Recalbox 7.0 Reloaded (Sortie Jack)

Laban · 3 Oct 2020, 17:03

Toujours identique. dès le reboot on a Default ouput comme valeur, alors qu'il a été changé juste avant.

ian57 · 3 Oct 2020, 17:05

ok, merci des retours ça doit être un bug ES... toute la partie gestion du son a été réécrite pour permettre la détection des cartes sons sur l'ensemble des matériels... mais il ya un effet de bord

Laban · 3 Oct 2020, 17:32

Bon quelques tests :
Reboot : plus de son
lancement de la commande
/etc/init.d/S31emulationstation stop
modification du fichier de configuration
lancement de la commande
/etc/init.d/S31emulationstation start
et voilà le retour

/etc/init.d/S31emulationstation start

[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !
[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !
[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro
[2020/10/03 19:28:55.373] (ERROR) : Can´t watch Path! Path does not exist. Path: gamelist.xml
[2020/10/03 19:28:55.374] (ERROR) : Can´t watch Path! Path does not exist. Path: gamelist.xml
[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack
-bash: syntax error near unexpected token `('

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

-bash: syntax error near unexpected token `('

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

-bash: syntax error near unexpected token `('

[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro

-bash: syntax error near unexpected token (' th: gamelist.xml:28:55.373] (ERROR) : Can´t watch Path! Path does not exist. Pat -bash: syntax error near unexpected token ('
th: gamelist.xml:28:55.374] (ERROR) : Can´t watch Path! Path does not exist. Pat
-bash: syntax error near unexpected token `('

Le paramétre est bien entendu repassé à Default output suite à cela.

Laban · 3 Oct 2020, 18:15

Les logs

[4.58] Wifi option disabled
[        6.17] [        4.58] Wifi option disabled
es
[        6.32] Will not start S13fbcp : system.fbcp.enabled is set to 0
[        6.36] Running MIGRATIONS...
[        6.81] modprobe: module usbhid not found in modules.dep
[        6.98] starting new log
[        6.99] converting dos to unix carriage return characters
[        7.04] setting hostname to RECALBOX
[        7.05] setting audio volume to 90
[        7.07] setting keyboard layout to en
[        7.08] ---- recalbox-config.sh ----
[        7.10] setting audio volume : 90
[        7.08] cannot open file en
[        7.75] setting timezone to Europe/Paris
[        7.06] Simple mixer control 'PCM',0
[        7.06]   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
[        7.06]   Playback channels: Mono
[        7.06]   Limits: Playback -10239 - 400
[        7.06]   Mono: Playback -662 [90%] [-6.62dB] [on]
[        7.77] Setting volume for numid=3
[        7.79] Setting volume for numid=2
[        7.80] Setting volume for numid=1
[        7.81] Setting volume for numid=5
[        7.06] amixer: Control default element write error: Operation not permitted
[        7.06] 
[        7.82] Setting volume for numid=4
[        7.84] Force unmute on HDMI
[        7.06] amixer: Control default element write error: Operation not permitted
[        7.06] 
[        7.86] Force unmute on HDMI
[        7.87] Restoring audio configuration
[        7.88] setting audio to Default output
[        7.90] ---- recalbox-config.sh ----
[        7.93] Unknown audio format : Default
[       15.95] starting xarcade2jstick
[       16.31] xarcade2jstick : no official stick found, looking for keyboard encoder now ...
[       27.08] starting emulationstation with lang = en_US
[       27.15] emulationstation-starter started
[       27.16] started emulationstation (pid=1057)
[       27.19] S32mini TFT : Reading system.secondminitft.enabled => 0
[       27.22] S32miniTFT not enabled
[       27.25] ---- recalbox-config.sh ----
[       28.41] Starting S92switch
[       28.42] script /recalbox/scripts/powerswitch.sh [ STARTED ]
[       28.52] Starting S94manager
[       28.53] ... Starting manager v2
[      264.51] ---- recalbox-config.sh ----
[      264.78] enabled overclock mode : rpi3-turbo
[      272.26] Stopping S94manager
[      272.40] Stopping S92switch
[      272.41] script /recalbox/scripts/powerswitch.sh already stopped !
[      272.44] emulationstation exited code 0
[      272.45] emulationstation-starter ended
[      272.70] S32mini TFT : Reading system.secondminitft.enabled => 0
[      272.72] S32miniTFT not enabled
[      272.83] Stopping Emulationstation
[      273.05] Stopping S13fbcp
[      273.14] recalbox.conf saved to /boot partition

