[SOFT] dynquee: dynamic marquee for Recalbox

[leew]

@poppadum
I have uploaded some images with the correct aspect and i still see black bars top and bottom. with a very o

running the command fbset comes back with this

Not sure where to go from here?? Any help greatly received.

[leew]

@poppadum ok so some more playing

by un hashing this line i got the resolution to show 1920x360 but it now pushes the image to the top of the screen
framebuffer_resolution_cmd = /usr/sbin/fbset -g ${global:marquee_width} ${global:marquee_height} ${global:marquee_width} ${global:marquee_height} 16

this is how a 1920x360 image is showing

frustration is that the start up video is running full screen on this screen.

[poppadum]

@leew said in [SOFT] dynquee: dynamic marquee for Recalbox:

@poppadum ok so some more playing

by un hashing this line i got the resolution to show 1920x360 but it now pushes the image to the top of the screen
framebuffer_resolution_cmd = /usr/sbin/fbset -g ${global:marquee_width} ${global:marquee_height} ${global:marquee_width} ${global:marquee_height} 16

That looks good - I get exactly the same output.

this is how a 1920x360 image is showing

Bizarre: that looks like it's taking up exactly one-third of the height which is what it would do if it thought the resolution was 1920x1080.

Could you try stopping dynquee with
/etc/init.d/S32dynquee stop
double check your framebuffer resolution with fbset
then manually displaying that image with
fbv2 path/to/your/image

You could also try with another 1920x360 image such as:
https://virginia.byf.org/wp-content/uploads/2017/03/pexels-photo-358483-1920x360.jpg

[leew]

@poppadum Thanks for your help on this. it seems to be an issue with the driver board for the screen. purchased another board and this seems to fix the image size issue but has created a white line down the middle of the screen. It seems i have two faulty boards! Have emailed the manufacturer to see if they can help.

[daniel6984]

@poppadum bonjour,

Sur la version 9.1 de recalbox , il y a la possibilité d'afficher des systèmes virtuels par genre en passant par les paramètres avancés\systèmes virtuels\systèmes virtuels par genre.

Quand je choisis par exemple le systèmes virtuels shoot em up, il apparait bien sur le menu de navigation mais j'arrive pas a afficher le marquée, comment dois-je renommé l'image .logo.png pour qu'il apparaissent ?
Merci par avance.
Cordialement

[poppadum]

@daniel6984 said in [SOFT] dynquee: dynamic marquee for Recalbox:

@poppadum Quand je choisis par exemple le systèmes virtuels shoot em up, il apparait bien sur le menu de navigation mais j'arrive pas a afficher le marquée, comment dois-je renommé l'image .logo.png pour qu'il apparaissent ?

Il faut nommer les fichiers <SystemId>.<quelque-chose>.png/.jpg
par exemple: actionshootemup.01.png

Liste des SystemIds pour les systèmes virtuels:

favorites
lightgun
multiplayer
action
actionplatformer
actionplatformshooter
actionfirstpersonshooter
actionshootemup
actionshootwithgun
actionfighting
actionbeatemup
actionstealth
actionbattleroyale
actionrythm
adventure
adventuretext
adventuregraphics
adventurevisualnovels
adventureinteractivemovie
adventurerealtime3d
adventuresurvivalhorror
rpg
rpgaction
rpgmmo
rpgdungeoncrawler
rpgtactical
rpgjapanese
rpgfirstpersonpartybased
simulation
simulationbuildandmanagement
simulationlife
simulationfishandhunt
simulationvehicle
simulationscifi
strategy
strategy4x
strategyartillery
strategyautobattler
strategymoba
strategyrts
strategytbs
strategytowerdefense
strategywargame
sports
sportracing
sportsimulation
sportcompetitive
sportfight
pinball
board
casual
digitalcard
puzzleandlogic
party
trivia
casino
compilation
demoscene
educative

[daniel6984]

@poppadum said in [SOFT] dynquee: dynamic marquee for Recalbox:

actionshootemup

Merci infiniment je comprend pourquoi ça ne s'affichai pas , je mettais action-shootemup a la place de actionshootemup

[daniel6984]

@POPPADUM Bonjour,

J'ai une question pour un ami, il a un rpi4 avec un RGB DUAL qui ce branche via les GPIO, il est brancher en péritel sur une petite télévision crt 14 pouces d'une résolution de 320x240 fréquence 15khz, il a voulu tester les marquees sur un écran lcd brancher en hdmi , mais les images apparaisse que sur la télévision crt, avez une astuce pour faire apparaitre les images marquee sur le lcd ?
Je vous remercie

[poppadum]

@daniel6984 said in [SOFT] dynquee: dynamic marquee for Recalbox:

il a un rpi4 avec un RGB DUAL qui ce branche via les GPIO... il a voulu tester les marquees sur un écran lcd brancher en hdmi, mais les images apparaisse que sur la télévision crt

Pour le raspberry pi 4, les deux écrans HDMI partagent le framebuffer, mais il semble qu'avec un RGB Dual le framebuffer ne s'affiche que sur le CRT.

