Recalbox Forum

    • Register
    • Login
    • Search
    • Recent
    • Tags
    • recalbox.com
    • Gitlab repository
    • Documentation
    • Discord

    Probleme affichage ogst odroid n64 case (Odroid xu4)

    Recalbox Général
    ogst odroid case xu4
    7
    57
    7507
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Kairoslair 0
      Kairoslair 0 last edited by

      I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:

      ODROIDXU-UBOOT-CONFIG
      
      # U-Boot Parameters (DO NOT MODIFY)
      setenv version 4.14 
      setenv zimage boot/linux
      setenv fdtbin boot/exynos5422-odroidxu4.dtb
      setenv uInitrd boot/uInitrd
      
      # --- Screen Configuration for HDMI --- # 
      # ---------------------------------------
      # Uncomment only ONE line! Leave all commented for automatic selection.
      # Uncomment only the setenv line!
      # ---------------------------------------
      # ODROID-VU forced resolution
      # setenv videoconfig "video=HDMI-A-1:1280x800@60"
      # -----------------------------------------------
      # ODROID-VU forced EDID
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
      # -----------------------------------------------
      # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
      setenv videoconfig "video=HDMI-A-1:1920x1080@60"
      # -----------------------------------------------
      # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
      # -----------------------------------------------
      # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
      # setenv videoconfig "video=HDMI-A-1:1920x1080@50"
      # -----------------------------------------------
      # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
      # -----------------------------------------------
      # 1440x900 with monitor provided EDID information.
      # setenv videoconfig "video=HDMI-A-1:1440x900@60"
      # -----------------------------------------------
      # 1440x900 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
      # -----------------------------------------------
      # 1280x1024 without monitor data using generic information
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
      # -----------------------------------------------
      # 1280x720 (720P) with monitor provided EDID information. (720p-edid)
      # setenv videoconfig "video=HDMI-A-1:1280x720@60"
      # -----------------------------------------------
      # 1280x720 (720P) without monitor data using generic information (720p-noedid)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
      # -----------------------------------------------
      # 1024x768 without monitor data using generic information
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
      # -----------------------------------------------
      # 1024x600 without monitor data using generic information (ODROID VU7+)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
      # -----------------------------------------------
      # 800x600 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
      # -----------------------------------------------
      # 800x480 without monitor data using generic information (ODROID 7")
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
      # -----------------------------------------------
      # 720x576 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
      # -----------------------------------------------
      # 720x480 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
      # -----------------------------------------------
      # 640x480 without monitor data using generic information
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
      
      
      # --- HDMI / DVI Mode Selection ---
      # ------------------------------------------
      # - HDMI Mode
      setenv vout "hdmi"
      # - DVI Mode (disables sound over HDMI as per DVI compat)
      # setenv vout "dvi"
      
      
      # --- CPU Governor Setup ---
      # Uncomment only one line. New governor is set after 90secs after boot.
      # ------------------------------------------
      # - Performance (Keep all the CPU's at Maximum frequency)
      setenv governor "performance"
      # ------------------------------------------
      # - Ondemand
      # setenv governor "ondemand"
      # ------------------------------------------
      # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
      # setenv governor "interactive"
      # ------------------------------------------
      # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
      # setenv governor "conservative"
      # ------------------------------------------
      # - Powersave (Keeps the CPU's to the lowest possible temps)
      # setenv governor "powersave"
      
      
      # --- HDMI CEC Configuration ---
      # ------------------------------------------
      setenv cecenable "false" # false or true
      # set to true to enable HDMI CEC
      
      #------------------------------------------------------------------------------
      #
      # HDMI Hot Plug detection
      #
      #------------------------------------------------------------------------------
      #
      # Forces the HDMI subsystem to ignore the check if the cable is connected or 
      # not.
      # false : disable the detection and force it as connected.
      # true : let cable, board and monitor decide the connection status.
      # 
      # default: true
      # 
      #------------------------------------------------------------------------------
      setenv HPD "false"
      setenv hdmi_phy_control "HPD=${HPD}  vout=${vout}"
      if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi 
      setenv dtb_addr_r "0x44000000"
      setenv dtbo_addr_r "0x48000000"
      setenv zimage_addr_r 0x40008000
      setenv uInitrd_addr_r 0x42000000
      setenv fdtbin_addr_r 0x44000000
      setenv config_addr_r "0x4B000000"
      
      setenv fdt_high "0xffffffff"
      
