Recalbox 7.0 Reloaded (Sortie Jack)

gm03 · 3 Oct 2020, 16:25

@ian57 said in Recalbox 7.0 Reloaded (Sortie Jack):

Apres le premier Reboot c'est Ok, un reboot après ca ne marche plus ....

Ca m'a aussi fait pareil en changeant l'écran en DMT 47 HDMI ... bizarrement en le rentrant 3-4 fois il a l'air de rester ... mais pas l'audio !

En fait il y a Headphones dans la liste de ES pas jack ... cela ne vient pas de ca ?

maxxam · 3 Oct 2020, 16:23

Bonjour

idem pour moi sur raspberry 3B

Valfadir · 3 Oct 2020, 16:44

Si ça peut aider...
Quand je met jack dans l'interface web de recalbox et que je sauvegarde
Avant

Après
Jack est écrasé en defaut output
audio.device=Default output

Reboot
Le son fonctionne
audio.device=Default output

Reboot
Plus de son et le recalbox.conf est toujours le même
audio.device=Default output

Laban · 3 Oct 2020, 17:03

Toujours identique. dès le reboot on a Default ouput comme valeur, alors qu'il a été changé juste avant.

ian57 · 3 Oct 2020, 17:05

ok, merci des retours ça doit être un bug ES... toute la partie gestion du son a été réécrite pour permettre la détection des cartes sons sur l'ensemble des matériels... mais il ya un effet de bord

Laban · 3 Oct 2020, 17:32

Bon quelques tests :
Reboot : plus de son
lancement de la commande
/etc/init.d/S31emulationstation stop
modification du fichier de configuration
lancement de la commande
/etc/init.d/S31emulationstation start
et voilà le retour

/etc/init.d/S31emulationstation start

[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !
[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !
[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro
[2020/10/03 19:28:55.373] (ERROR) : Can´t watch Path! Path does not exist. Path: gamelist.xml
[2020/10/03 19:28:55.374] (ERROR) : Can´t watch Path! Path does not exist. Path: gamelist.xml
[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack
-bash: syntax error near unexpected token `('

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

-bash: syntax error near unexpected token `('

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

-bash: syntax error near unexpected token `('

[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro

-bash: syntax error near unexpected token (' th: gamelist.xml:28:55.373] (ERROR) : Can´t watch Path! Path does not exist. Pat -bash: syntax error near unexpected token ('
th: gamelist.xml:28:55.374] (ERROR) : Can´t watch Path! Path does not exist. Pat
-bash: syntax error near unexpected token `('

Le paramétre est bien entendu repassé à Default output suite à cela.

