system\configs\mupen64\

There is one configuration: mupen64plus.cfg which contain a section [Video-Glide64mk2]. You can take a look there.

davidb2111 · 17 Feb 2022, 22:08

@iga

Also check the resolution of mupen from recalbox.conf, parameter n64.videomode. If not set, it will use global.videomode. You could try to set a lower resolution (1280x720 or so) in n64.videomode.

IGA · 18 Feb 2022, 22:10

@davidb2111 Thank you

IGA · 19 Feb 2022, 00:21

@davidb2111 But the games still looked like hard-hard frameskip ( music\sound plays well)

And i still couldn't enable fps. I open mupen64plus.cfg by notepad and write show_fps = 1. But, after Rbpi booting and launching Muppen64plus glide64mk2, there is still show_fps = 4 in mupen64plus.cfg

How to fix it?

There my mupen64plus.cfg:

 [64DD]
Disk = ""
IPL-ROM = 
 
[Audio-OMX]
BUFFER_SIZE = 4096
DEFAULT_FREQUENCY = 32000
DEFAULT_MODE = 0
LATENCY = 300
NATIVE_MODE = False
OUTPUT_PORT = 1
SWAP_CHANNELS = False
UNDERRUN_MODE = 0
Version = 1
 
[Audio-SDL]
AUDIO_SYNC = False
DEFAULT_FREQUENCY = 33600
PRIMARY_BUFFER_SIZE = 16384
PRIMARY_BUFFER_TARGET = 10240
RESAMPLE = "trivial"
SECONDARY_BUFFER_SIZE = 2048
SWAP_CHANNELS = False
VOLUME_ADJUST = 5
VOLUME_CONTROL_TYPE = 1
VOLUME_DEFAULT = 80
Version = 1
 
[Core]
AutoStateSlotIncrement = False
CountPerOp = 0
CountPerOpDenomPot = 0
CurrentStateSlot = 8
DelaySI = True
DisableExtraMem = False
EnableDeb&ast;&ast;&ast;&ast;r = False
GbCameraVideoCaptureBackend1 = ""
NoCompiledJump = False
OnScreenDisplay = True
R4300Emulator = 2
RandomizeInterrupt = True
SaveDiskFormat = 1
SaveSRAMPath = /recalbox/share/saves/n64
SaveStatePath = /recalbox/share/saves/n64
ScreenshotPath = /recalbox/share/screenshots
SharedDataPath = "/recalbox/share/system/configs/mupen64/"
SiDmaDuration = -1
Version = 1.010000
 
[CoreEvents]
Joy Mapping Decrease Volume = ""
Joy Mapping Fast Forward = "J0B10/H0V2"
Joy Mapping Frame Advance = ""
Joy Mapping Fullscreen = ""
Joy Mapping Gameshark = ""
Joy Mapping Increase Volume = ""
Joy Mapping Increment Slot = "J0B10/H0V1"
Joy Mapping Load State = "J0B10/B3"
Joy Mapping Mute = ""
Joy Mapping Pause = ""
Joy Mapping Reset = "J0B10/B1"
Joy Mapping Save State = "J0B10/B2"
Joy Mapping Screenshot = "J0B10/B4"
Joy Mapping Speed Down = ""
Joy Mapping Speed Up = ""
Joy Mapping Stop = "J0B10/B9"
Kbd Mapping Decrease Volume = 91
Kbd Mapping Fast Forward = 102
Kbd Mapping Frame Advance = 47
Kbd Mapping Fullscreen = 0
Kbd Mapping Gameshark = 103
Kbd Mapping Increase Volume = 93
Kbd Mapping Increment Slot = 0
Kbd Mapping Load State = 288
Kbd Mapping Mute = 109
Kbd Mapping Pause = 112
Kbd Mapping Reset = 290
Kbd Mapping Save State = 286
Kbd Mapping Screenshot = 293
Kbd Mapping Slot 0 = 48
Kbd Mapping Slot 1 = 49
Kbd Mapping Slot 2 = 50
Kbd Mapping Slot 3 = 51
Kbd Mapping Slot 4 = 52
Kbd Mapping Slot 5 = 53
Kbd Mapping Slot 6 = 54
Kbd Mapping Slot 7 = 55
Kbd Mapping Slot 8 = 56
Kbd Mapping Slot 9 = 57
Kbd Mapping Speed Down = 291
Kbd Mapping Speed Up = 292
Kbd Mapping Stop = 27
Version = 1
 