Pour Recalbox PC dynquee utilise mpv --screen=2 pour afficher les images sur l'écran 2. Pourrait-il tester si cela fonctionne avec:

mpv --screen=2 --loop <image.png>

[daniel6984]

@poppadum Bonjour,
merci beaucoup de nous avoir repondu.
Nous voulons tester la ligne que tu nous a donnée, nous somme que sur rpi4 , dans le .ini , ou faut-il insérer la ligne mpv --screen=2 --loop <image.png> ?
Merci encor pour ton aide

[poppadum]

@daniel6984 Pour tester c'est plus facile d'accéder au cli et d'entrer

mpv --screen=2 --loop /recalbox/share/dynquee/media/startup/startup.01.png

Ou modifiez dynquee.ini lignes 169-170:

viewer = /usr/bin/mpv
viewer_opts = --screen=2 --loop {file}

[daniel6984]

@poppadum Bonjour
Merci beaucoup pour l'aide ,
ont a essayer par le .ini, ont a bien l'image du startup sur l'écran lcd mais plus d'image sur le CRT et aucun mouvement d'image n'apparait quand ont va de droite a gauche, l'image startup reste fixe.

[poppadum]

@daniel6984 said in [SOFT] dynquee: dynamic marquee for Recalbox:

aucun mouvement d'image n'apparait quand ont va de droite a gauche, l'image startup reste fixe

J'ai oublié qu'il faut aussi modifier (dynquee.ini ligne 174):

terminate_viewer = yes

mais plus d'image sur le CRT

Tu vois rien sur le CRT, ni les images de marquee ni les jeux?

[daniel6984]

@poppadum Bonjour,
Avec la ligne terminate_viewer = yes, il y a bien l'image des marquees que sur le crt pendant le chargement du jeux, mais rien sur l'écran lcd

[Tuko]

@leew

Hi, I also had the same problem.
It seems that the ultra wide screen is not really 1920 x 360. I solved it by setting it to 1920 x 1080 by editing lines 14, 15 and 170

13  # marquee resolution: change to suit your marquee screen
14  marquee_width = 1920
15  marquee_height = 1080

168   # path to image viewer executable & options
169   viewer = /usr/bin/fbv2
170   viewer_opts = --noinfo --enlarge --ignore-aspect {file}

Let me know if you solve at least partially

[poppadum]

@daniel6984 said in [SOFT] dynquee: dynamic marquee for Recalbox:

Avec la ligne terminate_viewer = yes, il y a bien l'image des marquees que sur le crt pendant le chargement du jeux, mais rien sur l'écran lcd

Hmm

Et aussi rien sur l'écran lcd avec

viewer = /usr/bin/mpv
viewer_opts = --screen=1 --loop {file}

?

[toniosj]

@poppadum Awesome!!!

Where did you buy your LCD marquee? What dimensions?

[poppadum]

@toniosj It's from CaisonLCD in China - model number DV190FBM.

It's a 19.1" panel with resolution 1920x360
Dimensions are 116mm(L) x 87.3mm(W) x 19mm(H)

There are now quite a few different panels available on Amazon too.

[Colywobbles]

Can anyone help? I have installed via the easy option above and it seems everything is there however I am using a Pi4 with RBGpi on one setup and a Pi5 with RGBDual both running on Scart CRT TVs perfectly.
However no matter what I try I can not get any of my 3 marquee displays working.
The marquee picture does quickly flash up on the CRT then goes off as any game loads.
The 2nd display just reports no signal as does any display regardless if its a letterbox widescreen or full size 1080p one
It would make my year if this could be solved.
Thanks in advance Coly

[poppadum]

Hi @Colywobbles
I don't have either an RBGpi or RGBDual to test with but it's likely those are the reason it's not working as intended.

On a Pi 4/5 with 2 displays connected to the HDMI ports, both screens share a single framebuffer device. dynquee uses the fbv2 command to display an image on the framebuffer. This means marquee images are shown on both screens briefly when an emulator launches or exits. While a game emulator is running it writes directly to the first display so you see the game running on display 1 and the marquee image on display 2.

My guess is that the RGB devices are interfering somehow. To debug you could connect to your Recalbox via ssh and stop EmulationStation and dynquee by pasting in these commands:

es stop
/etc/init.d/S32dynquee stop

then test if you can get an image to display with
fbv2 /recalbox/share/dynquee/media/startup/startup.01.png

It could also be useful to run
ls -l /dev/fb*
and let me know what the result is.