Posts made by adam0509

@Olivier59113 je sais plus mais perso j'ai réussi à y faire tourner Swat...

Modifier un émulateur sur recalbox, mission quasi impossible

sur retropie c'est plus permissif

This will work both for DOSBOX and DOSBOX PURE

Dosbox Pure will help you running the game without a Keyboard (and also use Save States)

Dosbox (normal)

Grab that config file :

# This is the configurationfile for DOSBox 0.74. (Please use the latest version of DOSBox)
# Lines starting with a # are commentlines and are ignored by DOSBox.
# They are used to (briefly) document the effect of each option.

[sdl]
#       fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)
#       fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox.
#   fullresolution: What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
#                     Using your monitor's native resolution with aspect=true might give the best results.
#                     If you end up with small window on a large screen, try an output different from surface.
# windowresolution: Scale the window to this size IF the output device supports hardware scaling.
#                     (output=surface does not!)
#           output: What video system to use for output.
#                   Possible values: surface, overlay, opengl, openglnb, ddraw.
#         autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)
#      sensitivity: Mouse sensitivity.
#      waitonerror: Wait before closing the console if dosbox has an error.
#         priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.
#                     pause is only valid for the second entry.
#                   Possible values: lowest, lower, normal, higher, highest, pause.
#       mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the defaul value.
#     usescancodes: Avoid usage of symkeys, might not work on all operating systems.

fullscreen=true
fulldouble=false
fullresolution=1280x720
windowresolution=original
output=surface
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper-0.74.map
usescancodes=true

[cpu]
# core -- CPU Core used in emulation: normal,simple,dynamic,auto.
#         auto switches from normal to dynamic if appropriate.
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
#           Setting this value too high results in sound dropouts and lags.
#           You can also let DOSBox guess the correct value by setting it to max.
#           The default setting (auto) switches to max if appropriate.
# cycleup   -- Amount of cycles to increase/decrease with keycombo.
# cycledown    Setting it lower than 100 will be a percentage.

core=auto
cycles=10000
cycleup=500
cycledown=500

[dosbox]
# language: Select another language file.
#  machine: The type of machine tries to emulate.
#           Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.
# captures: Directory where things like wave, midi, screenshot get captured.
#  memsize: Amount of memory DOSBox has in megabytes.
#             This value is best left at its default to avoid problems with some games,
#             though few games might require a higher value.
#             There is generally no speed advantage when raising this value.

language=
machine=svga_s3
captures=capture
memsize=16


[render]
# frameskip: How many frames DOSBox skips before drawing one.
#    aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!.
#    scaler: Scaler used to enlarge/enhance low resolution modes.
#              If 'forced' is appended, then the scaler will be used even if the result might not be desired.
#            Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.

frameskip=0
aspect=true
scaler=normal2x

[cpu]
#      core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.
#            Possible values: auto, dynamic, normal, simple.
#   cputype: CPU Type used in emulation. auto is the fastest choice.
#            Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
#    cycles: Amount of instructions DOSBox tries to emulate each millisecond.
#            Setting this value too high results in sound dropouts and lags.
#            Cycles can be set in 3 ways:
#              'auto'          tries to guess what a game needs.
#                              It usually works, but can fail for certain games.
#              'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.
#                              (Example: fixed 4000).
#              'max'           will allocate as much cycles as your computer is able to handle.
#            
#            Possible values: auto, fixed, max.
#   cycleup: Amount of cycles to decrease/increase with keycombo.(CTRL-F11/CTRL-F12)
# cycledown: Setting it lower than 100 will be a percentage.

core=auto
cputype=auto
cycles=auto
cycleup=10
cycledown=20

[mixer]
#   nosound: Enable silent mode, sound is still emulated though.
#      rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
#            Possible values: 1024, 2048, 4096, 8192, 512, 256.
# prebuffer: How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=44100
blocksize=1024
prebuffer=20

[midi]
#     mpu401: Type of MPU-401 to emulate.
#             Possible values: intelligent, uart, none.
# mididevice: Device that will receive the MIDI data from MPU-401.
#             Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.
#               See the README/Manual for more details.