[Input-SDL-Control1]
A Button = "button(0)"
AnalogDeadzone = "4096,4096"
AnalogPeak = "32768,32768"
B Button = "button(2)"
C Button D = "axis(3+)"
C Button L = "axis(2-)"
C Button R = "axis(2+) button(1)"
C Button U = "axis(3-) button(3)"
DPad D = "hat(0 Down)"
DPad L = "hat(0 Left)"
DPad R = "hat(0 Right)"
DPad U = "hat(0 Up)"
L Trig = "button(4)"
Mempak switch = "button(11)"
MouseSensitivity = "2.00,2.00"
R Trig = "button(5)"
Rumblepak switch = "button(12)"
Start = "button(9)"
X Axis = "axis(0-,0+) axis(0+,0-)"
Y Axis = "axis(1-,1+) axis(1+,1-)"
Z Trig = "button(6)"
device = 0
mode = 2
mouse = False
name = "Saitek P3200 Rumble Pad - PC/Xbox 360"
plugged = True
plugin = "2"
version = 2
 
[Input-SDL-Control2]
A Button = ""
AnalogDeadzone = "4096,4096"
AnalogPeak = "32768,32768"
B Button = ""
C Button D = ""
C Button L = ""
C Button R = ""
C Button U = ""
DPad D = ""
DPad L = ""
DPad R = ""
DPad U = ""
L Trig = ""
Mempak switch = ""
MouseSensitivity = "2.00,2.00"
R Trig = ""
Rumblepak switch = ""
Start = ""
X Axis = ""
Y Axis = ""
Z Trig = ""
device = -1
mode = 2
mouse = False
name = ""
plugged = False
plugin = 1
version = 2
 
[Input-SDL-Control3]
A Button = ""
AnalogDeadzone = "4096,4096"
AnalogPeak = "32768,32768"
B Button = ""
C Button D = ""
C Button L = ""
C Button R = ""
C Button U = ""
DPad D = ""
DPad L = ""
DPad R = ""
DPad U = ""
L Trig = ""
Mempak switch = ""
MouseSensitivity = "2.00,2.00"
R Trig = ""
Rumblepak switch = ""
Start = ""
X Axis = ""
Y Axis = ""
Z Trig = ""
device = -1
mode = 2
mouse = False
name = ""
plugged = False
plugin = 1
version = 2
 
[Input-SDL-Control4]
A Button = ""
AnalogDeadzone = "4096,4096"
AnalogPeak = "32768,32768"
B Button = ""
C Button D = ""
C Button L = ""
C Button R = ""
C Button U = ""
DPad D = ""
DPad L = ""
DPad R = ""
DPad U = ""
L Trig = ""
Mempak switch = ""
MouseSensitivity = "2.00,2.00"
R Trig = ""
Rumblepak switch = ""
Start = ""
X Axis = ""
Y Axis = ""
Z Trig = ""
device = -1
mode = 2
mouse = False
name = ""
plugged = False
plugin = 1
version = 2
 
[Rsp-HLE]
AudioListToAudioPlugin = False
DisplayListToGraphicsPlugin = True
RspFallback = ""
Version = 1.000000
 
[Transferpak]
GB-ram-1 = ""
GB-ram-2 = ""
GB-ram-3 = ""
GB-ram-4 = ""
GB-rom-1 = ""
GB-rom-2 = ""
GB-rom-3 = ""
GB-rom-4 = ""
 
[UI-Console]
AudioPlugin = "mupen64plus-audio-sdl.so"
InputPlugin = "mupen64plus-input-sdl.so"
PluginDir = "./"
RspPlugin = "mupen64plus-rsp-hle.so"
Version = 1
VideoPlugin = "/usr/lib/mupen64plus/mupen64plus-video-glide64mk2.so"
 
