Blast city et raspberry

acris

poste le résultat de la commande : tvservice -m DMT

citroevo

comment faire?

acris

utilise putty en ssh voir le wiki.

citroevo

Désolé mais j'aurais du préciser que je suis novice.
Est ce que tu peux décomposer les étapes pour arriver a te répondre?
Merci

acris

Bonjour
nous allons faire plus simple :
si tu es sous windows configure entièrement ses logiciels : https://github.com/recalbox/recalbox-os/wiki/acces-via-WinSCP-(FR)
uen fois fait poste l'archive demandé dans ce sujet : https://github.com/recalbox/recalbox-os/wiki/Recalbox-support--(FR)

citroevo

Je suis tombé la dessus, est ce que cela peut aider?

# System Variable
# You can configure your recalbox from here
# To set a variable, remove the first ; on the line



# ------------ A - System Options ----------- #
#    Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=PIN56ONOFF          # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH           # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET    # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

## Recalbox Manager (http manager)
system.manager.enabled=1

## Recalbox API (REST)
system.api.enabled=0

## EmulationStation menu style 
## default -> default all options menu
## none -> no menu except the game search menu
## bartop -> less menu, only needed for bartops
system.es.menu=default

## Emulator special keys
## default -> default all special keys
## nomenu -> cannot popup the emulator menu
## none -> no special keys in emulators
system.emulators.specialkeys=default

## Show or hide kodi in emulationstation (0,1)
kodi.enabled=1
## Start kodi at launch (0,1)
kodi.atstartup=0
## set x button shortcut (0,1)
kodi.xbutton=0

## Kodi can wait for a network component before starting
## waithost is the ip or hostname that must answer to a ping to validate the availability
## waittime is the maximum time waited when kodi boots
## if waitmode is required, kodi will not start if the component is not available
## if waitmode is wish, kodi will start if the component is not available
## if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50

# ------------ B - Network ------------ #
## Set system hostname
system.hostname=RECALBOX
## Activate wifi (0,1)
wifi.enabled=1
## Wifi SSID (string)
wifi.ssid=Livebox-5292
## Wifi KEY (string)
## Escape your special chars (# ; $) with a backslash : $ => \$
wifi.key=8732 E62E F126 E345 67A9 A38A 54
## Samba share
system.samba.enabled=1
### Virtual Gamepads
system.virtual-gamepads.enabled=1
### SSH
system.ssh.enabled=1

# ------------ C - Audio ------------ #
## Set the audio device (auto, hdmi, jack)
audio.device=jack
## Set system volume (0..100)
audio.volume=100
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=0



# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1


## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=official


# ------------ D2 - XBOX Controllers ------------ #
## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues 
## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=0
## Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=2


# ------------ D3 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2


## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1

## Gamecon controllers
## Enable gamecon controllers, for nes, snes psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1

## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1



# ------------ F - Language and keyboard ------------ #
## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=fr_FR
## set the keyboard layout (fr,en,de,us,es)
;system.kblayout=us
## Set you local time
## Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris



# ------------ G - UPDATES ------------ #
## Automatically check for updates at start (0,1)
updates.enabled=1
# default : stable ; set to beta to get the next version currently being tested. set to unstable at your own risk to get the development version.
updates.type=stable


# ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
## The global value will be used for all emulators, except if the value
## is redefined in the emulator

## Set game resolution for emulators
## select your mode from the command : tvservice -m [MODE]
## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced 
## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
## use 'default' for using the default resolution
## (string)
global.videomode=default## Shader set 
## Automatically select shaders for all systems
## (none, retro, scanlines)
global.shaderset=retro

## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=0

## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=

## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto

## Set smooth for all emulators (0,1)
global.smooth=0

## Set rewind for all emulators (0,1)
global.rewind=0

## Set autosave/load savestate for all emulators (0,1)
global.autosave=1

## Enable retroarchievements (0,1)
## Set your www.retroachievements.org username/password
## Escape your special chars (# ; $) with a backslash : $ => \$
global.retroachievements=1
global.retroachievements.username=
global.retroachievements.password=

## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=auto

## If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg

# ------------ I - EMULATORS CHOICES ----------- #
## You can override the global configuration here
## Here is the snes example
;snes.videomode=CEA 4 HDMI
snes.core=snes9x_next
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0
## If you do not want recalboxOS to generate the configuration for the emulator : 
;snes.configfile=/path/to/my/configfile.cfg