mpu401=intelligent
mididevice=default
midiconfig=

[sblaster]
#  sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
#          Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
#  sbbase: The IO address of the soundblaster.
#          Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
#     irq: The IRQ number of the soundblaster.
#          Possible values: 7, 5, 3, 9, 10, 11, 12.
#     dma: The DMA number of the soundblaster.
#          Possible values: 1, 5, 0, 3, 6, 7.
#    hdma: The High DMA number of the soundblaster.
#          Possible values: 1, 5, 0, 3, 6, 7.
# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
#          Possible values: auto, cms, opl2, dualopl2, opl3, none.
#  oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
#          Possible values: default, compat, fast.
# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
#          Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.

sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
sbmixer=true
oplmode=auto
oplemu=default
oplrate=44100

[gus]
#      gus: Enable the Gravis Ultrasound emulation.
#  gusrate: Sample rate of Ultrasound emulation.
#           Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
#  gusbase: The IO base address of the Gravis Ultrasound.
#           Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
#   gusirq: The IRQ number of the Gravis Ultrasound.
#           Possible values: 5, 3, 7, 9, 10, 11, 12.
#   gusdma: The DMA channel of the Gravis Ultrasound.
#           Possible values: 3, 0, 1, 5, 6, 7.
# ultradir: Path to Ultrasound directory. In this directory
#           there should be a MIDI directory that contains
#           the patch files for GUS playback. Patch sets used
#           with Timidity should work fine.

gus=false
gusrate=44100
gusbase=240
gusirq=5
gusdma=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker: Enable PC-Speaker emulation.
#    pcrate: Sample rate of the PC-Speaker sound generation.
#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
#     tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
#            Possible values: auto, on, off.
# tandyrate: Sample rate of the Tandy 3-Voice generation.
#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
#    disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).

pcspeaker=true
pcrate=44100
tandy=auto
tandyrate=44100
disney=true

# [joystick]
# joysticktype: Type of joystick to emulate: auto (default), none,
#               2axis (supports two joysticks),
#               4axis (supports one joystick, first joystick used),
#               4axis_2 (supports one joystick, second joystick used),
#               fcs (Thrustmaster), ch (CH Flightstick).
#               none disables joystick emulation.
#               auto chooses emulation depending on real joystick(s).
#               (Remember to reset dosbox's mapperfile if you saved it earlier)
#               Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
#        timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
#     autofire: continuously fires as long as you keep the button pressed.
#       swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
#   buttonwrap: enable button wrapping at the number of emulated buttons.

# joysticktype=auto
# timed=true
# autofire=false
# swap34=false
# buttonwrap=false

[serial]
# serial1: set type of device connected to com port.
#          Can be disabled, dummy, modem, nullmodem, directserial.
#          Additional parameters must be in the same line in the form of
#          parameter:value. Parameter for all types is irq (optional).
#          for directserial: realport (required), rxdelay (optional).
#                           (realport:COM1 realport:ttyS0).
#          for modem: listenport (optional).
#          for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
#                         transparent, port, inhsocket (all optional).
#          Example: serial1=modem listenport:5000
#          Possible values: dummy, disabled, modem, nullmodem, directserial.
# serial2: see serial1
#          Possible values: dummy, disabled, modem, nullmodem, directserial.
# serial3: see serial1
#          Possible values: dummy, disabled, modem, nullmodem, directserial.
# serial4: see serial1
#          Possible values: dummy, disabled, modem, nullmodem, directserial.