La partie audio est bizarre dans le script de config

 if [ "$command" == "audio" ];then
    # this code is specific to the rpi
    # don't set it on other boards
    # find a more generic way would be nice
    rm /recalbox/share/system/.asoundrc 2>/dev/null
    if [[ "${arch}" =~ "rpi" && "auto hdmi jack" =~ "${mode}" ]]
    then
        # this is specific to the rpi
        cmdVal="0"
        if [ "$mode" == "hdmi" ];then
            cmdVal="2"
        elif [ "$mode" == "jack" ];then
            cmdVal="1"
        fi
        recallog "setting audio output mode : $mode"
        amixer cset numid=3 $cmdVal || exit 1
    elif echo "$mode" | grep -qE "^[[0-9]:[0-9]]"
    then
        cardId=`echo $mode | sed "s+^[\([0-9]\)\:\([0-9]\)].*+\1+g"`
        deviceId=`echo $mode | sed "s+^[\([0-9]\)\:\([0-9]\)].*+\2+g"`
        recallog "setting audio output mode : '$mode' => $cardId $deviceId"
        if [[ "${arch}" == "odroidxu4" && "${cardId}${deviceId}" == "00" ]]
        then
            # this is specific to the xu4
            # bypass the creation of the .asoundrc file for the default 0,0 device as the asound.conf is just enough
            recallog "bypass the creation of .asoundrc file"
            exit 0
        fi
        cat > /recalbox/share/system/.asoundrc << EOF
pcm.!default {
        type hw
        card ${cardId}
        device ${deviceId}
}
 
ctl.!default {
        type hw
        card ${cardId}
}
EOF
        exit $?
    else
        recallog -e "Unknown audio format : $mode"
        exit 1
    fi
    exit 0
fi

Axel Rousset · 3 Oct 2020, 18:08

peut tu me dire quelle modif tu as faite , j'ai le même problème ? merci

Laban · 3 Oct 2020, 18:10

/recalbox/scripts/recalbox-config.sh audio

cela fonctionne bien après
Je regarde pour faire un workaround en lançant la commande avec emulationstation

Axel Rousset · 3 Oct 2020, 18:14

@Laban Merci de ta réponse hyper rapide !
Malheureusement je saisie pas tout a fait .
C'est pas du ssh ?
c'est une commande à faire en local ?
de mon coté j'avais l'habitude de triturer le fichier config.txt , à priori c'est pas la ?
si tu peux m'aiguiller un chouilla plus je m'en sortirai Merci !

acris · 3 Oct 2020, 18:14

@Laban said in Recalbox 7.0 Reloaded (Sortie Jack):

/recalbox/scripts/recalbox-config.sh audio

cela fonctionne bien après
Je regarde pour faire un workaround en lançant la commande avec emulationstation

tu as modifié quoi ?

Axel Rousset · 3 Oct 2020, 18:22

@acris dans config.txt sans succes ..

hdmi_safe=1
hdmi_force_edid_audio=1
hdmi_drive=2

sinon , si mon raisonement est bon, j'ai compris qu'il fallait lancer un script mais je vois pas comment ..
pouvez vous me donnez la manip pour avoir la main sur l'os éventuellement ?

acris · 3 Oct 2020, 18:23

ya pas de solution pour la sortie jack pour le moment, la team dev travaille sur le problème
merci de patienter , la team est en déplacement à Paris.

Laban · 3 Oct 2020, 18:40

Je suis en train de tester, mais mon workaround semble fonctionner en attendant un correctif des dev. Dès que j'ai fini mes tests, je vous donne la procédure

nono7 · 3 Oct 2020, 19:06

On va donc attendre que la team règle le problème alors, merci

Laban · 3 Oct 2020, 19:53

Perso cela fonctionne, j'ai cependant du modifier le lanceur d'emulation station
Voici ce que j'ai fait :
J'ai me suis connecté en sftp sur recalbox (logiciel winscp / login root / mdp recalboxroot)
Je me suis posé dans le répertoire /etc/init.d et j'ai copié sur mon PC le fichier S32emulationstation que j'ai modifié comme cela

 #!/bin/sh
#
#
 
systemsetting="recalbox_settings"
 