[Video-GLideN64]
EnableCopyColorToRDRAM = 0
EnableFBEmulation = False
EnableLegacyBlending = True
ShowFPS = True
UseNativeResolutionFactor = 1
bilinearMode = 1
 
[Video-General]
AspectRatio = True
Fullscreen = False
Rotate = 0
ScreenHeight = 480
ScreenWidth = 720
VerticalSync = False
 
[Video-Glide64mk2]
adjust_aspect = -1
alt_tex_size = -1
aspect = -1
buff_clear = -1
card_id = 0
clip_zmax = -1
clip_zmin = -1
clock = False
clock_24_hr = True
correct_viewport = -1
decrease_fillrect_edge = -1
detect_cpu_write = -1
fast_crc = -1
fb_crc_mode = -1
fb_get_info = -1
fb_hires = -1
fb_read_alpha = -1
fb_read_always = -1
fb_render = -1
fb_smart = -1
filtering = -1
fog = -1
force_calc_sphere = -1
force_microcheck = -1
force_polygon_offset = False
force_quad3d = -1
ghq_cache_save = True
ghq_cache_size = 128
ghq_cmpr = 0
ghq_enht = 0
ghq_enht_cmpr = False
ghq_enht_f16bpp = False
ghq_enht_gz = True
ghq_enht_nobg = False
ghq_enht_tile = 0
ghq_fltr = 0
ghq_hirs = 0
ghq_hirs_altcrc = True
ghq_hirs_cmpr = False
ghq_hirs_dump = False
ghq_hirs_f16bpp = False
ghq_hirs_gz = True
ghq_hirs_let_texartists_fly = False
ghq_hirs_tile = False
hires_buf_clear = -1
ignore_aux_copy = -1
increase_texrect_edge = -1
lodmode = -1
n64_z_scale = -1
old_style_adither = -1
optimize_texrect = -1
pal230 = -1
polygon_offset_factor = 0
polygon_offset_units = 0
read_back_to_screen = -1
show_fps = 4
ssformat = False
stipple_mode = -1
stipple_pattern = -1
swapmode = -1
texture_correction = -1
use_sts1_only = -1
useless_is_useless = -1
vsync = True
wrpAnisotropic = True
wrpAntiAliasing = 0
wrpFBO = True
wrpResolution = 0
wrpVRAM = 0
zmode_compare_less = -1
 
[Video-Rice]
AccurateTextureMapping = True
AnisotropicFiltering = 0
CacheSize = 100
ColorQuality = 1
CropMode = 1
DefaultCombinerDisable = False
DoubleSizeForSmallTxtrBuf = False
DumpTexturesToFiles = False
EnableHacks = True
EnableSSE = True
EnableVertexShader = False
FastTextureLoading = False
FogMethod = 1
ForcePolygonOffset = False
ForceTextureFilter = 2
FrameBufferSetting = 0
FrameBufferWriteBackControl = 1
FullTMEMEmulation = False
InN64Resolution = False
LoadHiResCRCOnly = True
LoadHiResTextures = False
Mipmapping = 2
MultiSampling = 0
NormalAlphaBlender = False
OpenGLDepthBufferSetting = 16
OpenGLRenderSetting = 0
OpenGLVertexClipper = False
PolygonOffsetFactor = 0
PolygonOffsetUnits = 0
RenderToTexture = 0
SaveVRAM = False
ScreenUpdateSetting = 7
ShowFPS = True
SkipFrame = False
SkipScreenUpdate = False
SmallTextureOnly = False
TexRectOnly = False
TextureEnhancement = 6
TextureEnhancementControl = 0
TextureQuality = 0
Version = 1
WideScreenHack = False
WinFrameMode = False

And yes, i've use crt. So, i opened n64.videomode and write ;n64.videomode=default

but nothing changed

Muppen64plus glide64mk2 - no video on RbPi4 (recalbox 8)

Want to support us ?