Laban · 3 Oct 2020, 18:15

Les logs

[4.58] Wifi option disabled
[        6.17] [        4.58] Wifi option disabled
es
[        6.32] Will not start S13fbcp : system.fbcp.enabled is set to 0
[        6.36] Running MIGRATIONS...
[        6.81] modprobe: module usbhid not found in modules.dep
[        6.98] starting new log
[        6.99] converting dos to unix carriage return characters
[        7.04] setting hostname to RECALBOX
[        7.05] setting audio volume to 90
[        7.07] setting keyboard layout to en
[        7.08] ---- recalbox-config.sh ----
[        7.10] setting audio volume : 90
[        7.08] cannot open file en
[        7.75] setting timezone to Europe/Paris
[        7.06] Simple mixer control 'PCM',0
[        7.06]   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
[        7.06]   Playback channels: Mono
[        7.06]   Limits: Playback -10239 - 400
[        7.06]   Mono: Playback -662 [90%] [-6.62dB] [on]
[        7.77] Setting volume for numid=3
[        7.79] Setting volume for numid=2
[        7.80] Setting volume for numid=1
[        7.81] Setting volume for numid=5
[        7.06] amixer: Control default element write error: Operation not permitted
[        7.06] 
[        7.82] Setting volume for numid=4
[        7.84] Force unmute on HDMI
[        7.06] amixer: Control default element write error: Operation not permitted
[        7.06] 
[        7.86] Force unmute on HDMI
[        7.87] Restoring audio configuration
[        7.88] setting audio to Default output
[        7.90] ---- recalbox-config.sh ----
[        7.93] Unknown audio format : Default
[       15.95] starting xarcade2jstick
[       16.31] xarcade2jstick : no official stick found, looking for keyboard encoder now ...
[       27.08] starting emulationstation with lang = en_US
[       27.15] emulationstation-starter started
[       27.16] started emulationstation (pid=1057)
[       27.19] S32mini TFT : Reading system.secondminitft.enabled => 0
[       27.22] S32miniTFT not enabled
[       27.25] ---- recalbox-config.sh ----
[       28.41] Starting S92switch
[       28.42] script /recalbox/scripts/powerswitch.sh [ STARTED ]
[       28.52] Starting S94manager
[       28.53] ... Starting manager v2
[      264.51] ---- recalbox-config.sh ----
[      264.78] enabled overclock mode : rpi3-turbo
[      272.26] Stopping S94manager
[      272.40] Stopping S92switch
[      272.41] script /recalbox/scripts/powerswitch.sh already stopped !
[      272.44] emulationstation exited code 0
[      272.45] emulationstation-starter ended
[      272.70] S32mini TFT : Reading system.secondminitft.enabled => 0
[      272.72] S32miniTFT not enabled
[      272.83] Stopping Emulationstation
[      273.05] Stopping S13fbcp
[      273.14] recalbox.conf saved to /boot partition

La partie audio est bizarre dans le script de config

 if [ "$command" == "audio" ];then
    # this code is specific to the rpi
    # don't set it on other boards
    # find a more generic way would be nice
    rm /recalbox/share/system/.asoundrc 2>/dev/null
    if [[ "${arch}" =~ "rpi" && "auto hdmi jack" =~ "${mode}" ]]
    then
        # this is specific to the rpi
        cmdVal="0"
        if [ "$mode" == "hdmi" ];then
            cmdVal="2"
        elif [ "$mode" == "jack" ];then
            cmdVal="1"
        fi
        recallog "setting audio output mode : $mode"
        amixer cset numid=3 $cmdVal || exit 1
    elif echo "$mode" | grep -qE "^[[0-9]:[0-9]]"
    then
        cardId=`echo $mode | sed "s+^[\([0-9]\)\:\([0-9]\)].*+\1+g"`
        deviceId=`echo $mode | sed "s+^[\([0-9]\)\:\([0-9]\)].*+\2+g"`
        recallog "setting audio output mode : '$mode' => $cardId $deviceId"
        if [[ "${arch}" == "odroidxu4" && "${cardId}${deviceId}" == "00" ]]
        then
            # this is specific to the xu4
            # bypass the creation of the .asoundrc file for the default 0,0 device as the asound.conf is just enough
            recallog "bypass the creation of .asoundrc file"
            exit 0
        fi
        cat > /recalbox/share/system/.asoundrc << EOF
pcm.!default {
        type hw
        card ${cardId}
        device ${deviceId}
}
 
ctl.!default {
        type hw
        card ${cardId}
}
EOF
        exit $?
    else
        recallog -e "Unknown audio format : $mode"
        exit 1
    fi
    exit 0
fi

Axel Rousset · 3 Oct 2020, 18:08

peut tu me dire quelle modif tu as faite , j'ai le même problème ? merci

Laban · 3 Oct 2020, 18:10

/recalbox/scripts/recalbox-config.sh audio

cela fonctionne bien après
Je regarde pour faire un workaround en lançant la commande avec emulationstation

Axel Rousset · 3 Oct 2020, 18:14

@Laban Merci de ta réponse hyper rapide !
Malheureusement je saisie pas tout a fait .
C'est pas du ssh ?
c'est une commande à faire en local ?
de mon coté j'avais l'habitude de triturer le fichier config.txt , à priori c'est pas la ?
si tu peux m'aiguiller un chouilla plus je m'en sortirai Merci !

acris · 3 Oct 2020, 18:14

@Laban said in Recalbox 7.0 Reloaded (Sortie Jack):

/recalbox/scripts/recalbox-config.sh audio

cela fonctionne bien après
Je regarde pour faire un workaround en lançant la commande avec emulationstation

tu as modifié quoi ?

