Bild auf 4/3 umstellen

acidburn · 1 Nov 2017, 10:30

Hallo Hab einen Monitor 4/3 angeschlossen über ein HDMI auf DVI kabel leider haut das mit dem Bild nicht hin bekomme nur ein Teil vom Bild und einen Strich an der seite wo ca.:10cm Bild Fehlt. Wo kann ich das Bild umstellen hab die Forum suche genutz und leider nix gefunden.

Dragu · 1 Nov 2017, 11:26

@acidburn
Ich nehme an, du hast die entsprechenden Einträge in config.txt geändert ?

 #hdmi_drive=2
 
#hdmi_force_hotplug=1

Das sollte an sich alles sein. Ich habe im Bartop auch einen 4:3 und die Darstellung ist wie sie sein sollte. Hast du andere Werte in recalbox.conf verändert ?
Wenn nein, sehe ich die Ursache nur in deinem Kabel oder deinem Bildschirm.

acidburn · 1 Nov 2017, 11:46

in der conf finde ich die Einstellungen nicht schaut so bei mir aus.

 # System Variable
# You can configure your recalbox from here
# To set a variable, remove the first ; on the line
 
# NOTE ON CEC FOR REMOTES
# you've to plug the ODROID XU4 on the DVI of your tv
# this is a limitation of the EXYNOS libcec adapter
 
 
# ------------ A - System Options ----------- #
#    Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=WITTYPI             # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
;system.power.switch=PIN56ONOFF          # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH           # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET    # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
 
## Recalbox Manager (http manager)
system.manager.enabled=1
## 1 or 2, depending on the manager version you wish
system.manager.version=2
 
## Recalbox security
# enforce security
#   samba password required
#   disable virtual gamepads
system.security.enabled=0
 
## Recalbox API (REST)
system.api.enabled=1
 
## EmulationStation
### menu style
### default -> default all options menu
### none -> no menu except the game search menu
### bartop -> less menu, only needed for bartops
emulationstation.menu=default
### Select a system to show on boot (use rom directory name) (string)
emulationstation.selectedsystem=snes
### Show the gamelist of the first or selected system on boot (0,1)
emulationstation.bootongamelist=1
### Disable system view ES will boot and show ONLY the first or selected system (0,1)
emulationstation.hidesystemview=0
### Pa&ast;&ast;e Gamelists only. Show only games listed in gamelist.xml files (0,1)
emulationstation.gamelistonly=0
### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
emulationstation.forcebasicgamelistview=0
 
## Emulator special keys
## default -> default all special keys
## nomenu -> cannot popup the emulator menu
## none -> no special keys in emulators
system.emulators.specialkeys=default
 
## Show or hide kodi in emulationstation (0,1)
kodi.enabled=0
## Start kodi at launch (0,1)
kodi.atstartup=0
## set x button shortcut (0,1)
kodi.xbutton=0
 
## Kodi can wait for a network component before starting
## waithost is the ip or hostname that must answer to a ping to validate the availability
## waittime is the maximum time waited when kodi boots
## if waitmode is required, kodi will not start if the component is not available
## if waitmode is wish, kodi will start if the component is not available
## if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50
 
# ------------ B - Network ------------ #
## Set system hostname
system.hostname=RECALBOX
## Activate wifi (0,1)
wifi.enabled=0
## Wifi SSID (string)
;wifi.ssid=new ssid
## Wifi KEY (string)
## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
## Escape your special chars (# ; $) with a backslash : $ => \$
;wifi.key=new key
 
# secondary wifi (not configurable via the user interface)
;wifi2.ssid=new ssid
;wifi2.key=new key
 
# third wifi (not configurable via the user interface)
;wifi3.ssid=new ssid
;wifi3.key=new key
 
## Samba share
system.samba.enabled=1
### Virtual Gamepads
system.virtual-gamepads.enabled=1
### SSH
system.ssh.enabled=1
 
# ------------ C - Audio ------------ #
## Set the audio device (auto, hdmi, jack)
audio.device=auto
## Set system volume (0..100)
audio.volume=0
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=1
 
 
 
# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1
 
 
## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose a driver between bluez, official and shanwan
## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
## official -> sixad drivers, support official and gasia sisaxis
## shanwan -> shanwan drivers, support official and shanwan sisaxis
controllers.ps3.driver=bluez
 
 
# ------------ D2 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2
 
 
## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1
 
## Gamecon controllers
## Enable gamecon controllers, for nes, snes psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1
 
## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1
 
 
 