      # load config.ini
      load mmc 0:1 ${config_addr_r} config.ini \
          && ini generic ${config_addr_r}
      
      # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633)
      setenv ddr_freq 933
      
      # set DDR frequency
      dmc ${ddr_freq}
      
      # Default boot arguments
      setenv bootrootfs "label=RECALBOX"
      setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0"
      
      # boot commands
      fatload mmc 0:1 ${zimage_addr_r} ${zimage}
      fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd}
      fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin}
      
      fdt addr ${dtb_addr_r}
      if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
      
      setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}"
      
      # load overlays from config.ini
      if test "x${overlay_profile}" != "x"; then
          ini overlay_${overlay_profile} ${config_addr_r}
      fi
      
      if test "x{overlays}" != "x"; then
          fdt resize ${overlay_resize}
          for overlay in ${overlays}; do
              load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \
                  && fdt apply ${dtbo_addr_r}
          done
      fi
      
      bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}
      
      davidb2111 1 Reply Last reply Reply Quote 1
      • davidb2111
        davidb2111 Staff @cedric-debuiselle last edited by

        @cedric-debuiselle
        Si tu as le temps, pourrais tu tester avec le boot.ini de @Kairoslair-0 ?

        1 Reply Last reply Reply Quote 0
        • davidb2111
          davidb2111 Staff @Kairoslair 0 last edited by

          @kairoslair-0 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

          I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:

          ODROIDXU-UBOOT-CONFIG
          
          # U-Boot Parameters (DO NOT MODIFY)
          setenv version 4.14 
          setenv zimage boot/linux
          setenv fdtbin boot/exynos5422-odroidxu4.dtb
          setenv uInitrd boot/uInitrd
          
          # --- Screen Configuration for HDMI --- # 
          # ---------------------------------------
          # Uncomment only ONE line! Leave all commented for automatic selection.
          # Uncomment only the setenv line!
          # ---------------------------------------
          # ODROID-VU forced resolution
          # setenv videoconfig "video=HDMI-A-1:1280x800@60"
          # -----------------------------------------------
          # ODROID-VU forced EDID
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
          # -----------------------------------------------
          # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
          setenv videoconfig "video=HDMI-A-1:1920x1080@60"
          # -----------------------------------------------
          # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
          # -----------------------------------------------
          # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
          # setenv videoconfig "video=HDMI-A-1:1920x1080@50"
          # -----------------------------------------------
          # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
          # -----------------------------------------------
          # 1440x900 with monitor provided EDID information.
          # setenv videoconfig "video=HDMI-A-1:1440x900@60"
          # -----------------------------------------------
          # 1440x900 without monitor data using generic information 
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
          # -----------------------------------------------
          # 1280x1024 without monitor data using generic information
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
          # -----------------------------------------------
          # 1280x720 (720P) with monitor provided EDID information. (720p-edid)
          # setenv videoconfig "video=HDMI-A-1:1280x720@60"
          # -----------------------------------------------
          # 1280x720 (720P) without monitor data using generic information (720p-noedid)
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
          # -----------------------------------------------
          # 1024x768 without monitor data using generic information
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
          # -----------------------------------------------
          # 1024x600 without monitor data using generic information (ODROID VU7+)
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
          # -----------------------------------------------
          # 800x600 without monitor data using generic information 
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
          # -----------------------------------------------
          # 800x480 without monitor data using generic information (ODROID 7")
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
          # -----------------------------------------------
          # 720x576 without monitor data using generic information 
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
          # -----------------------------------------------
          # 720x480 without monitor data using generic information 
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
          # -----------------------------------------------
          # 640x480 without monitor data using generic information
          # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
          