PIDFILE=/var/run/emulationstation.pid
ESBIN=/usr/bin/emulationstation-starter
 
scr_msg() {
	printf "\r%20s%10s" "${1}" " " > /dev/tty0 # with spaces at the begining for screen not displaying the left ; and spaces on right to erase old msg
}
 
case "$1" in
  start)
	enabled="`$systemsetting -command load -key system.es.atstartup`"
	videoMode="`$systemsetting -command load -key system.es.videomode`"
	if [ "$enabled" != "0" ];then
		# get output video size
		fbdevHeight=$(cut -d, -f2 /sys/class/graphics/fb0/virtual_size)
		# In case the logo has been removed, let's put it back again
		if [ "${fbdevHeight}" -le 320 ] ; then
			fbv2 -f -i /recalbox/system/resources/splash/240p/logo-version.png
		else
			fbv2 -f -i /recalbox/system/resources/splash/logo-version.png
		fi
 
		echo $videoMode | grep -qE "(CEA|DMT) [0-9]{1,2} (HDMI|DVI)"
		[ $? = "0" ] && tvservice -e "$videoMode"
		settings_lang="`$systemsetting -command load -key system.language`"
		recallog "starting emulationstation with lang = $settings_lang"
		if grep -q rpi4 /recalbox/recalbox.arch; then
			HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libEGL.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid  --exec "$ESBIN" &
		else
			HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libGLESv2.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid  --exec "$ESBIN" &
		fi
	fi
	/recalbox/scripts/recalbox-config.sh audio
	;;
  stop)
	recallog "Stopping Emulationstation"
	start-stop-daemon -K -q -p "${PIDFILE}"
	clear > /dev/tty0
	(echo;echo;echo;echo;echo) > /dev/tty0
	scr_msg "Please DO NOT power off Recalbox, PLEASE WAIT !!!"
	;;
  restart|reload)
	"$0" stop
	if [ -f "${PIDFILE}" ] ; then
		ESPID=`cat /var/run/emulationstation.pid 2>/dev/null`
		while `"$0" status > /dev/null` ; do
			sleep 0.1
		done
	fi
	"$0" start
	;;
  status)
	ESPID=`cat ${PIDFILE} 2>/dev/null`
	if [ -f "${PIDFILE}" ] && `ps | grep -qE "^[[:space:]]*${ESPID}"` ; then
		echo "Emulationstation is running (pid `cat /var/run/emulationstation.pid`)"
		exit 0
	else
		echo "Emulationstation is stopped"
		exit 1
	fi
	;;
  *)
	echo "Usage: $0 {start|stop|restart}"
	exit 1
esac
 
exit $?

J'ai ensuite mis ce fichier dans le réperttoire /recalbox/share/system

Je me suis ensuite connect à recalbox avec putty avec le meme compte que winscp

la partition étant protégé en écriture, il faut lancer la commande

mount -o remount,rw /

ensuite on lance la copie

cp -f /recalbox/share/system/S31emulationstation /etc/init.d/

et on remet les droits

chmod 755 /etc/init.d/S31emulationstation

Hop pour ma part cela a parfaitement fonctionner.

Laban · 3 Oct 2020, 19:48

Erreur dans le précédent message, que je ne peux bizarrement plus éditer
Le fichier est S31emulationstation
Cela donne donc :

 mount -o remount,rw /
cp -f /recalbox/share/system/S31emulationstation /etc/init.d/
chmod 755 /etc/init.d/S31emulationstation

acris · 3 Oct 2020, 19:47

@Laban
j ai corrigé ton sujet pour S32emulationstation.

Laban · 3 Oct 2020, 19:49

@acris said in Recalbox 7.0 Reloaded (Sortie Jack):

@Laban
j ai corrigé ton sujet pour S32emulationstation.

Le fichier est S31emulationstation

gm03 · 3 Oct 2020, 20:00

J'ai fait la modif, toujours pas de son pour moi ....

Laban · 3 Oct 2020, 20:06

@gm03 said in Recalbox 7.0 Reloaded (Sortie Jack):

J'ai fait la modif, toujours pas de son pour moi ....

Essaie de lancer la commande

/recalbox/scripts/recalbox-config.sh audio

pour voir en te connectant et donne le résultat. Indiques aussi la plateforme. Je suis sur un raspberry pi 3b+

gm03 · 3 Oct 2020, 20:18

@Laban said in Recalbox 7.0 Reloaded (Sortie Jack):

/recalbox/scripts/recalbox-config.sh audio

numid=3,iface=MIXER,name='PCM Playback Route'
; type=INTEGER,access=rw------,values=1,min=0,max=2,step=0
: values=0

PI2 pour moi ...

Laban · 3 Oct 2020, 20:22

@gm03

Est ce que cela relance le son ou toujours pas en lançant cette commande ?

Recalbox 7.0 Reloaded (Sortie Jack)

/etc/init.d/S31emulationstation start

[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro

Want to support us ?