# ------------ F - Language and keyboard ------------ #
## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=de_DE
## set the keyboard layout (fr,en,de,us,es)
system.kblayout=de
## Set you local time
## Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris
 
 
 
# ------------ G - UPDATES ------------ #
## Automatically check for updates at start (0,1)
updates.enabled=1
# Update type : default to stable
updates.type=stable
 
 
# ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
## The global value will be used for all emulators, except if the value
## is redefined in the emulator
 
## Set game resolution for emulators
## select your mode from the command : tvservice -m [MODE]
## CEA 5 HDMI : 1920x1080 @ 60Hz 4:3, clock:74MHz interlaced 
## CEA 4 HDMI : 1280x720 @ 60Hz 4:3, clock:74MHz progressive
## use 'default' for using the default resolution
## (string)
global.videomode=CEA 1 HDMI
 
## Shader set 
## Automatically select shaders for all systems
## (none, retro, scanlines)
global.shaderset=scanlines
 
## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=1
 
## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=
 
## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto
 
## Set smooth for all emulators (0,1)
global.smooth=1
 
## Set rewind for all emulators (0,1)
global.rewind=1
 
## Set autosave/load savestate for all emulators (0,1)
global.autosave=1
 
## Enable retroarchievements (0,1)
## Set your www.retroachievements.org username/password
## Escape your special chars (# ; $) with a backslash : $ => \$
global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.username=
global.retroachievements.password=
 
## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=auto
 
## If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg
 
# ------------ I - EMULATORS CHOICES ----------- #
## You can override the global configuration here
## Here is the snes example
;snes.videomode=CEA 4 HDMI
snes.core=snes9x_next
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0
## If you do not want recalboxOS to generate the configuration for the emulator : 
;snes.configfile=/path/to/my/configfile.cfg
 
## Default cores for Odroid XU4
snes.core=snes9x_next
gba.core=mgba
mame.core=mame078
nes.core=fceunext
n64.core=glide64mk2
 
## NeoGeo emulator 
## You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
neogeo.core=fba
 
## Configurations generated by Recalbox
 
system.kblayout=de
dreamcast.autosave=0
dreamcast.rewind=0
dreamcast.smooth=0
dreamcast.ratio=4/3

abunille · 1 Nov 2017, 12:10

@acidburn

Hi,

wie @Dragu bereits geschrieben, befinden sich diese Einträge in der config.txtund nicht in der recalbox.conf.

https://github.com/recalbox/recalbox-os/wiki/Ändern-der-config.txt-Datei-%28DE%29

Ich hoffe der wiki Eintrag ist noch aktuell in Bezug auf 4.1

acidburn · 1 Nov 2017, 18:44

@abunille hi also beim pie hats geklappt beim xu4 bekomme ich das nicht hin. habs beim Pie mit Noobs

Schliesse eine USB-Tastatur an und drücke die Umschalttaste während recalbox startet, um so in das Recovery-Menü zu gelangen. Anschließend drücke die Taste „E“ für das Einstellungs-Menü und nimm die Änderungen vor.

weiß einer wie das beim XU4 funktioniert?

abunille · 1 Nov 2017, 18:51

@acidburn

diese Methode habe ich ehrlich gesagt noch nie benutzt.
Wenn ich die config.txt ändern möchte (auch eher selten), habe ich die SD Karte in meinen Mac gesteckt und dann mit einem Texteditor geändert.

EDIT:
Das geht ja wegen read-only bestimmt nicht, da hatte ich wohl einen Gedankenfehler.
Was ist mit der ssh Option, getestet?

Dragu · 1 Nov 2017, 19:09

@acidburn
Normalerweise mit F4 aus der ES, dann Alt+F2, login mit Name : root Passwort : recalboxroot, cd /,"mount -o remount, rw /boot", cd boot, nano config.txt, wenn geändert Ctrl+X, Yes, reboot.

acidburn · 1 Nov 2017, 19:14

habs mit putty versucht hab alles geändert will aber immer noch nicht.![Bild Text]( Bild Link)

acidburn · 1 Nov 2017, 19:15

mit F4 aus dem ES hängt er sich auf.

Dragu · 1 Nov 2017, 19:47

Aha. Ich hatte übersehen dass du zu den Odroid Testkarnikel gehörst.
Da können nur @substring oder @rockaddicted helfen.

Substring · 1 Nov 2017, 19:59

i can't help in german :s

Dragu · 1 Nov 2017, 20:10

@Substring
I can translate. He has an Odroid XU4 and black screen with hdmi to dvi cable.
Ok, half black screen.
I told him the usual modifications in config.txt. By the way F4 out from ES is not functioning with this board.
And seems also that the usual modifications in config.txt have no effect.