          
          # --- HDMI / DVI Mode Selection ---
          # ------------------------------------------
          # - HDMI Mode
          setenv vout "hdmi"
          # - DVI Mode (disables sound over HDMI as per DVI compat)
          # setenv vout "dvi"
          
          
          # --- CPU Governor Setup ---
          # Uncomment only one line. New governor is set after 90secs after boot.
          # ------------------------------------------
          # - Performance (Keep all the CPU's at Maximum frequency)
          setenv governor "performance"
          # ------------------------------------------
          # - Ondemand
          # setenv governor "ondemand"
          # ------------------------------------------
          # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
          # setenv governor "interactive"
          # ------------------------------------------
          # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
          # setenv governor "conservative"
          # ------------------------------------------
          # - Powersave (Keeps the CPU's to the lowest possible temps)
          # setenv governor "powersave"
          
          
          # --- HDMI CEC Configuration ---
          # ------------------------------------------
          setenv cecenable "false" # false or true
          # set to true to enable HDMI CEC
          
          #------------------------------------------------------------------------------
          #
          # HDMI Hot Plug detection
          #
          #------------------------------------------------------------------------------
          #
          # Forces the HDMI subsystem to ignore the check if the cable is connected or 
          # not.
          # false : disable the detection and force it as connected.
          # true : let cable, board and monitor decide the connection status.
          # 
          # default: true
          # 
          #------------------------------------------------------------------------------
          setenv HPD "false"
          setenv hdmi_phy_control "HPD=${HPD}  vout=${vout}"
          if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi 
          setenv dtb_addr_r "0x44000000"
          setenv dtbo_addr_r "0x48000000"
          setenv zimage_addr_r 0x40008000
          setenv uInitrd_addr_r 0x42000000
          setenv fdtbin_addr_r 0x44000000
          setenv config_addr_r "0x4B000000"
          
          setenv fdt_high "0xffffffff"
          
          # load config.ini
          load mmc 0:1 ${config_addr_r} config.ini \
              && ini generic ${config_addr_r}
          
          # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633)
          setenv ddr_freq 933
          
          # set DDR frequency
          dmc ${ddr_freq}
          
          # Default boot arguments
          setenv bootrootfs "label=RECALBOX"
          setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0"
          
          # boot commands
          fatload mmc 0:1 ${zimage_addr_r} ${zimage}
          fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd}
          fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin}
          
          fdt addr ${dtb_addr_r}
          if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
          
          setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}"
          
          # load overlays from config.ini
          if test "x${overlay_profile}" != "x"; then
              ini overlay_${overlay_profile} ${config_addr_r}
          fi
          
          if test "x{overlays}" != "x"; then
              fdt resize ${overlay_resize}
              for overlay in ${overlays}; do
                  load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \
                      && fdt apply ${dtbo_addr_r}
              done
          fi
          
          bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}
          

          Oh nice. I will ask guys to test your boot.ini. Thank you!

          cedric-debuiselle 1 Reply Last reply Reply Quote 0
          • cedric-debuiselle
            cedric-debuiselle @davidb2111 last edited by

            @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

            @kairoslair-0 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

            I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:

            ODROIDXU-UBOOT-CONFIG
            
            # U-Boot Parameters (DO NOT MODIFY)
            setenv version 4.14 
            setenv zimage boot/linux
            setenv fdtbin boot/exynos5422-odroidxu4.dtb
            setenv uInitrd boot/uInitrd
            
