@valippo you can change es timings in timings.txt, and every other timings in overrides files.
Make some test, and tell me what works for you 
Doesnât the Pi 4 firmware prevent proper 240P support unlike the Pi 3? Things like resolution switching etc. donât work properly?
Bom dia eu estou tendo um problema diferente ,coloco a ROMs na pasta certa via rede ,mas o jogo ao atualizar lista de jogos não aparece no sistema e só na pasta ROMs do emulador correto da pasta Share . alguém pode dara sugestão . obrigado
I wanted to report Wi-Fi on my Intel NUC (NUC7i7BNH) with Intel Wireless-AC 8265 Card still not working properly. After 7.1 Version it won't connect with my FritzBox 7590 Router (No changes made on the Router since 7.1 Version) The only way to connect is with WPS, but after a Restart it doesn't connect anymore, I have to do the WPS Procedure every time.
I would like to report some bugs and suggestions for possible improvements.
*First version 8.0 is not working on HDMI 1080i, only on 1080p, before it worked on reclbox 7.2.2.
*Second I would also like to focus on the Raspiberi's native AV output, as most users buy it to use on older RCA TVs.
And enjoy the nostalgia of old televisions.
Thanks for listening.
Hello! I own a Retrotink Ultimate and I would like to know if it would be compatible with CRT output on Recalbox 8.0 beta. Thanks in advance!
Hi! I would like to report a bug that I noticed in the beta version. On raspberry Pi 4b, using Mupen64plus Rice I noticed performance loss compared to version 7.2.2, goldeneye is slower.
Another thing I've noticed in other versions is that if I change the default installation core in the settings menu, I can't use that core in the individual configuration for games anymore.
Sorry my english is not my native language. Thanks in advance!
@bkg2k hello I tried the Beta 1 version with raspberry Pi 3 a + and when leaving or wanting to launch some games, the console freezes with version 7.2.2 I could not exit the games, with this new one I can exit but in some it does not leave me and in others I can not enter the games I do not have any theme installed it is all original.
Updates in gpi case + rpi zero 2 not works, don't download the update file, fba not works the controls.
Bom dia eu estou tendo um problema diferente ,coloco a ROMs na pasta certa via rede ,mas o jogo ao atualizar lista de jogos não aparece no sistema e só na pasta ROMs do emulador correto da pasta Share . alguém pode dara sugestão . obrigado
You are on the international part of the forum, so speak in english, use google translator or deepl if you cannot speak english.
Your problem doesn't seem to be related to version 8.0 beta, it seems to be just a beginner's doubt, in this case the ideal is to open a new topic, and if you want to speak in Portuguese, use the Portuguese part of the forum:
https://forum.recalbox.com/category/25/portuguĂȘs
Everything indicates that you are using a ROM in a format that the system does not recognize (.rar for example), check the readme.txt file that is inside each folder of each console to know the correct formats and the need for BIOS (If there is a need).
VocĂȘ estĂĄ na parte internacional do fĂłrum, entĂŁo fale em inglĂȘs, use o google tradutor ou o deepl se vocĂȘ nĂŁo souber falar inglĂȘs.
Seu problema nĂŁo parece estar relacionado com a versĂŁo 8.0 beta, parece ser apenas uma dĂșvida de iniciante, neste caso o ideal Ă© abrir um novo tĂłpico, e se quiser falar em portuguĂȘs, use a parte em portuguĂȘs do fĂłrum:
https://forum.recalbox.com/category/25/portuguĂȘs
Tudo indica que vocĂȘ estĂĄ usando uma ROM em um formato que o sistema nĂŁo reconhece (.rar por exemplo), verifique o arquivo readme.txt que estĂĄ dentro de cada pasta de cada console para saber os formatos corretos e as BIOS necessĂĄrias (quando hĂĄ necessidade de BIOS).
RPi Zero 2W: 1. scrapper doesnt work. Even though connected to the network the scrapper finds 0 data.
For all scrap issues, please check with ScreenScraper staff first. This public beta was tested before we made it public and scrap worked fine. They could still have issues following their shutdown for maintenance last week.
is recalbox beta version is good to use?
@pitch64 ok Iâll try again
is recalbox beta version is good to use?
Yes. However, it's not the final version yet, the idea of an open beta is just for users to flag possible bugs, so it's a good version to use, but possibly with some bugs.
My opinion: buy another SD card and test it yourself, there's no better way for you to check if you like it than by testing it, and if it's on another SD card it doesn't affect your current setup at all if you don't like it.
PiBoy DMG with RPi4.
Kodi doesn't work, Asks to enable a lot of plug ins, once past all that it seems fine for the first run, will play videos no problem. Second time to run Kodi, get an isntant message "Playback Failed", and none of the buttons or joypad respond. Turning off the power button results in a "Power Options" window popping up then dissapearing, then popping up then disappearing over and over until I pull the battery.
SCUMMVM - Joypad movement unpredictable, and buttons don't seem to interact with the menus at all
Retroflag GPI Case
No Response from DPAD. Buttons and select and start appear to work fine, just can't navigate
Hi, I bought two generic PS3 joysticks and I can't pair them with the Raspberry Pi3 model B (which has recalbox latest Beta version 8.0). I've tried connecting them using an USB cable for 10 seconds and then holding the PS button with no luck. I can navigate the EmulationStation menu but they don't work inside the games. I've also tried with the bluez, official and shanwan configurations. According to the joystick's lights it's always the 5th controller even though it's the only one connected.
I used Putty to find out which clone they were, this is the result:
[ 7.472441] usb 1-1.3: New USB device found, idVendor=054c, idProduct=0268, b cdDevice= 5.72
[ 7.472460] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber =0
[ 7.472467] usb 1-1.3: Product: PS3 Controller
[ 7.512109] input: PS3 Controller Motion Sensors as /devices/platform/soc/3f9 80000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:054C:0268.0001/input/input3
[ 7.574679] input: PS3 Controller as /devices/platform/soc/3f980000.usb/usb1/ 1-1/1-1.3/1-1.3:1.0/0003:054C:0268.0001/input/input2
[ 7.575355] sony 0003:054C:0268.0001: input,hiddev96,hidraw0: USB HID v81.11 Joystick [PS3 Controller] on usb-3f980000.usb-1.3/input0
Hi! I would like to report a bug that I noticed in the beta version. On raspberry Pi 4b, using Mupen64plus Rice I noticed performance loss compared to version 7.2.2, goldeneye is slower.
Another thing I've noticed in other versions is that if I change the default installation core in the settings menu, I can't use that core in the individual configuration for games anymore.
Sorry my english is not my native language. Thanks in advance!