Substring · 3 Nov 2017, 23:55

@acidburn
You need to edit /boot/boot.ini the config.txt is a pi only file

beda · 20 Dec 2017, 22:58

@acidburn
Hallo, ich habe das gleiche monitor Problem. Das Bild der Spiele ist sehr unterschiedlich und meist zu klein. Ich brauche eine Art Anleitung für die Umstellung der config.txt Datei. Wo finde ich die? Was muss ich wie umstellen? Hat es bei dir funktioniert? LG

Dragu · 20 Dec 2017, 23:26

@beda
Sag vielleicht zuerst noch, welche CPU PI? oder Odroid XXX ?
Dann, wie die Verbindung zum Monitor ist, hdmi-hdmi, hdmi-dvi oder hdmi-vga oder ?
Das sind wichtige Daten bevore man sich ein Bild machen kann.

Ronny · 21 Dec 2017, 06:59

Und vorallem wo sind die Spiele zu klein?
N64 ist sehr klein...Mame ist normal, Nes und Snes ist auch normal... Dreamcast glaube ich auch relativ klein.

Bild auf 4/3 umstellen

Want to support us ?

87
Online

98.4k
Users

28.0k
Topics

187.0k
Posts

	# System Variable
	# You can configure your recalbox from here
	# To set a variable, remove the first ; on the line

	# NOTE ON CEC FOR REMOTES
	# you've to plug the ODROID XU4 on the DVI of your tv
	# this is a limitation of the EXYNOS libcec adapter


	# ------------ A - System Options ----------- #
	# Uncomment the system.power.switch you use
	;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
	;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
	;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
	;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
	;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
	;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
	;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
	;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

	## Recalbox Manager (http manager)
	system.manager.enabled=1
	## 1 or 2, depending on the manager version you wish
	system.manager.version=2

	## Recalbox security
	# enforce security
	# samba password required
	# disable virtual gamepads
	system.security.enabled=0

	## Recalbox API (REST)
	system.api.enabled=1

	## EmulationStation
	### menu style
	### default -> default all options menu
	### none -> no menu except the game search menu
	### bartop -> less menu, only needed for bartops
	emulationstation.menu=default
	### Select a system to show on boot (use rom directory name) (string)
	emulationstation.selectedsystem=snes
	### Show the gamelist of the first or selected system on boot (0,1)
	emulationstation.bootongamelist=1
	### Disable system view ES will boot and show ONLY the first or selected system (0,1)
	emulationstation.hidesystemview=0
	### Pa&ast;&ast;e Gamelists only. Show only games listed in gamelist.xml files (0,1)
	emulationstation.gamelistonly=0
	### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
	emulationstation.forcebasicgamelistview=0

	## Emulator special keys
	## default -> default all special keys
	## nomenu -> cannot popup the emulator menu
	## none -> no special keys in emulators
	system.emulators.specialkeys=default

	## Show or hide kodi in emulationstation (0,1)
	kodi.enabled=0
	## Start kodi at launch (0,1)
	kodi.atstartup=0
	## set x button shortcut (0,1)
	kodi.xbutton=0

	## Kodi can wait for a network component before starting
	## waithost is the ip or hostname that must answer to a ping to validate the availability
	## waittime is the maximum time waited when kodi boots
	## if waitmode is required, kodi will not start if the component is not available
	## if waitmode is wish, kodi will start if the component is not available
	## if waitmode is not set or has another value, kodi will start immediately
	;kodi.network.waitmode=required
	;kodi.network.waittime=10
	;kodi.network.waithost=192.168.0.50

	# ------------ B - Network ------------ #
	## Set system hostname
	system.hostname=RECALBOX
	## Activate wifi (0,1)
	wifi.enabled=0
	## Wifi SSID (string)
	;wifi.ssid=new ssid
	## Wifi KEY (string)
	## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
	## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
	## Escape your special chars (# ; $) with a backslash : $ => \$
	;wifi.key=new key

	# secondary wifi (not configurable via the user interface)
	;wifi2.ssid=new ssid
	;wifi2.key=new key

	# third wifi (not configurable via the user interface)
	;wifi3.ssid=new ssid
	;wifi3.key=new key

	## Samba share
	system.samba.enabled=1
	### Virtual Gamepads
	system.virtual-gamepads.enabled=1
	### SSH
	system.ssh.enabled=1