Axel Rousset · 3 Oct 2020, 18:22

@acris dans config.txt sans succes ..

hdmi_safe=1
hdmi_force_edid_audio=1
hdmi_drive=2

sinon , si mon raisonement est bon, j'ai compris qu'il fallait lancer un script mais je vois pas comment ..
pouvez vous me donnez la manip pour avoir la main sur l'os éventuellement ?

acris · 3 Oct 2020, 18:23

ya pas de solution pour la sortie jack pour le moment, la team dev travaille sur le problème
merci de patienter , la team est en déplacement à Paris.

Laban · 3 Oct 2020, 18:40

Je suis en train de tester, mais mon workaround semble fonctionner en attendant un correctif des dev. Dès que j'ai fini mes tests, je vous donne la procédure

nono7 · 3 Oct 2020, 19:06

On va donc attendre que la team règle le problème alors, merci

Laban · 3 Oct 2020, 19:53

Perso cela fonctionne, j'ai cependant du modifier le lanceur d'emulation station
Voici ce que j'ai fait :
J'ai me suis connecté en sftp sur recalbox (logiciel winscp / login root / mdp recalboxroot)
Je me suis posé dans le répertoire /etc/init.d et j'ai copié sur mon PC le fichier S32emulationstation que j'ai modifié comme cela

 #!/bin/sh
#
#
 
systemsetting="recalbox_settings"
 
PIDFILE=/var/run/emulationstation.pid
ESBIN=/usr/bin/emulationstation-starter
 
scr_msg() {
	printf "\r%20s%10s" "${1}" " " > /dev/tty0 # with spaces at the begining for screen not displaying the left ; and spaces on right to erase old msg
}
 
case "$1" in
  start)
	enabled="`$systemsetting -command load -key system.es.atstartup`"
	videoMode="`$systemsetting -command load -key system.es.videomode`"
	if [ "$enabled" != "0" ];then
		# get output video size
		fbdevHeight=$(cut -d, -f2 /sys/class/graphics/fb0/virtual_size)
		# In case the logo has been removed, let's put it back again
		if [ "${fbdevHeight}" -le 320 ] ; then
			fbv2 -f -i /recalbox/system/resources/splash/240p/logo-version.png
		else
			fbv2 -f -i /recalbox/system/resources/splash/logo-version.png
		fi
 
		echo $videoMode | grep -qE "(CEA|DMT) [0-9]{1,2} (HDMI|DVI)"
		[ $? = "0" ] && tvservice -e "$videoMode"
		settings_lang="`$systemsetting -command load -key system.language`"
		recallog "starting emulationstation with lang = $settings_lang"
		if grep -q rpi4 /recalbox/recalbox.arch; then
			HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libEGL.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid  --exec "$ESBIN" &
		else
			HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libGLESv2.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid  --exec "$ESBIN" &
		fi
	fi
	/recalbox/scripts/recalbox-config.sh audio
	;;
  stop)
	recallog "Stopping Emulationstation"
	start-stop-daemon -K -q -p "${PIDFILE}"
	clear > /dev/tty0
	(echo;echo;echo;echo;echo) > /dev/tty0
	scr_msg "Please DO NOT power off Recalbox, PLEASE WAIT !!!"
	;;
  restart|reload)
	"$0" stop
	if [ -f "${PIDFILE}" ] ; then
		ESPID=`cat /var/run/emulationstation.pid 2>/dev/null`
		while `"$0" status > /dev/null` ; do
			sleep 0.1
		done
	fi
	"$0" start
	;;
  status)
	ESPID=`cat ${PIDFILE} 2>/dev/null`
	if [ -f "${PIDFILE}" ] && `ps | grep -qE "^[[:space:]]*${ESPID}"` ; then
		echo "Emulationstation is running (pid `cat /var/run/emulationstation.pid`)"
		exit 0
	else
		echo "Emulationstation is stopped"
		exit 1
	fi
	;;
  *)
	echo "Usage: $0 {start|stop|restart}"
	exit 1
esac
 
