Problem USB encoder Recalbox x_64

[Dantemax]

hello,

I have a arcadecab and I want to modify it and place a Recalbox PC.

I have installed the recalbox 7.2.2 on a PC_X64 and I have a problem with my joystick panel.
I have one USB controller MR-P022 installed in my arcadecab with a panel for 2 players.
Recalbox recognize one MICREAL USB Controller but not the second one.
Then I have tried with a Raspeberry PI3 B+, I have add the command line "usbhid.quirks=0x0314:0x0324:0x040" in the CMDLINE.TXT and it worked. The 2 joysticks were recognized.

Is there a way to do the same with the X_64 version ?

I search in internet and various forum but I do not find the solution for the x_64 version.
thanks for your help.

B.R.
Max

[Dantemax]

@dantemax said in Problem USB encoder Recalbox x_64:

hello,

I have a arcadecab and I want to modify it and place a Recalbox PC.

I have installed the recalbox 7.2.2 on a PC_X64 and I have a problem with my joystick panel.
I have one USB controller MR-P022 installed in my arcadecab with a panel for 2 players.
Recalbox recognize one MICREAL USB Controller but not the second one.
Then I have tried with a Raspeberry PI3 B+, I have add the command line "usbhid.quirks=0x0314:0x0324:0x040" in the CMDLINE.TXT and it worked. The 2 joysticks were recognized.

Is there a way to do the same with the X_64 version ?

I search in internet and various forum but I do not find the solution for the x_64 version.
thanks for your help.

here is the log : https://transfer.sh/1m7GfR9/recalbox-support-d49f1e26-651b-daba-0e69-26efc9e19c3c.tar.gz

BR
Max

[Zing]

@dantemax Sorry, I'm not a developer, and I'm not sure how to solve this problem, I can't test it on the PC version right now, but searching a little bit I found this old issue:

https://gitlab.com/recalbox/recalbox/-/issues/519

As you can see, the user mentions that it is possible to edit the "usbhid.conf" file.

Searching here on the forum, I found this topic:
https://forum.recalbox.com/topic/17128/dualshock-2-manque-3-boutons

Check if this helps, and give feedback.

[Dantemax]

hello,

thank you for the reply.
I have found the solution in this topic :

https://forum.recalbox.com/topic/11632/encodeur-micreal-dual-arcade-non-reconnu?_=1629830593023

best regards
Max