N64 Pi3B 4.0.2 black screen

[abunille]

@rubem-moura

Have you setup the Joysticks on UI correctly (The "L" Buttons also)?

[Rubem Moura]

Hi @abunille
Thanks for your reply.

I used the menu to configure the joysticks (Controller Settings-> Configure a Controller).
In this menu, he asks me to choose the L1 R1 L2 R2 buttons, and i set according to ps2 controller model (the controller of the pictures above).

I don't know if this procedure is correct to n64.

[abunille]

@rubem-moura

Ok, the joystick configuration seems ok.
As i can read below, you have already change the videomodes.
https://github.com/recalbox/recalbox-os/wiki/N64-%3A-return-to-ES-%28EN%29

With other systems the games are starting and the joysticks works in recalbox?
Have you checked a game without plug in a joystick (only with keyboard)?

The only problems i know are

• wrong videomode
• joystick not configured ("L") or is not supported
• bad roms

[Rubem Moura]

Hi @abunille ,

Yes, i tried to do like explained in this tutorial (https://github.com/recalbox/recalbox-os/wiki/N64-%3A-return-to-ES-(EN)), but still don't works.

With other systems the games are starting and the joysticks works in recalbox?

• With all others systems (NeoGeo, MegaDrive, SNES, PS1...), i can play with this two joysticks, without any problem.

Have you checked a game without plug in a joystick (only with keyboard)?

• Yes, i tried do this after see in other topic, but still don't works

I will put here my configuration file and recalbox.log.

[abunille]

@rubem-moura

strange.
The rom extensions are .n64 .N64 .z64 .Z64 .v64 .V64, right? Not .zip

For your configuration and log, please have a look here:
https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-%28EN%29

[Rubem Moura]

@abunille

Yes, my roms aren't .zip.
And i checked with toll64 application, who my roms are byteswapped.

[rockaddicted]

Did you check if your screen is compatible with the default N64 video mod ?

[Rubem Moura]

Hi @rockaddicted ,

When i run the comand tvservice -m DMT and CEA, the output contains the resolution 640x480 like an option. I tried use them but still don't works.

Here my log file with same information when i try run n64:

[rockaddicted]

ok so, upload support archive, I'll check your setup (look @abunille post).
Then log on ssh, /etc/init.d/S31emulationstation stop then /etc/init.d/S31emulationstation start. Now keep this ssh window open, start a N64 game and check in this ssh window if an error is displayed.

[Rubem Moura]

@abunille ,

i can't get the recalbox-support.sh file now (i'm working), but i will put this file here later.

[Rubem Moura]

Ok @rockaddicted ,

I will do this later (i'm working) and will put the result here.
Thanks!

[Rubem Moura]

Hi guys!

Ok @abunille and @rockaddicted , i do a clear installation to undo the old any changes.

After this, i configured again the joystick (Clone), and put an video here to you check if is correct. Youtube Video

I put the n64 roms into the corresponding folder. All roms in format .n64 and byteswapped (checked with tool64 application).

So, i tried start n64, without any modifications in recalbox.conf file and still don't works.

Ok, i open the recalbox.conf file, and i compare with other recalbox.conf file from the GitHub. In my file, was missing an text, who defines some configuration to n64:

So, i copy and paste this stretch to my file, and tried start n64, but still don't works.

I tried apply the modification about the video mode (link), changing n64.videomode=DMT 4 HDMI to n64.videomode=CEA 1 HDMI , but still don't works.

This is my output from tvservice command:

After this, i do the processes to get the recalbox support file, described in this link. And here is my support file: GoogleDrive File

So, i get the log via ssh with the commands /etc/init.d/S31emulationstation stop and /etc/init.d/S31emulationstation start, and here is the output after i tried start a n64 game:

Ok guys!! Please help me!

[Rubem Moura]

Just remembering: Now, the recalbox version is 4.0.1, and my rasp is pi2.

[abunille]

@rubem-moura

we must wait for @rockaddicted to read the support file, he is more a pro than me

But what i see in your log is (i hope i am right):

• Machine model: Raspberry Pi Model B Plus Rev 1.2 (seems to be a pi1)
• Load BCM2835 DMA engine driver (also a sign for pi1, pi2 has BCM2836)
• hw perfevents: enabled with armv6_1176 PMU driver (also, pi2 has Cortex-A7)

And this means it is a pi1 and not pi2.
And how i know a pi1 is not supported with n64.

But how i write above, better to wait for @rockaddicted

[rockaddicted]

I checked your log and you don't have a rpi2 but a rpi1 that is not powerful enough to emulate N64, so this system is not available on this rpi.

[Rubem Moura]

@abunille @rockaddicted

Thanks for your help guys.
I will solve this problem.

Best regards!