exit $?

J'ai ensuite mis ce fichier dans le réperttoire /recalbox/share/system

Je me suis ensuite connect à recalbox avec putty avec le meme compte que winscp

la partition étant protégé en écriture, il faut lancer la commande

mount -o remount,rw /

ensuite on lance la copie

cp -f /recalbox/share/system/S31emulationstation /etc/init.d/

et on remet les droits

chmod 755 /etc/init.d/S31emulationstation

Hop pour ma part cela a parfaitement fonctionner.

Laban · 3 Oct 2020, 19:48

Erreur dans le précédent message, que je ne peux bizarrement plus éditer
Le fichier est S31emulationstation
Cela donne donc :

 mount -o remount,rw /
cp -f /recalbox/share/system/S31emulationstation /etc/init.d/
chmod 755 /etc/init.d/S31emulationstation

acris · 3 Oct 2020, 19:47

@Laban
j ai corrigé ton sujet pour S32emulationstation.

Laban · 3 Oct 2020, 19:49

@acris said in Recalbox 7.0 Reloaded (Sortie Jack):

@Laban
j ai corrigé ton sujet pour S32emulationstation.

Le fichier est S31emulationstation

gm03 · 3 Oct 2020, 20:00

J'ai fait la modif, toujours pas de son pour moi ....

Recalbox 7.0 Reloaded (Sortie Jack)

/etc/init.d/S31emulationstation start

[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro

Want to support us ?

138
Online

97.8k
Users

28.0k
Topics

186.8k
Posts

	if [ "$command" == "audio" ];then
	# this code is specific to the rpi
	# don't set it on other boards
	# find a more generic way would be nice
	rm /recalbox/share/system/.asoundrc 2>/dev/null
	if [[ "${arch}" =~ "rpi" && "auto hdmi jack" =~ "${mode}" ]]
	then
	# this is specific to the rpi
	cmdVal="0"
	if [ "$mode" == "hdmi" ];then
	cmdVal="2"
	elif [ "$mode" == "jack" ];then
	cmdVal="1"
	fi
	recallog "setting audio output mode : $mode"
	amixer cset numid=3 $cmdVal \|\| exit 1
	elif echo "$mode" \| grep -qE "^[[0-9]:[0-9]]"
	then
	cardId=`echo $mode \| sed "s+^[\([0-9]\)\:\([0-9]\)].*+\1+g"`
	deviceId=`echo $mode \| sed "s+^[\([0-9]\)\:\([0-9]\)].*+\2+g"`
	recallog "setting audio output mode : '$mode' => $cardId $deviceId"
	if [[ "${arch}" == "odroidxu4" && "${cardId}${deviceId}" == "00" ]]
	then
	# this is specific to the xu4
	# bypass the creation of the .asoundrc file for the default 0,0 device as the asound.conf is just enough
	recallog "bypass the creation of .asoundrc file"
	exit 0
	fi
	cat > /recalbox/share/system/.asoundrc << EOF
	pcm.!default {
	type hw
	card ${cardId}
	device ${deviceId}
	}

	ctl.!default {
	type hw
	card ${cardId}
	}
	EOF
	exit $?
	else
	recallog -e "Unknown audio format : $mode"
	exit 1
	fi
	exit 0
	fi

