Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[Gaetan]

@substring I'm in, but do you have a deadline to make the test ?
While I'm on vacation after tomorow I'll bring my Recalbox with me. But for sure being away from my own pc will slower my test's process. In 10 days I'll be back for good, will it be to late ?

[voljega]

Img for x86 would be good too, to facilitate beta testing (can't test this beta at all with the update branch system on a x86 not managing to display anything with current version like gpd win)

[Substring]

@voljega 32 or 64 bit ? This version works with the only cherry trail i have, but it's lacking sound

[abunille]

PS3 Controller need remapping.
Tested with genuine DS3

[Substring]

@abunille ok, please make a support archive so that i get your new mapping please

Some people reported on RP that the motion sensors where behaving like a pad, did you face the same problem ?

[voljega]

@substring x64

[Substring]

@voljega 1st post updated

[MikOzzZ]

Hello ,

• PI3b+ , clean image installation, controller xbox360

1. The virtual keyboard is not visible

2. Wifi problem : once the activated wifi can not connect via the network

[voljega]

@substring merci bon je pourrais pas tester avant une semaine de toute façon

[kelv]

@substring said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com

Hello I've just installed the img and change the update.type to https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com .

I'm using a xbox 360 wired controller. I tried to open kodi and it's not opened, bringing me back to emulationstation.

Steps.

• Install the img in a sd-card for running into a rpi3+
• Modify the updated.type https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com
• tap Y button at the pad.
• Select Kodi Media Center.

The Support file is here

https://file.ac/F6tbOxtHZBM/

thx

[olivierdroid92]

@Substring
Bonjour Substring et bravo pour le travail

Using a new RPI3B+ I've downloaded IMG from link https://wetransfer.com/downloads/001a87b22467ab20ba97a6e2bcadf64020180814205142/64afb2 on a fresh new SD card.
Running on a SAMSUNG LCD Screen with Wired game pad I failed to run games. No games is running NES, SNES, Master System etc ...
I see only game intro and after a while back to ES game list ....
I do not know what i've missed.
Merci pour votre aide

[kelv]

@olivierdroid92 Same here I thought that Kodi was not working however it seems that the emulators are not working too.

[Bkg2k]

@olivierdroid92 & @kelv : Remap your pad(s) using the appropriate menu option. Updating or running a fresh install does the same.

[olivierdroid92]

@Bkg2k
Thanks, it's working fine now with an other gamepad I've remapped :).

[BertL1005]

Hi there. I tested it with pi 3b+ with my external hard drive with all the roms and musik titles. The emulators are shown and the roms also because i can‘t play them. The roms are from the recalbox from the pi 3 b and the bios are also from the pi 3b. Is that not compatible with the data from the pi 3b ??
The title musik from my own does also not work only the musik on the internal drive .
The wifi setting keyboard does sometimes not shown.
Updates i don‘t now becaus i have edit the config data to the link from the forum.
greets robert

[kelv]

@bkg2k THX!!!

[olivierdroid92]

Hi to all the the team,
Please find my feedback :
The following games/systems have been tested
FBA0.2.97.43 : 1941 = OK
FBA0.2.97.43 : DINO = OK
MAME2013: cyvern = OK
MAME2013: ddonpach = OK
MEGADRIVE: Double Dragon = OK
NEOGEO3.3: mslug = OK
NES: Ice Climber (USA, Europe) = OK
NES: Kickle Cubicle (Europe) = OK
PSX: R-Type Delta (USA) = OK
SNES: R-Type III (Europe) = OK

All is OK, Srapper, SAVED, LOAD, RW, FW etc ...

But, I 've got some trooble to display keyboard when I want to put my name in NETPLAY setting.
So impossible to display keyboard.
No test performed on NETPLAY

Other points,

• 1st mapping issues with wired classic chine SNES pad. I dont kon why didnt works
• allmost impossible to affect "R2" pad after "L2" pad. . So perform all and back to choose correct "R2"

I will keep going to tests

[Substring]

@mikozzz said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

Hello ,

• PI3b+ , clean image installation, controller xbox360

1. The virtual keyboard is not visible

See the first post

2. Wifi problem : once the activated wifi can not connect via the network

I'll investigate

@BertL1005 there is no difference between a pi3 and pi3b+ from a recalbox point of view. So troms and everything else should work just as well as before.
Virtual keyboard : please read again the first post

@olivierdroid92 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

But, I 've got some trooble to display keyboard when I want to put my name in NETPLAY setting.
So impossible to display keyboard.

explained in the first post

No test performed on NETPLAY
Other points,

1st mapping issues with wired classic chine SNES pad. I dont kon why didnt works

I'm not sure to understannd what you mean

allmost impossible to affect "R2" pad after "L2" pad. . So perform all and back to choose correct "R2"

on which pad ?

TO EVERYONE: edited the first post so that the pad remapping necessity stands out better

[olivierdroid92]

@Substring
with a wired pad ps4 type when i configured the key, is was ok for "L2". I choose "L2".
But these selected key went affected to "L2" and "R2".
Lors de l'affection des touches sur une manette filaire USB de type PS4 : pour le bouton "L2". Je presse 1 clic sur "L2" mais ES affecte cette touche à "L2" et immédiatement apres fait la meme chose pour "R2". Je continue mon affectation des touches puis à la fin, corrige l'affection correcte.
Je ne sais pas si cela vient de ma manette ou si c'est lié à un timer ?

[Substring]

@olivierdroid92 using the dpad you can go back on keys assigned. Were the keys of BUTTON or AXIS type ?