[SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI

[cosmo0]

New version : v4.1

https://github.com/cosmo0/arcade-manager/releases

This is a bugfix release.

Changelog

• Displays file size when copying rom files (copying large files would make it look like it crashed)
• Activates the menus on MacOS so you can now copy/paste
• Fixes the "only keep roms" feature, which didn't work at all (small typo in the code)
• Changes the files order in the "download CSV file" screen

[cosmo0]

@olliko said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

@cosmo0 Yes, this is the Problem. Sorry for the bad english. The problem is in Mame and FBA, i use Recalbox on a raspberry 3. As i tested it, the problem comes in every case. For example i started 1941 with bezel and then balloon Brothers. The 1941 bezel is displayed in balloon Brothers. (FBA). But i have forgotten to thank you for the great program you did.

I'm sorry but I can't reproduce the problem. I have launched a game with overlay then one without, and I have no overlay in the second game.
I'm using Recalbox 18.04.20 with no configuration or tuning whatsoever.

[Olliko]

@cosmo0 thanks for your effort. I use the same version. Maybe i have something damaged in the past. I have the share partition on a usb stick. I think i install recalbox again, also the roms.

[cosmo0]

@olliko said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

@cosmo0 thanks for your effort. I use the same version. Maybe i have something damaged in the past. I have the share partition on a usb stick. I think i install recalbox again, also the roms.

Do you use fba or fba_libretro ?

[snwfrd38]

I manually managed my overlays and tried your app with a lot of enthusiam as it can really be great for the overlays.
It seems it creates well the .cfg and .png file howevet thr .zip.cfg was not created in my case.
Thus it didn’t work so far.

The second topic is that the overlays are 1920x1080 and my config is in 1280x1080 so i wonder if it can manage it. Keep the good work it looks promising!

[cosmo0]

@snwfrd38 said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

I manually managed my overlays and tried your app with a lot of enthusiam as it can really be great for the overlays.
It seems it creates well the .cfg and .png file howevet thr .zip.cfg was not created in my case.
Thus it didn’t work so far.

Where did you check the .zip.cfg creation ? They should be saved in the share/overlays/, not alongside the roms.
Have you tried the games, to see if they had the overlay?

The second topic is that the overlays are 1920x1080 and my config is in 1280x1080 so i wonder if it can manage it.

No, they are 1080p (1920x1080). I should write that somewhere...

Keep the good work it looks promising!

Thanks

[SuperMagicom]

@cosmo0 I noticed your program wasn't finding a lot of the overlays for my games. It turns out I was using the U.S. versions of many roms and the software is only looking for the parent rom, which is usually the "World" version. For example, I had sf2ceua.zip for Street Fighter II: Champion Edition and it wouldn't add the overlay. When I replaced it with the "World" version sf2ce.zip it worked fine. If people are having similar problems that might be why.

[cosmo0]

New release : v4.2

Fixes the rom copy (sorry...)

https://github.com/cosmo0/arcade-manager/releases

[cosmo0]

@supermagicom said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

@cosmo0 I noticed your program wasn't finding a lot of the overlays for my games. It turns out I was using the U.S. versions of many roms and the software is only looking for the parent rom, which is usually the "World" version. For example, I had sf2ceua.zip for Street Fighter II: Champion Edition and it wouldn't add the overlay. When I replaced it with the "World" version sf2ce.zip it worked fine. If people are having similar problems that might be why.

Yeah, installing overlays for clones is a feature I plan to implement some day.
It's a bit complicated because each MAME version has slightly different clones, but I can still do something.
I'll b*mp up the feature in the TODO list

[Olliko]

@cosmo0 i use fba_libretro.

[cosmo0]

@olliko said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

@cosmo0 i use fba_libretro.

Well that's what I used too... weird...

Anyone else had the same problem ?

[gnubit]

@cosmo0

Thanks for the app, but I`m having troubles with it also.

The overlays are downloading to /recalbox/share/system/configs/overlays/fba_libretro (when I tell the app the roms are located at "/recalbox/share/roms/fba_libretro") which is great, but the .cfg files are referring to an incorrect path.
the *.zip.cfg are located at /recalbox/share/system/configs/overlays/fba_libretro

As example (3countb.zip.cfg) lists this in the file:

input_overlay = /recalbox/share/overlays/fba_libretro/arcade-artwork/3countb.cfg
input_overlay_enable = true
input_overlay_opacity = 0.900000
input_overlay_scale = 1.000000

ie: not referring to "/recalbox/share/system/configs/overlays/fba_libretro/arcade-artwork" where the artwork is located

I have tried in the configs setup in the app to use "/recalbox/share/system/configs" and
"/recalbox/share/system/configs/retroarch/overlays" (where another overlay path is used, for example zover4recalbox `s overlay) with the same result.