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
#            xms: Enable XMS support.
#            ems: Enable EMS support.
#            umb: Enable UMB support.
# keyboardlayout: Language code of the keyboard layout (or none).

xms=true
ems=true
umb=true
keyboardlayout=auto

[ipx]
# ipx: Enable ipx over UDP/IP emulation.

ipx=false

[autoexec]
@echo off
keyb fr
mount C /recalbox/share/roms/dos/prince2.pc

cls
echo.-----------------------------------------------
echo   Prince of Persia 2 - The Shadow & The Flame
echo.         VERSION DISQUETTE ANGLAISE
echo.-----------------------------------------------
echo www.abandonware-france.org
echo.-----------------------------------------------
echo DOSBox v0.74
echo.-----------------------------------------------
echo Commandes de base pour Dosbox :
echo ALT + ENTREE - MODE PLEIN ECRAN/FENETRE
echo CTRL + F5 - CAPTURE D'ECRAN
echo CTRL + F10 - CAPTURER/LIBERER LE CURSEUR
echo CTRL + F12/11 - AUGMENTER/REDUIRE LA VITESSE
echo CTRL + F9 - QUITTER DOSBOX
echo.-----------------------------------------------
echo.
echo.
pause
c:
PRINCE.exe
exit

DOSBOX PURE :

The difficulty here is to have the correct ratio. You'll need to activate "Pixel Perfect" (or "Integer scale") on the Recalbox Setting menu first.

Also maybe you need to put 16/9 here, I'm not sure :

Then on Dosbox Pure, Just follow those parameters :

The game should run at full speed on a Raspberry Pi4

Pi5 may autorise rewind also (Pi4 can't handle it).

Please note that Dosbox Pure will also let you use save states... which is VERY useful in that game.

PM Me if you need save file

Some of you may have try that interesting hack of Goldeneye 64 which let you play Counter-Strike maps on Goldeneye 64.

By default, you may have these annoying white flickering :

To resolve this, just go to this folder :

/recalbox/share/system/configs/mupen64

Then open this file :

Glide64mk2.ini

Find the GOLDENEYE config and change fb_hires to 0 instead of 1 like this :

[GOLDENEYE]
lodmode = 1
filtering = 1
fb_smart = 1
fb_hires = 0

Relaunch the emualtor and the problem will be solved.

Another method is to put the game on full screen, but I don't remember how to do that.

P.S : If you have trouble on your controller, you may need to use the defaut InputAutoCfg.ini found here (the defaut recalbox may not suit your config)

https://github.com/mupen64plus/mupen64plus-input-sdl/blob/master/data/InputAutoCfg.ini

is it the only way to modify recalbox.conf now ?

https://wiki.recalbox.com/en/tutorials/video/display-configuration/complete-video-configuration-guide

Hi,

Recalbox is laggy on a 4k tv, even the SNES and NES

I try to change the resolution, normally here there is a resolution option (under Recalbox CRT)... why it's not here ??

Juste une précision :

Pour les jeux FMV, choisir l'émulateur LIBRETRO YABASANSHIRO

Perso j'ai aussi ajouté ça pour optimiser un peu, je sais pas si ça fait un gros changement :

optimize_texrect = 0
hires_buf_clear = 0
fb_read_alpha = 0
force_calc_sphere = 0
texture_correction = 0

Hello,

Je ne sais pas pourquoi, mais sur Mupen Glide MK2 l'ordre de mes manettes est modifié

Sur Recalbox :
1/ Manette Power A Xbox One
2/ Manette Xbox 360

Sur l'émulateur, c'est l'inverse

Pourtant c'est toujours la manette 1 qui peut revenir au menu Recalbox avec le Hotkey....

(Pas ce souci avec PARALLEL 64)

Recalbox 9.2.1

Juste un truc si vous avez des clignotements blanc sur Goldeneye 007 N64 (et sur des hacks en particulier genre CS MAPS ou Kokorico) :

Mettre ce paramètre à 0 :
fb_hires = 0

[GOLDENEYE]
lodmode = 1
filtering = 1
fb_smart = 1
fb_hires = 0

Et si vous preferez le plein écran :

aspect = 1

Ok solved it

This concern is for the PowerA Xbox One Controller

It is labeled PowerA Xbox One Series X Controller in the config for some reason (?)

