Error during the installation of Recalbox on Raspberry Pi 3

[MikołajHenza]

Hi,

When I try to install the soft on my Raspberry, I see this communicat:

I tried everything I know - renaming the SD card (BOOT), substitiuting the card to other. Please help me with it

[OyyoDams]

@mikołajhenza Hi,

This seems to be the Noobs install. Please try the direct install from our website.
https://archive.recalbox.com/

[MikołajHenza]

Hi @OyyoDams

I tried this from the beginning but installing image on my disk unfortunetlly doesn't work. I only copied files like this:

Do you think I need to install the NOOBs?

[OyyoDams]

@mikołajhenza Please follow the recommended method: use Etcher to write the image from our website on your SD card.

[MikołajHenza]

@oyyodams I was doing that every time but it doesn't work for me

[OyyoDams]

@mikołajhenza what do you mean by "it doesn't work" ? Can you give more details ?

[MikołajHenza]

@oyyodams It simply doesn't work. There isn't any signal on the monitor and only red light works.

[OyyoDams]

@mikołajhenza what is your SD card manufacturer ?

[MikołajHenza]

@oyyodams I use two cards - first is SanDisk 16GB MicroSD HCi (Class 10 which has installed Rasbian, it's from https://botland.com.pl/karty-pamieci-raspberry-pi/8848-karta-pamieci-microsd-16gb-40mbs-klasa-10-system-noobs-dla-raspberry-pi.html) and second is Kingston C32G. I tried to do that on both of them and they are FAT32.

[OyyoDams]

@mikołajhenza ok forget the Kingston. The Sandisk should work, maybe you should re-download the image from our website.

Etcher will format the SD card, so I don't care if it's FAT32 or NTFS before

[MikołajHenza]

@oyyodams I did it on this card few times... It doesn't work, i used Etcher and Win32DiskImager

[OyyoDams]

@mikołajhenza so it seems you have bad luck with both SD cards... With noobs or direct image... I can only advise you to buy another good SD card (Sandisk class 10 are the best ones)

[MikołajHenza]

@oyyodams But why on YouTube tutorials they always show to copy files to he SD card like me.

[OyyoDams]

@mikołajhenza these are old tutorials.

This is the up to date (in french): https://www.youtube.com/watch?v=1UBH4S6kG80

[MikołajHenza]

@oyyodams Can you see that is everything OK with my card?