## Default cores for RPi3
snes.core=snes9x_next
gba.core=mgba
mame.core=mame078
nes.core=fceunext

## NeoGeo emulator 
## You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
neogeo.core=fba

## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
## If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
n64.videomode=DMT 4 HDMI
## If you are using a CRT screen, please change the setting above with this one : 
# n64.videomode=default

## Configurations generated by Recalbox
fba_libretro.autosave=0
megadrive.autosave=1
fba.emulator=default

citroevo

http://dl.free.fr/getfile.pl?file=/86gBmAx1

Voila je crois avoir saisi ta demande acris

@acris said in Blast city et raspberry:

Bonjour
nous allons faire plus simple :
si tu es sous windows configure entièrement ses logiciels : https://github.com/recalbox/recalbox-os/wiki/acces-via-WinSCP-(FR)
uen fois fait poste l'archive demandé dans ce sujet : https://github.com/recalbox/recalbox-os/wiki/Recalbox-support--(FR)

http://dl.free.fr/getfile.pl?file=/86gBmAx1

Voila je crois avoir saisi ta demande acris

citroevo

Group DMT has 10 modes:
mode 4: 640x480 @ 60Hz 4:3, clock:25MHz progressive
mode 16: 1024x768 @ 60Hz 4:3, clock:65MHz progressive
mode 28: 1280x800 @ 60Hz 16:10, clock:83MHz progressive
mode 32: 1280x960 @ 60Hz 4:3, clock:108MHz progressive
mode 35: 1280x1024 @ 60Hz 5:4, clock:108MHz progressive
mode 37: 1280x1024 @ 85Hz 5:4, clock:157MHz progressive
mode 39: 1360x768 @ 60Hz 16:9, clock:85MHz progressive
mode 47: 1440x900 @ 60Hz 16:10, clock:106MHz progressive
mode 48: 1440x900 @ 75Hz 16:10, clock:136MHz progressive
mode 85: 1280x720 @ 60Hz 16:9, clock:74MHz progressive

acris

ian57 se débrouille bien en résolution video, peut être qu'il pourra t'aider @ian57 une idée ?

ian57

hello,

pour ES, à la vue de ton tvservice tu peux utiliser plusieurs mode pour es, mais je sais pas si l'ecran de la blast va suivre au niveau fréquence... je pense que le plus sage est d'utiliser le mode 480 et utiliser un theme modifié pour la résolution : celui ci par exemple https://mega.nz/#!agdiQA4J!uDRJ3cPBkgYWJ-VKc1exJb5WlSYivX4HSsS--xES3nA je l'utilise pour le hdmi rgb sur cathodique

dans le recalbox.conf il faut modifier

system.es.videomode=DMT 4 HDMI

tiens nous au courant

Substring

@ian57 said in Blast city et raspberry:

dans le recalbox.conf il faut modifier
system.es.videomode=DMT 4 HDMI

tiens nous au courant

HOP HOP HOP HOP HOP !!!!! Ca ne marche qu'en 4.1 cette option !!!

ian57

et alors elle est sortie non ?

Substring

@ian57 que pour les fidèles courageux pour chasser du bug ! (et les impatients ...)

ian57

@Substring moi je l'ai senti impatient la quand même

Substring

@ian57 peu importe, 15kHz on n'y est pas encore

citroevo

Pour le moment je reste en 4.02;-)

citroevo

Pour ce qui est du thème de ma recalbox est justement le thème Eudora qui est apriori adaptés à de basses résolution ?

citroevo

Personne ?

voljega

@citroevo je ne crois pas qu'il soit spécialement conçu pour la basse def mais vu qu'il y an trois différents y'en a bien un qui doit passer

citroevo

@voljega
Je les ai essayé mais le soucis reste entier.
Je me demande donc s'il n'y a pas un soucis dans mon .conf?

Blast city et raspberry

Want to support us ?

88
Online

99.6k
Users

28.1k
Topics

187.1k
Posts

Blast city et raspberry

Want to support us ?

88Online

99.6kUsers

28.1kTopics

187.1kPosts

88
Online

99.6k
Users

28.1k
Topics

187.1k
Posts