TERIOS T3 of Gearbest NOT works, anyone with this pad?

[rockaddicted]

and if you set this driver in your recalbox.conf file :

## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=shanwan

official -> shanwan

Then follow the pairing instructions ?
https://github.com/recalbox/recalbox-os/wiki/Manual-(EN)#ps3controllers

[charlesmarried]

@rockaddicted

Hi, I have done what do you say and It does not work. Could be the dongle that id not supported by?

[acris]

@charlesmarried
in archive support only gamepad or you connected wireless keyboard ?

I need archive support with only dongle and gamepad

edit : your gamepad sent keyboard events, it s bad

https://github.com/recalbox/recalbox-os/wiki/Make-a-partition-writable-(EN)

you need to edit /etc/udev/rules.d/99-joysticks-exotics.rules

add this line

#TERIOS GAMEPAD
SUBSYSTEM=="input", ATTRS{name}=="HID 4555:1031", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"

SAVE AND REBOOT

Try to configure gamepad in Emulationstation Menu
if doesn't work, post a new archive support

[charlesmarried]

@acris said in TERIOS T3 of Gearbest NOT works, anyone with this pad?:

#TERIOS GAMEPAD
SUBSYSTEM=="input", ATTRS{name}=="HID 4555:1031", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"

All right, Im going to do it right now!

[charlesmarried]

@acris @rockaddicted @Substring

Well I have done everything and it still not working. Recalbox says that there is another gamepad recognised but the gamepad cannot find the dongle. Even, Recabolx crash, I can´t use the keyboard as normal and I have to power off the raspberry to reset. Here I upload another new support:

http://www99.zippyshare.com/v/8SeXAReV/file.html

Is a problem of the dongle? The gamepad works great with PC and Andorid. So, the gamepad itseilf is ok, even the dongle in Steam is fully recognized.

Thank you so much... it is a nightmare to config this pad

[acris]

@charlesmarried
recalbox doesn't work with gamepad reconized like keyboard
you bought a bad gamepad

@substring peut pas voir la derniere archive si tu peux checker et voir peut etre un usbhid pour le dongle

[Substring]

@charlesmarried your pad works as a keyboard, not as a joypad. It doesn't send any event corresponding to a joypad. I have no idea if you can configure the keypresses, but the only trick (using the xarcade2jstick driver) could not even work unless your pad is configured like the mame inputs (or can be configured in such way).

[charlesmarried]

@substring

But your actual controller is a Shanwan, no? Like mine. Any other idea?

[Substring]

@charlesmarried the shell is almost exactly the same, but the software inside is totally different

[charlesmarried]

@substring

Where do you see that? In the recalbox support? What a pity

[charlesmarried]

I think I will give it up, I will shell it and buy other... Terrible.

[rockaddicted]

I don't find your gamepad on gearbest, the only one I found is a bluetooth gamepad without a dedicated dongle.
http://www.gearbest.com/video-game/pp_197587.html

[charlesmarried]

@rockaddicted

This is the gamepad I bought, and the dongle is this:

https://goo.gl/3LpQXr

That is for S3, T3 and G3 gamepads. The dongle on PC is recognised as a PS3/PC gamepad:

[charlesmarried]

So guys, before assuming that i lost my money in this gamepad, is there any possible option o it is the end?

[acris]

Did you buy the dongle separately or was it delivered with the controller?
But yes wrong gmaepad please check wiki for best compatibility

[charlesmarried]

@acris

I bought the dongle separately.

Ok, acris, thank you

[charlesmarried]

I try this ISO with RECALBOX 4.1 and the gamepad with the official dongle works perfect...

** Link removed by moderation **

[rockaddicted]

@charlesmarried this iso includes games I remove the link. Please respect forum's rules.

So your gamepad will work on stock 4.1 release.