I am currently using pack01-clean-1080 from zover4recalbox for my libretro cores which work. Is there a conflict with them, or just the *.zip.cfg are referring the wrong path?, or perhaps I`m just doing it wrong and need a little guidance.
Thanks in advance.

[Substring]

Stupid question as i was really lazy to read the whole topic and test the software : can it check roms against dat files ?

[cosmo0]

@gnubit said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

@cosmo0

Thanks for the app, but I`m having troubles with it also.

The overlays are downloading to /recalbox/share/system/configs/overlays/fba_libretro (when I tell the app the roms are located at "/recalbox/share/roms/fba_libretro") which is great, but the .cfg files are referring to an incorrect path.
the *.zip.cfg are located at /recalbox/share/system/configs/overlays/fba_libretro

As example (3countb.zip.cfg) lists this in the file:

input_overlay = /recalbox/share/overlays/fba_libretro/arcade-artwork/3countb.cfg
input_overlay_enable = true
input_overlay_opacity = 0.900000
input_overlay_scale = 1.000000

ie: not referring to "/recalbox/share/system/configs/overlays/fba_libretro/arcade-artwork" where the artwork is located

I have tried in the configs setup in the app to use "/recalbox/share/system/configs" and
"/recalbox/share/system/configs/retroarch/overlays" (where another overlay path is used, for example zover4recalbox `s overlay) with the same result.

I am currently using pack01-clean-1080 from zover4recalbox for my libretro cores which work. Is there a conflict with them, or just the *.zip.cfg are referring the wrong path?, or perhaps I`m just doing it wrong and need a little guidance.
Thanks in advance.

Hello

The overlays should actually be downloaded to /recalbox/share/overlays/fba_libretro/.

Are you telling the software to download to /recalbox/share/system/configs/, or is it doing that automatically?

@substring said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

Stupid question as i was really lazy to read the whole topic and test the software : can it check roms against dat files ?

Nope it doesn't rebuild romsets.

[gnubit]

@cosmo0

Thanks for the reply. It looks like it may be doing it automatically.

I tried again with these inputs:

Roms folders
/run/user/1000/gvfs/sftp:host=XXX.XXX.X.XXX/recalbox/share/roms/fba_libretro

Config share
/run/user/1000/gvfs/sftp:host=XXX.XXX.X.XXX/recalbox/share/system

with the same result.

[Substring]

@cosmo0 i dont mean "rebuild", i mean simply check if the rom is valid

[cosmo0]

@gnubit said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

Config share
/run/user/1000/gvfs/sftp:host=XXX.XXX.X.XXX/recalbox/share/system

Config share should be just recalbox/share, not /system Let me know if it fixes it

And sorry, I didn't test my program with Linux every distro seems to have a different method for accessing , and apparently even the same distro can change the path to access Samba share from version to version... I've made things automagical for Windows and MacOS but Linux looks too hard

[cosmo0]

@substring said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

@cosmo0 i dont mean "rebuild", i mean simply check if the rom is valid

No, sorry.

First, because CLR Mame Pro already does that, and it works under all platforms (using Wine for Mac/Linux). Despite the... complicated interface, I'm not a fan of doing things that have already been done.

And second, because this tool was designed for Retropie at the beginning, and this feature wouldn't make sense in Retropie, between the "arcade" folder, the multiple MAME versions, etc. As you're probably aware, Retropie is... complicated

I might do it in a later version, though, it's not really complicated (open a zip file, checksum the files inside, check against data in an XML...).

[Substring]

@cosmo0 said in [SOFT] Arcade Manager : install overlays and manage roms in a user-friendly, fast and cross-platform GUI:

I might do it in a later version, though, it's not really complicated (open a zip file, checksum the files inside, check against data in an XML...).

Indeed hence my suggestion

[gnubit]

@cosmo0

Yippie! it works with the config share as /recalbox/share

You may want to mention the config share path in the help section for linux on your next release.

Many thanks