60
Online

98.4k
Users

28.0k
Topics

187.0k
Posts

	[64DD]
	Disk = ""
	IPL-ROM =

	[Audio-OMX]
	BUFFER_SIZE = 4096
	DEFAULT_FREQUENCY = 32000
	DEFAULT_MODE = 0
	LATENCY = 300
	NATIVE_MODE = False
	OUTPUT_PORT = 1
	SWAP_CHANNELS = False
	UNDERRUN_MODE = 0
	Version = 1

	[Audio-SDL]
	AUDIO_SYNC = False
	DEFAULT_FREQUENCY = 33600
	PRIMARY_BUFFER_SIZE = 16384
	PRIMARY_BUFFER_TARGET = 10240
	RESAMPLE = "trivial"
	SECONDARY_BUFFER_SIZE = 2048
	SWAP_CHANNELS = False
	VOLUME_ADJUST = 5
	VOLUME_CONTROL_TYPE = 1
	VOLUME_DEFAULT = 80
	Version = 1

	[Core]
	AutoStateSlotIncrement = False
	CountPerOp = 0
	CountPerOpDenomPot = 0
	CurrentStateSlot = 8
	DelaySI = True
	DisableExtraMem = False
	EnableDeb&ast;&ast;&ast;&ast;r = False
	GbCameraVideoCaptureBackend1 = ""
	NoCompiledJump = False
	OnScreenDisplay = True
	R4300Emulator = 2
	RandomizeInterrupt = True
	SaveDiskFormat = 1
	SaveSRAMPath = /recalbox/share/saves/n64
	SaveStatePath = /recalbox/share/saves/n64
	ScreenshotPath = /recalbox/share/screenshots
	SharedDataPath = "/recalbox/share/system/configs/mupen64/"
	SiDmaDuration = -1
	Version = 1.010000

	[CoreEvents]
	Joy Mapping Decrease Volume = ""
	Joy Mapping Fast Forward = "J0B10/H0V2"
	Joy Mapping Frame Advance = ""
	Joy Mapping Fullscreen = ""
	Joy Mapping Gameshark = ""
	Joy Mapping Increase Volume = ""
	Joy Mapping Increment Slot = "J0B10/H0V1"
	Joy Mapping Load State = "J0B10/B3"
	Joy Mapping Mute = ""
	Joy Mapping Pause = ""
	Joy Mapping Reset = "J0B10/B1"
	Joy Mapping Save State = "J0B10/B2"
	Joy Mapping Screenshot = "J0B10/B4"
	Joy Mapping Speed Down = ""
	Joy Mapping Speed Up = ""
	Joy Mapping Stop = "J0B10/B9"
	Kbd Mapping Decrease Volume = 91
	Kbd Mapping Fast Forward = 102
	Kbd Mapping Frame Advance = 47
	Kbd Mapping Fullscreen = 0
	Kbd Mapping Gameshark = 103
	Kbd Mapping Increase Volume = 93
	Kbd Mapping Increment Slot = 0
	Kbd Mapping Load State = 288
	Kbd Mapping Mute = 109
	Kbd Mapping Pause = 112
	Kbd Mapping Reset = 290
	Kbd Mapping Save State = 286
	Kbd Mapping Screenshot = 293
	Kbd Mapping Slot 0 = 48
	Kbd Mapping Slot 1 = 49
	Kbd Mapping Slot 2 = 50
	Kbd Mapping Slot 3 = 51
	Kbd Mapping Slot 4 = 52
	Kbd Mapping Slot 5 = 53
	Kbd Mapping Slot 6 = 54
	Kbd Mapping Slot 7 = 55
	Kbd Mapping Slot 8 = 56
	Kbd Mapping Slot 9 = 57
	Kbd Mapping Speed Down = 291
	Kbd Mapping Speed Up = 292
	Kbd Mapping Stop = 27
	Version = 1