Button configuration on windows :

1 = A
2 = B
3 = X
4 = Y
5 = LB
6 = RB
7 = Select
8 = Start
9 = L3
10 = R3
11 = Xbox Guide
12 = Share

Button configuration on Linux/Recalbox :

0 = A
1 = B
2 = X
3 = Y
4 = LB
5 = RB
6 = Select
7 = Start
8 = L3
9 = R3
10 = Xbox Guide
11 = Share

This is the correct configuration to add to InputAutoCfg.ini :

[PowerA Xbox Series X Controller]
A Button=button(0)
AnalogDeadzone=4096,4096
AnalogPeak=32768,32768
B Button=button(2)
C Button D=axis(4+) button(1)
C Button L=axis(3-) button(3)
C Button R=axis(3+) 
C Button U=axis(4-) 
DPad D=hat(0 Down)
DPad L=hat(0 Left)
DPad R=hat(0 Right)
DPad U=hat(0 Up)
L Trig=button(4)
Mempak switch=button(11)
R Trig=button(5)
Rumblepak switch=button(12)
Start=button(7)
X Axis=axis(0-,0+) axis(0+,0-)
Y Axis=axis(1-,1+) axis(1+,1-)
Z Trig=axis(2+)
mouse=False
plugged=True
plugin=2

So I updated to version 9.2.1
Reset the config

(fyi, I have a PowerA Xbox360 controller)

Everything work on other emulator.

On N64 nothing works with "MupenGlideMk2". On "Parallel" emulator it's ok.

I dig in the system file. I use an old "InputAutoCfg.ini" file, now it works.

(file is located in /recalbox/share/system/configs/mupen64)

But :

• I have Z on Select button
• I have Start on L3 button

Everything was working on 9.1... what happened ?

Maybe same problem as here :

https://forum.recalbox.com/topic/30319/configuration-n64-glide/6?_=1697275006817

Peut-être une piste ici :

https://forum.recalbox.com/topic/25366/fichier-mupen64plus-cfg-réécrit-à-chaque-démarrage/3

@stedurst you probably have to tweak a .cfg file

if you can access trough web browser you can do it from there I guess

You'll need to hack the console to install homebrew

honestly not worth it, just sell it and by a Pi5 or Mini PC

@julesdesf said in Doublons jeux Dreamcast:

une solution :

https://wiki.recalbox.com/fr/emulators/consoles/dreamcast/libretro-flycast

pas compris ta solution ??

Sinon les CHD c'est mieux ça prend moins de place

@André-0 je crois pas que le bios de la PS2 influe sur le changement de la langue mais à voir

Sinon c'est juste que tu as qui est par défaut comme ça...

@adam0509 Encore quelques infos :

On peut appeler le menu RetroArch (avec HOTKEY + A) on a aussi accès à des changements de touche éventuel mais bof bof mieux vaut pas toucher je pense !

On peut trouver le fichier "mame.ini" ici mais il contient pas trop d'infos utiles :

\Recalbox\share\saves\mame\mame2010\ini\

On trouve 1 fichier de config (*.cfg) par jeu ici (dans un format qui ressemble à du XML)

\Recalbox\share\saves\mame\mame2010\cfg

QUESTION : est-il possible de reset ce fichier autrement qu'en le supprimant ? (genre depuis le menu de Emulation Station) ?

Ah je veux bien aussi qu'on m'expliquer comment supprimer un assignement sur MAME... c'est SUPPR ou RETURN (la touche au dessus de "entrée") ?

@davidb2111 ben franchement entre recalbox 8.1 et 9.1 c'est toujours les mêmes soucis

La moitié des topics ici c'est des histoires de config de manettes...

je sais bien que vous ne pouvez pas avoir toutes les manettes à vos dispositions pour tester mais tout de même... les manettes bluetooth c'est toujours ce problème là.

Je fais ma part du boulot en remontant ce que je peux.

D'ailleurs j'ai fait un gros topic aujourd'hui tu va voir c'est sympa et détaillé :

https://forum.recalbox.com/topic/30654/hori-fighting-stick-mini-tutoriel-mame-street-fighter-2-questions