Recalbox 18.06.27 is out!
-
Upgrading 50% still progressing!!
-
Good Job,
but afer upgraded I can't load my game save , does the location change for save folder ? (/share/save/fba_libtrero/) ?
-
@sebastien-brossard nope it didn't change, but the fba version changed
-
@Substring I'm having issues with the overclock settings
Overclocked as the following parameter doesn't launch emulationstation (all my previous versions of recalbox worked fine with these settings)
Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512avoid_safe_mode=1
kernel=zImage
NOOBS Auto-generated Settings:
hdmi_force_hotplug=1
arm_freq=1345
core_freq=500
sdram_freq=575
force_turbo=0
over_voltage=4
over_voltage_sdram_p=6
over_voltage_sdram_i=4
over_voltage_sdram_c=4
gpu_freq=500
sdram_schmoo=0x02000020
v3d_freq=500
h264_freq=333
gpu_mem=256Overclocked as follows, works fine but after playing dreamcast for 5 minutes and coming back to emulationstation crashes
It also crash after getting into netplay and doing hash configuration.
Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512avoid_safe_mode=1
kernel=zImage
NOOBS Auto-generated Settings:
hdmi_force_hotplug=1
arm_freq=1335
core_freq=500
sdram_freq=575
force_turbo=0
over_voltage=4
over_voltage_sdram_p=6
over_voltage_sdram_i=4
over_voltage_sdram_c=4
gpu_freq=500
sdram_schmoo=0x02000020
v3d_freq=500
h264_freq=333
gpu_mem=256I'm wondering if emulationstation update is too heavy...
-
@kelv I never ever overclock my pi
-
Il y a une nouvelle version mame ?
Je prépare déjà les roms fba en 0.2.97.43 mais pour mame faut prévoir un changement ?
Merci. -
@reda_zin la version mame est la même, c'est le set fba qu'il faut mettre à jour
-
@gaetan merci ️
-
J en profite pendant que vous parlez des romsets, le gamelist a t il besoin d être mis à jour lui aussi ? J ai lu qq part que ce n est pas obligatoire pour l arcade mais vu qu on se base sur le hash...
-
@murdock il ne me semble pas que le gamelist doit être changé, je n'ai jamais dû y toucher suite à une maj.
-
@Substring I have blank screen with music (so it's loading the rom) in this update at N64 using muplen64plus with Rice with any game. I change the following video setting and no success
N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
n64.videomode=DMT 4 HDMI
I also tested with auto DMT 4 HDMI with no success. As release notes state that there are changes.
With other cores work fine except RICE
I created two support files
https://file.ac/7Dfj66OHvHs/ during gameplay
https://file.ac/dJaeuB5rrBk/ after gameplayTHX
-
@substring said in Recalbox 18.06.27 is out!:
@sebastien-brossard nope it didn't change, but the fba version changed
in last version 18-06-27 ? nothing in changelog ?
-
@voljega b*mped to .43 in 18-06-27 yes. Would i have forgotten to write it explicitely in the changelog ? It says at least "all libretro cores b*mped"
-
@kelv which screen are you using ?
-
@substring said in Recalbox 18.06.27 is out!:
@voljega b*mped to .43 in 18-06-27 yes. Would i have forgotten to write it explicitely in the changelog ? It says at least "all libretro cores b*mped"
Yes and also afaics there is not dat in fba_libretro folder for 43 version ?
-
@voljega there is
-
Bonsoir. C’est mon premier message ici. Jusque là je me suis plutôt débrouillé tout seul mais là j’ai un souci avec cette dernière maj. Celle-ci reste bloquée à 63% et cela par deux fois. Une idée d’où cela peut venir ? Merci d’avance.
-
@flavest à quel moment 63% ? Sous es ou au reboot après ?
-
@murdock pas de hash sur les systèmes arcade
-
Hello, il semblerait que l'image pour pi3 soit une image pour x86_64 (même CRC, même contenu).