	[Input-SDL-Control1]
	A Button = "button(0)"
	AnalogDeadzone = "4096,4096"
	AnalogPeak = "32768,32768"
	B Button = "button(2)"
	C Button D = "axis(3+)"
	C Button L = "axis(2-)"
	C Button R = "axis(2+) button(1)"
	C Button U = "axis(3-) button(3)"
	DPad D = "hat(0 Down)"
	DPad L = "hat(0 Left)"
	DPad R = "hat(0 Right)"
	DPad U = "hat(0 Up)"
	L Trig = "button(4)"
	Mempak switch = "button(11)"
	MouseSensitivity = "2.00,2.00"
	R Trig = "button(5)"
	Rumblepak switch = "button(12)"
	Start = "button(9)"
	X Axis = "axis(0-,0+) axis(0+,0-)"
	Y Axis = "axis(1-,1+) axis(1+,1-)"
	Z Trig = "button(6)"
	device = 0
	mode = 2
	mouse = False
	name = "Saitek P3200 Rumble Pad - PC/Xbox 360"
	plugged = True
	plugin = "2"
	version = 2

	[Input-SDL-Control2]
	A Button = ""
	AnalogDeadzone = "4096,4096"
	AnalogPeak = "32768,32768"
	B Button = ""
	C Button D = ""
	C Button L = ""
	C Button R = ""
	C Button U = ""
	DPad D = ""
	DPad L = ""
	DPad R = ""
	DPad U = ""
	L Trig = ""
	Mempak switch = ""
	MouseSensitivity = "2.00,2.00"
	R Trig = ""
	Rumblepak switch = ""
	Start = ""
	X Axis = ""
	Y Axis = ""
	Z Trig = ""
	device = -1
	mode = 2
	mouse = False
	name = ""
	plugged = False
	plugin = 1
	version = 2

	[Input-SDL-Control3]
	A Button = ""
	AnalogDeadzone = "4096,4096"
	AnalogPeak = "32768,32768"
	B Button = ""
	C Button D = ""
	C Button L = ""
	C Button R = ""
	C Button U = ""
	DPad D = ""
	DPad L = ""
	DPad R = ""
	DPad U = ""
	L Trig = ""
	Mempak switch = ""
	MouseSensitivity = "2.00,2.00"
	R Trig = ""
	Rumblepak switch = ""
	Start = ""
	X Axis = ""
	Y Axis = ""
	Z Trig = ""
	device = -1
	mode = 2
	mouse = False
	name = ""
	plugged = False
	plugin = 1
	version = 2

	[Input-SDL-Control4]
	A Button = ""
	AnalogDeadzone = "4096,4096"
	AnalogPeak = "32768,32768"
	B Button = ""
	C Button D = ""
	C Button L = ""
	C Button R = ""
	C Button U = ""
	DPad D = ""
	DPad L = ""
	DPad R = ""
	DPad U = ""
	L Trig = ""
	Mempak switch = ""
	MouseSensitivity = "2.00,2.00"
	R Trig = ""
	Rumblepak switch = ""
	Start = ""
	X Axis = ""
	Y Axis = ""
	Z Trig = ""
	device = -1
	mode = 2
	mouse = False
	name = ""
	plugged = False
	plugin = 1
	version = 2

	[Rsp-HLE]
	AudioListToAudioPlugin = False
	DisplayListToGraphicsPlugin = True
	RspFallback = ""
	Version = 1.000000

	[Transferpak]
	GB-ram-1 = ""
	GB-ram-2 = ""
	GB-ram-3 = ""
	GB-ram-4 = ""
	GB-rom-1 = ""
	GB-rom-2 = ""
	GB-rom-3 = ""
	GB-rom-4 = ""

	[UI-Console]
	AudioPlugin = "mupen64plus-audio-sdl.so"
	InputPlugin = "mupen64plus-input-sdl.so"
	PluginDir = "./"
	RspPlugin = "mupen64plus-rsp-hle.so"
	Version = 1
	VideoPlugin = "/usr/lib/mupen64plus/mupen64plus-video-glide64mk2.so"

	[Video-GLideN64]
	EnableCopyColorToRDRAM = 0
	EnableFBEmulation = False
	EnableLegacyBlending = True
	ShowFPS = True
	UseNativeResolutionFactor = 1
	bilinearMode = 1