	# ------------ C - Audio ------------ #
	## Set the audio device (auto, hdmi, jack)
	audio.device=auto
	## Set system volume (0..100)
	audio.volume=0
	## Enable or disable system sounds in ES (0,1)
	audio.bgmusic=1



	# -------------- D - Controllers ----------------- #
	# Enable support for standard bluetooth controllers
	controllers.bluetooth.enabled=1


	## Please enable only one of these
	# -------------- D1 - PS3 Controllers ------------ #
	##Enable PS3 controllers support
	controllers.ps3.enabled=1
	## Choose a driver between bluez, official and shanwan
	## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
	## official -> sixad drivers, support official and gasia sisaxis
	## shanwan -> shanwan drivers, support official and shanwan sisaxis
	controllers.ps3.driver=bluez


	# ------------ D2 - GPIO Controllers ------------ #
	## GPIO Controllers
	## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
	controllers.gpio.enabled=0
	## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
	controllers.gpio.args=map=1,2


	## DB9 Controllers
	## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
	controllers.db9.enabled=0
	## db9 arguments
	controllers.db9.args=map=1

	## Gamecon controllers
	## Enable gamecon controllers, for nes, snes psx (0,1)
	controllers.gamecon.enabled=0
	## gamecon_args
	controllers.gamecon.args=map=1

	## XGaming's XArcade Tankstik and other compatible devices
	controllers.xarcade.enabled=1



	# ------------ F - Language and keyboard ------------ #
	## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
	system.language=de_DE
	## set the keyboard layout (fr,en,de,us,es)
	system.kblayout=de
	## Set you local time
	## Select your timezone from : ls /usr/share/zoneinfo/ (string)
	;system.timezone=Europe/Paris



	# ------------ G - UPDATES ------------ #
	## Automatically check for updates at start (0,1)
	updates.enabled=1
	# Update type : default to stable
	updates.type=stable


	# ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
	## The global value will be used for all emulators, except if the value
	## is redefined in the emulator

	## Set game resolution for emulators
	## select your mode from the command : tvservice -m [MODE]
	## CEA 5 HDMI : 1920x1080 @ 60Hz 4:3, clock:74MHz interlaced
	## CEA 4 HDMI : 1280x720 @ 60Hz 4:3, clock:74MHz progressive
	## use 'default' for using the default resolution
	## (string)
	global.videomode=CEA 1 HDMI

	## Shader set
	## Automatically select shaders for all systems
	## (none, retro, scanlines)
	global.shaderset=scanlines

	## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
	global.integerscale=1

	## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
	global.shaders=

	## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
	global.ratio=auto

	## Set smooth for all emulators (0,1)
	global.smooth=1

	## Set rewind for all emulators (0,1)
	global.rewind=1

	## Set autosave/load savestate for all emulators (0,1)
	global.autosave=1

	## Enable retroarchievements (0,1)
	## Set your www.retroachievements.org username/password
	## Escape your special chars (# ; $) with a backslash : $ => \$
	global.retroachievements=0
	global.retroachievements.hardcore=0
	global.retroachievements.username=
	global.retroachievements.password=

	## Set retroarch input driver (auto, udev, sdl2)
	## If you don't have issues with your controllers, let auto
	global.inputdriver=auto

	## If you do not want recalboxOS to generate the configuration for all emulators (string)
	;global.configfile=/path/to/my/configfile.cfg

	# ------------ I - EMULATORS CHOICES ----------- #
	## You can override the global configuration here
	## Here is the snes example
	;snes.videomode=CEA 4 HDMI
	snes.core=snes9x_next
	;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
	;snes.ratio=16/9
	;snes.smooth=0
	;snes.rewind=1
	;snes.autosave=0
	;snes.emulator=libretro
	;snes.integerscale=0
	## If you do not want recalboxOS to generate the configuration for the emulator :
	;snes.configfile=/path/to/my/configfile.cfg

	## Default cores for Odroid XU4
	snes.core=snes9x_next
	gba.core=mgba
	mame.core=mame078
	nes.core=fceunext
	n64.core=glide64mk2

	## NeoGeo emulator
	## You can use pifba or a libretro core (fba2x,libretro)
	neogeo.emulator=libretro
	## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
	neogeo.core=fba

	## Configurations generated by Recalbox

	system.kblayout=de
	dreamcast.autosave=0
	dreamcast.rewind=0
	dreamcast.smooth=0
	dreamcast.ratio=4/3

Bild auf 4/3 umstellen

Want to support us ?

87Online

98.4kUsers

28.0kTopics

187.0kPosts

87
Online

98.4k
Users

28.0k
Topics

187.0k
Posts