Just remembering: Now, the recalbox version is 4.0.1, and my rasp is pi2.

@abunille @rockaddicted

Thanks for your help guys.
I will solve this problem.

Best regards!

Just remembering: Now, the recalbox version is 4.0.1, and my rasp is pi2.

Hi guys!

Ok @abunille and @rockaddicted , i do a clear installation to undo the old any changes.

After this, i configured again the joystick (Clone), and put an video here to you check if is correct. Youtube Video

I put the n64 roms into the corresponding folder. All roms in format .n64 and byteswapped (checked with tool64 application).

So, i tried start n64, without any modifications in recalbox.conf file and still don't works.

Ok, i open the recalbox.conf file, and i compare with other recalbox.conf file from the GitHub. In my file, was missing an text, who defines some configuration to n64:

So, i copy and paste this stretch to my file, and tried start n64, but still don't works.

I tried apply the modification about the video mode (link), changing n64.videomode=DMT 4 HDMI to n64.videomode=CEA 1 HDMI , but still don't works.

This is my output from tvservice command:

After this, i do the processes to get the recalbox support file, described in this link. And here is my support file: GoogleDrive File

So, i get the log via ssh with the commands /etc/init.d/S31emulationstation stop and /etc/init.d/S31emulationstation start, and here is the output after i tried start a n64 game:

Ok guys!! Please help me!

Ok @rockaddicted ,

I will do this later (i'm working) and will put the result here.
Thanks!

@abunille ,

i can't get the recalbox-support.sh file now (i'm working), but i will put this file here later.

Hi @rockaddicted ,

When i run the comand tvservice -m DMT and CEA, the output contains the resolution 640x480 like an option. I tried use them but still don't works.

Here my log file with same information when i try run n64:

@abunille

Yes, my roms aren't .zip.
And i checked with toll64 application, who my roms are byteswapped.

Hi @abunille ,

Yes, i tried to do like explained in this tutorial (https://github.com/recalbox/recalbox-os/wiki/N64-%3A-return-to-ES-(EN)), but still don't works.

With other systems the games are starting and the joysticks works in recalbox?

• With all others systems (NeoGeo, MegaDrive, SNES, PS1...), i can play with this two joysticks, without any problem.

Have you checked a game without plug in a joystick (only with keyboard)?

• Yes, i tried do this after see in other topic, but still don't works

I will put here my configuration file and recalbox.log.

Hi @abunille
Thanks for your reply.

I used the menu to configure the joysticks (Controller Settings-> Configure a Controller).
In this menu, he asks me to choose the L1 R1 L2 R2 buttons, and i set according to ps2 controller model (the controller of the pictures above).

I don't know if this procedure is correct to n64.

Hi, guys.

I have the same problem and the changes n64.videomode=DMT 4 HDMI to n64.videomode=CEA 1 HDMI doesn't worked for me.

I have tried to do the n64 work in my rasp2 since three weeks ago, and I don't have success. I searched in the forum and tried all supposed solutions, but still don't work.

I saw in the forum who the problem may be due to the byte format of the roms, the screen resolution, and the configuration of the joysticks.

So, I kept trying.

• My roms of n64 is Byteswapped;
• I tried changes the n64.videomode to all option who have resolution 640x480 from my TV (i tried also in a monitor);
• I tried with two differents controllers (ps2 format);
• Controllers model:
  

But still, the n64 returns to emulation station after the black screen.

Please, help me, guys.
I can try with a clean installation.