	[Video-General]
	AspectRatio = True
	Fullscreen = False
	Rotate = 0
	ScreenHeight = 480
	ScreenWidth = 720
	VerticalSync = False

	[Video-Glide64mk2]
	adjust_aspect = -1
	alt_tex_size = -1
	aspect = -1
	buff_clear = -1
	card_id = 0
	clip_zmax = -1
	clip_zmin = -1
	clock = False
	clock_24_hr = True
	correct_viewport = -1
	decrease_fillrect_edge = -1
	detect_cpu_write = -1
	fast_crc = -1
	fb_crc_mode = -1
	fb_get_info = -1
	fb_hires = -1
	fb_read_alpha = -1
	fb_read_always = -1
	fb_render = -1
	fb_smart = -1
	filtering = -1
	fog = -1
	force_calc_sphere = -1
	force_microcheck = -1
	force_polygon_offset = False
	force_quad3d = -1
	ghq_cache_save = True
	ghq_cache_size = 128
	ghq_cmpr = 0
	ghq_enht = 0
	ghq_enht_cmpr = False
	ghq_enht_f16bpp = False
	ghq_enht_gz = True
	ghq_enht_nobg = False
	ghq_enht_tile = 0
	ghq_fltr = 0
	ghq_hirs = 0
	ghq_hirs_altcrc = True
	ghq_hirs_cmpr = False
	ghq_hirs_dump = False
	ghq_hirs_f16bpp = False
	ghq_hirs_gz = True
	ghq_hirs_let_texartists_fly = False
	ghq_hirs_tile = False
	hires_buf_clear = -1
	ignore_aux_copy = -1
	increase_texrect_edge = -1
	lodmode = -1
	n64_z_scale = -1
	old_style_adither = -1
	optimize_texrect = -1
	pal230 = -1
	polygon_offset_factor = 0
	polygon_offset_units = 0
	read_back_to_screen = -1
	show_fps = 4
	ssformat = False
	stipple_mode = -1
	stipple_pattern = -1
	swapmode = -1
	texture_correction = -1
	use_sts1_only = -1
	useless_is_useless = -1
	vsync = True
	wrpAnisotropic = True
	wrpAntiAliasing = 0
	wrpFBO = True
	wrpResolution = 0
	wrpVRAM = 0
	zmode_compare_less = -1

	[Video-Rice]
	AccurateTextureMapping = True
	AnisotropicFiltering = 0
	CacheSize = 100
	ColorQuality = 1
	CropMode = 1
	DefaultCombinerDisable = False
	DoubleSizeForSmallTxtrBuf = False
	DumpTexturesToFiles = False
	EnableHacks = True
	EnableSSE = True
	EnableVertexShader = False
	FastTextureLoading = False
	FogMethod = 1
	ForcePolygonOffset = False
	ForceTextureFilter = 2
	FrameBufferSetting = 0
	FrameBufferWriteBackControl = 1
	FullTMEMEmulation = False
	InN64Resolution = False
	LoadHiResCRCOnly = True
	LoadHiResTextures = False
	Mipmapping = 2
	MultiSampling = 0
	NormalAlphaBlender = False
	OpenGLDepthBufferSetting = 16
	OpenGLRenderSetting = 0
	OpenGLVertexClipper = False
	PolygonOffsetFactor = 0
	PolygonOffsetUnits = 0
	RenderToTexture = 0
	SaveVRAM = False
	ScreenUpdateSetting = 7
	ShowFPS = True
	SkipFrame = False
	SkipScreenUpdate = False
	SmallTextureOnly = False
	TexRectOnly = False
	TextureEnhancement = 6
	TextureEnhancementControl = 0
	TextureQuality = 0
	Version = 1
	WideScreenHack = False
	WinFrameMode = False

Muppen64plus glide64mk2 - no video on RbPi4 (recalbox 8)

Want to support us ?

60Online

98.4kUsers

28.0kTopics

187.0kPosts

60
Online

98.4k
Users

28.0k
Topics

187.0k
Posts