114
Online

98.0k
Users

28.0k
Topics

186.9k
Posts

	if [ "$command" == "audio" ];then
	# this code is specific to the rpi
	# don't set it on other boards
	# find a more generic way would be nice
	rm /recalbox/share/system/.asoundrc 2>/dev/null
	if [[ "${arch}" =~ "rpi" && "auto hdmi jack" =~ "${mode}" ]]
	then
	# this is specific to the rpi
	cmdVal="0"
	if [ "$mode" == "hdmi" ];then
	cmdVal="2"
	elif [ "$mode" == "jack" ];then
	cmdVal="1"
	fi
	recallog "setting audio output mode : $mode"
	amixer cset numid=3 $cmdVal \|\| exit 1
	elif echo "$mode" \| grep -qE "^[[0-9]:[0-9]]"
	then
	cardId=`echo $mode \| sed "s+^[\([0-9]\)\:\([0-9]\)].*+\1+g"`
	deviceId=`echo $mode \| sed "s+^[\([0-9]\)\:\([0-9]\)].*+\2+g"`
	recallog "setting audio output mode : '$mode' => $cardId $deviceId"
	if [[ "${arch}" == "odroidxu4" && "${cardId}${deviceId}" == "00" ]]
	then
	# this is specific to the xu4
	# bypass the creation of the .asoundrc file for the default 0,0 device as the asound.conf is just enough
	recallog "bypass the creation of .asoundrc file"
	exit 0
	fi
	cat > /recalbox/share/system/.asoundrc << EOF
	pcm.!default {
	type hw
	card ${cardId}
	device ${deviceId}
	}

	ctl.!default {
	type hw
	card ${cardId}
	}
	EOF
	exit $?
	else
	recallog -e "Unknown audio format : $mode"
	exit 1
	fi
	exit 0
	fi

	#!/bin/sh
	#
	#

	systemsetting="recalbox_settings"

	PIDFILE=/var/run/emulationstation.pid
	ESBIN=/usr/bin/emulationstation-starter

	scr_msg() {
	printf "\r%20s%10s" "${1}" " " > /dev/tty0 # with spaces at the begining for screen not displaying the left ; and spaces on right to erase old msg
	}

	case "$1" in
	start)
	enabled="`$systemsetting -command load -key system.es.atstartup`"
	videoMode="`$systemsetting -command load -key system.es.videomode`"
	if [ "$enabled" != "0" ];then
	# get output video size
	fbdevHeight=$(cut -d, -f2 /sys/class/graphics/fb0/virtual_size)
	# In case the logo has been removed, let's put it back again
	if [ "${fbdevHeight}" -le 320 ] ; then
	fbv2 -f -i /recalbox/system/resources/splash/240p/logo-version.png
	else
	fbv2 -f -i /recalbox/system/resources/splash/logo-version.png
	fi

	echo $videoMode \| grep -qE "(CEA\|DMT) [0-9]{1,2} (HDMI\|DVI)"
	[ $? = "0" ] && tvservice -e "$videoMode"
	settings_lang="`$systemsetting -command load -key system.language`"
	recallog "starting emulationstation with lang = $settings_lang"
	if grep -q rpi4 /recalbox/recalbox.arch; then
	HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libEGL.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid --exec "$ESBIN" &
	else
	HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libGLESv2.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid --exec "$ESBIN" &
	fi
	fi
	/recalbox/scripts/recalbox-config.sh audio
	;;
	stop)
	recallog "Stopping Emulationstation"
	start-stop-daemon -K -q -p "${PIDFILE}"
	clear > /dev/tty0
	(echo;echo;echo;echo;echo) > /dev/tty0
	scr_msg "Please DO NOT power off Recalbox, PLEASE WAIT !!!"
	;;
	restart\|reload)
	"$0" stop
	if [ -f "${PIDFILE}" ] ; then
	ESPID=`cat /var/run/emulationstation.pid 2>/dev/null`
	while `"$0" status > /dev/null` ; do
	sleep 0.1
	done
	fi
	"$0" start
	;;
	status)
	ESPID=`cat ${PIDFILE} 2>/dev/null`
	if [ -f "${PIDFILE}" ] && `ps \| grep -qE "^[[:space:]]*${ESPID}"` ; then
	echo "Emulationstation is running (pid `cat /var/run/emulationstation.pid`)"
	exit 0
	else
	echo "Emulationstation is stopped"
	exit 1
	fi
	;;
	*)
	echo "Usage: $0 {start\|stop\|restart}"
	exit 1
	esac

	exit $?

	mount -o remount,rw /
	cp -f /recalbox/share/system/S31emulationstation /etc/init.d/
	chmod 755 /etc/init.d/S31emulationstation

Recalbox 7.0 Reloaded (Sortie Jack)

/etc/init.d/S31emulationstation start

[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro

Want to support us ?

114Online

98.0kUsers

28.0kTopics

186.9kPosts

114
Online

98.0k
Users

28.0k
Topics

186.9k
Posts