V3.3.0 beta testers needed – besoin de beta testeurs
-
En effet, bien que la méthode de déclaration des jeux soit simple, il est parfois souhaitable d’avoir accès à l’interface complète de scummvm qui permet, entre autre, de modifier les paramètres audio et video. Avec certain jeu il est souhaitable de pouvoir activer l’option de lecture rapide des videos et de pouvoir choisir le module midi. Sans accès à l’interface de scummvm ce n’est malheureusement pas possible. Pouvez-vous inclure, s’il vous plait cette option quitte à ce qu’elle apparaisse comme un jeu listé dans l’interface de RecalBox (un truc du style configuration Scummvm ou autre).
Hello, on faisant une recherche "scummvm" via le moteur de recherche du forum, je suis tombé sur ton post. Pour accéder facilement au menu scummvm depuis recalbox, il suffit de presser
F5in-game, puis de cliquer surretour au lanceur. -
dang @aaron ! do you have anything connected beside one pad and what is your pad ?
-
wifi donge, keyboard and my xbox360 pad. wifi donge, keyboard and my ps4 pad. I have both kind of pads, but only one conected
-
try deconnecting keyboard reboot keeping xbox360 and launch game ?
-
Salut, J'ai un souci de CEC depuis mon passage sur la Beta 3.3. Le Pi est branché sur un ampli AV et lorsque je change de source ou allume l'ampli, ça bascule sur recalbox systématiquement. Du coup, pour changer de source, je dois le faire 2 fois. Le premier coup, quelque soit la source choisi, il rebascule sur Recalbox, ensuite je peux aller sur la source de mon choix. J'ai fait un test rapide hier en branchant la livebox à la place du pi et ce comportement a immédiatement disparu. Je ne pense donc pas que mon ampli soit en cause. En 3.2 je n'avais pas le souci mais il est présent sur toutes les beta 3.3 que j'ai testé. J'ai vu pas mal de paramètres touchant à l'HDMI dans le config.txt :
disable_overscan=0 hdmi_drive=2 config_hdmi_boost=0 hdmi_force_hotplug=0 hdmi_force_hotplug=1 config_hdmi_boost=4 overscan_left=24 overscan_right=24 overscan_top=16 overscan_bottom=16 disable_overscan=0 overscan_scale=1
Peut-être devrais-je faire le ménage par là ? Il me semble que sur ma raspbian, je n'ai rien mis de tout ça et que ça marche nickel.
-
I'll try it today. Other question: what kind of bluetooth donge should I buy to use my ps3 dualshock 3 sixaxis gamepad? thanks
-
@namu hdmi_force_hotplug=1 -> hdmi_force_hotplug=0 et commente hdmi_drive=2 et dis moi si ca change quelque chose.
-
@aaron go wiki -> compatibility list
-
I have a "Logilink BT0007A", but I can't sync this with the gamepad. should I change something in the recalbox.config?
-
Is your controller a chinese copy ? https://github.com/recalbox/recalbox-os/wiki/PS3-controllers-drivers-(EN)
-
No, is an original gamepad.
-
Please test the different driver
-
How can I do it?
-
Edit in recalbox.conf : https://github.com/recalbox/recalbox-os/wiki/recalbox.conf-(EN)
-
Malheureusement, ça ne marche pas mieux...
-
Namu -> ouvre un topic sur ton probleme, d'autres l'ont peut etre eu.
-
@digitallumberjack this is my recalbox.conf: # System Variable # You can configure your recalbox from here # To set a variable, remove the first ; on the line # ------------ A - ES Options ----------- # ## Pre-boot splash system.splash.enable=0 ## EmulationStation menu style ## default -> default all options menu ## none -> no menu except the game search menu ## bartop -> less menu, only needed for bartops system.es.menu=default ## Show or hide kodi in emulationstation (0,1) kodi.enabled=1 ## Start kodi at launch (0,1) kodi.atstartup=0 ## set x button shortcut (0,1) kodi.xbutton=0 # ------------ B - Network ------------ # ## Set system hostname system.hostname=RECALBOX ## Activate wifi (0,1) wifi.enabled=1 ## Wifi SSID (string) ;wifi.ssid=new ssid ## Wifi KEY (string) ;wifi.key=new key # ------------ C - Audio ------------ # ## Set the audio device (auto, hdmi, jack) audio.device=auto ## Set system volume (0..100) audio.volume=90 ## Enable or disable system sounds in ES (0,1) audio.bgmusic=1 # -------------- D - Controllers ----------------- # # Enable support for standard bluetooth controllers controllers.bluetooth.enabled=1 ## Please enable only one of these # -------------- D1 - PS3 Controllers ------------ # ##Enable PS3 controllers support controllers.ps3.enabled=1 ## Choose an driver beetween official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia) controllers.ps3.driver=official # ------------ D2 - XBOX Controllers ------------ # ## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues ## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1) ;controllers.xboxdrv.enabled=0 ## Set the amount of controllers to use with xboxdrv (0..4) ;controllers.xboxdrv.nbcontrols=2 # ------------ D3 - GPIO Controllers ------------ # ## GPIO Controllers ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1) ;controllers.gpio.enabled=0 ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2) ;controllers.gpio.args=map=1,2 ## DB9 Controllers ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1) ;controllers.db9.enabled=0 ## db9 arguments ;controllers.db9.args=map=1 ## Gamecon controllers ## Enable gamecon controllers, for nes, snes psx (0,1) ;controllers.gamecon.enabled=0 ## gamecon_args ;controllers.gamecon.args=map=1 # ------------ F - Language and keyboard ------------ # ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES) system.language=es_ES ## set the keyboard layout (fr,en,de,us,es) ;system.kblayout=us ## Set you local time ## Select your timezone from : ls /usr/share/zoneinfo/ (string) ;system.timezone=Europe/Paris # ------------ G - UPDATES ------------ # ## Automatically check for updates at start (0,1) updates.enabled=1 # ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ # ## The global value will be used for all emulators, exept if the value ## is redifined in the emulator ## Set game resolution for emulators ## select your mode from the command : tvservice -m [MODE] ## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced ## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive ## use 'default' for using the default resolution ## (string) global.videomode=CEA 4 HDMI ## Shader set ## Automatically select shaders for all systems ## (none, retro, scanlines) global.shaderset=none ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string) global.shaders= ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom) global.ratio=auto ## Set smooth for all emulators (0,1) global.smooth=1 ## Set rewind for all emulators (0,1) global.rewind=0 ## Set retroarch input driver (auto, udev, sdl2) ## If you don't have issues with your controllers, let auto global.inputdriver=auto ## If you do not want recalboxOS to generate the configuration for all emulators (string) ;global.configfile=/path/to/my/configfile.cfg # ------------ I - EMULATORS CHOICES ----------- # ## You can override the global configuration here ## Here is the snes example ;snes.videomode=CEA 4 HDMI ;snes.core=snes9x_next ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp ;snes.ratio=16/9 ;snes.smooth=0 ;snes.rewind=1 ;snes.emulator=libretro ## If you do not want recalboxOS to generate the configuration for the emulator : ;snes.configfile=/path/to/my/configfile.cfg ## The rewind option is deactivated by default on these unsupported cores (don't edit please) virtualboy.rewind=0 sega32x.rewind=0 segacd.rewind=0 psx.rewind=0 fbalibretro.rewind=0 vectrex.rewind=0 ## NeoGeo emulator ## You can use pifba or a libretro core (fba2x,libretro) neogeo.emulator=fba2x ## If you set libretro as neogeo.emulator, uncomment the line below and set the retroarch core (fba,imame4all) ;neogeo.core=fba ## N64 core (n64,rice) ## The recommanded plugin is n64, but if your game is not compatible, try rice plugin (example Zelda Ocarina of Time, Banjo Kazooie, ...) n64.core=n64 I think all is ok to sync with ps3 controller. Here is an attachment with a picture of my gamepad
-
Juste un ptit retour par rapport au theme emulationstation, je trouve que les jaquette snes et N64 ne sont pas mis en valeur trop petite a mon gout, étant donné quelle sont horizontale dans leur version europe et us (ce qui sont principalement utilisé) ce serait top de les ajuster un peu mais faut prendre aussi en compte que les jaquettes Jap sont verticale, faudrais trouver un compromis.
-
In my way to configurate 100% my recalbox I have 3 "big" issues. 1st: I can't syncronice my sixaxis ps3 controler, but @digitalLumberjack<span style="line-height: 1.5;"> is on it! Thanks!</span> Can you look what I posted about my recalbox.conf? thank you so much! 2nd: I can't play to Crash Team Racing, I tried a lot of configurations but the game become into a blackscreen after 10 seconds, but @voljega is on it! Thanks. I Tried to reboot the system with the gamepad plug in only, but doesn't matter because is not working yet. 3rd: I can't configurate my xbox360 gamepad to play to n64 games, I have followed https://github.com/recalbox/recalbox-os/wiki/Configure-N64-controllers-(EN) but @rockaddicted is on it! Thanks!! Sould I change the parameters of "plugged" in all devices or only in XBOX 360 original? I mean, all in plugged False and Xbox plugged true? Thanks to all of you, I really apreciated this help and sorry for my noobs skills with recalbox and my english
-
@aaron Well aaron I'm sorry to disappoint you but I'm not exactly 'on' anything ! I just tried to help you, but I'm now at a loss to find an explanation for your problem... Except maybe to check if you didn't forget to unecm the bin file I gave you the link to in case it was ecm'ed... (file should be a .ecm if it's the case) Besides I'm not a member of a Recalbox team, just a fellow user like you