	#!/bin/sh
	#
	#

	systemsetting="recalbox_settings"

	PIDFILE=/var/run/emulationstation.pid
	ESBIN=/usr/bin/emulationstation-starter

	scr_msg() {
	printf "\r%20s%10s" "${1}" " " > /dev/tty0 # with spaces at the begining for screen not displaying the left ; and spaces on right to erase old msg
	}

	case "$1" in
	start)
	enabled="`$systemsetting -command load -key system.es.atstartup`"
	videoMode="`$systemsetting -command load -key system.es.videomode`"
	if [ "$enabled" != "0" ];then
	# get output video size
	fbdevHeight=$(cut -d, -f2 /sys/class/graphics/fb0/virtual_size)
	# In case the logo has been removed, let's put it back again
	if [ "${fbdevHeight}" -le 320 ] ; then
	fbv2 -f -i /recalbox/system/resources/splash/240p/logo-version.png
	else
	fbv2 -f -i /recalbox/system/resources/splash/logo-version.png
	fi

	echo $videoMode \| grep -qE "(CEA\|DMT) [0-9]{1,2} (HDMI\|DVI)"
	[ $? = "0" ] && tvservice -e "$videoMode"
	settings_lang="`$systemsetting -command load -key system.language`"
	recallog "starting emulationstation with lang = $settings_lang"
	if grep -q rpi4 /recalbox/recalbox.arch; then
	HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libEGL.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid --exec "$ESBIN" &
	else
	HOME=/recalbox/share/system LANG="${settings_lang}.UTF-8" SDL_VIDEO_GL_DRIVER=/usr/lib/libGLESv2.so SDL_VIDEO_EGL_DRIVER=/usr/lib/libGLESv2.so SDL_NOMOUSE=1 start-stop-daemon -S -q -m -p /var/run/emulationstation.pid --exec "$ESBIN" &
	fi
	fi
	/recalbox/scripts/recalbox-config.sh audio
	;;
	stop)
	recallog "Stopping Emulationstation"
	start-stop-daemon -K -q -p "${PIDFILE}"
	clear > /dev/tty0
	(echo;echo;echo;echo;echo) > /dev/tty0
	scr_msg "Please DO NOT power off Recalbox, PLEASE WAIT !!!"
	;;
	restart\|reload)
	"$0" stop
	if [ -f "${PIDFILE}" ] ; then
	ESPID=`cat /var/run/emulationstation.pid 2>/dev/null`
	while `"$0" status > /dev/null` ; do
	sleep 0.1
	done
	fi
	"$0" start
	;;
	status)
	ESPID=`cat ${PIDFILE} 2>/dev/null`
	if [ -f "${PIDFILE}" ] && `ps \| grep -qE "^[[:space:]]*${ESPID}"` ; then
	echo "Emulationstation is running (pid `cat /var/run/emulationstation.pid`)"
	exit 0
	else
	echo "Emulationstation is stopped"
	exit 1
	fi
	;;
	*)
	echo "Usage: $0 {start\|stop\|restart}"
	exit 1
	esac

	exit $?

	mount -o remount,rw /
	cp -f /recalbox/share/system/S31emulationstation /etc/init.d/
	chmod 755 /etc/init.d/S31emulationstation

Recalbox 7.0 Reloaded (Sortie Jack)

/etc/init.d/S31emulationstation start

[2020/10/03 19:28:50.346] (ERROR) : Cannot find audio device jack

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:50.390] (ERROR) : [MQTT] Sending messageConnexion to tcp://127.0.0.1:1883 from recalbox-emulationstation failed (send) !

[2020/10/03 19:28:52.162] (ERROR) : Core vice_xcbm5x0 cannot be added to emulator libretro

Want to support us ?

138Online

97.8kUsers

28.0kTopics

186.8kPosts

138
Online

97.8k
Users

28.0k
Topics

186.8k
Posts