            # --- Screen Configuration for HDMI --- # 
            # ---------------------------------------
            # Uncomment only ONE line! Leave all commented for automatic selection.
            # Uncomment only the setenv line!
            # ---------------------------------------
            # ODROID-VU forced resolution
            # setenv videoconfig "video=HDMI-A-1:1280x800@60"
            # -----------------------------------------------
            # ODROID-VU forced EDID
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
            # -----------------------------------------------
            # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
            setenv videoconfig "video=HDMI-A-1:1920x1080@60"
            # -----------------------------------------------
            # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
            # -----------------------------------------------
            # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
            # setenv videoconfig "video=HDMI-A-1:1920x1080@50"
            # -----------------------------------------------
            # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
            # -----------------------------------------------
            # 1440x900 with monitor provided EDID information.
            # setenv videoconfig "video=HDMI-A-1:1440x900@60"
            # -----------------------------------------------
            # 1440x900 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
            # -----------------------------------------------
            # 1280x1024 without monitor data using generic information
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
            # -----------------------------------------------
            # 1280x720 (720P) with monitor provided EDID information. (720p-edid)
            # setenv videoconfig "video=HDMI-A-1:1280x720@60"
            # -----------------------------------------------
            # 1280x720 (720P) without monitor data using generic information (720p-noedid)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
            # -----------------------------------------------
            # 1024x768 without monitor data using generic information
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
            # -----------------------------------------------
            # 1024x600 without monitor data using generic information (ODROID VU7+)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
            # -----------------------------------------------
            # 800x600 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
            # -----------------------------------------------
            # 800x480 without monitor data using generic information (ODROID 7")
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
            # -----------------------------------------------
            # 720x576 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
            # -----------------------------------------------
            # 720x480 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
            # -----------------------------------------------
            # 640x480 without monitor data using generic information
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
            
            
            # --- HDMI / DVI Mode Selection ---
            # ------------------------------------------
            # - HDMI Mode
            setenv vout "hdmi"
            # - DVI Mode (disables sound over HDMI as per DVI compat)
            # setenv vout "dvi"
            
            
            # --- CPU Governor Setup ---
            # Uncomment only one line. New governor is set after 90secs after boot.
            # ------------------------------------------
            # - Performance (Keep all the CPU's at Maximum frequency)
            setenv governor "performance"
            # ------------------------------------------
            # - Ondemand
            # setenv governor "ondemand"
            # ------------------------------------------
            # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
            # setenv governor "interactive"
            # ------------------------------------------
            # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
            # setenv governor "conservative"
            # ------------------------------------------
            # - Powersave (Keeps the CPU's to the lowest possible temps)
            # setenv governor "powersave"
            
            
            # --- HDMI CEC Configuration ---
            # ------------------------------------------
            setenv cecenable "false" # false or true
            # set to true to enable HDMI CEC
            
            #------------------------------------------------------------------------------
            #
            # HDMI Hot Plug detection
            #
            #------------------------------------------------------------------------------
            #
            # Forces the HDMI subsystem to ignore the check if the cable is connected or 
            # not.
            # false : disable the detection and force it as connected.
            # true : let cable, board and monitor decide the connection status.
            # 
            # default: true
            # 
            #------------------------------------------------------------------------------
            setenv HPD "false"
            setenv hdmi_phy_control "HPD=${HPD}  vout=${vout}"
            if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi 
            setenv dtb_addr_r "0x44000000"
            setenv dtbo_addr_r "0x48000000"
            setenv zimage_addr_r 0x40008000
            setenv uInitrd_addr_r 0x42000000
            setenv fdtbin_addr_r 0x44000000
            setenv config_addr_r "0x4B000000"
            
            setenv fdt_high "0xffffffff"
            
            # load config.ini
            load mmc 0:1 ${config_addr_r} config.ini \
                && ini generic ${config_addr_r}
            
            # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633)
            setenv ddr_freq 933
            
            # set DDR frequency
            dmc ${ddr_freq}
            
            # Default boot arguments
            setenv bootrootfs "label=RECALBOX"
            setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0"
            
            # boot commands
            fatload mmc 0:1 ${zimage_addr_r} ${zimage}
            fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd}
            fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin}
            
            fdt addr ${dtb_addr_r}
            if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
            
            setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}"
            
            # load overlays from config.ini
            if test "x${overlay_profile}" != "x"; then
                ini overlay_${overlay_profile} ${config_addr_r}
            fi
            
            if test "x{overlays}" != "x"; then
                fdt resize ${overlay_resize}
                for overlay in ${overlays}; do
                    load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \
                        && fdt apply ${dtbo_addr_r}
                done
            fi
            
            bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}
            

            Oh nice. I will ask guys to test your boot.ini. Thank you!

            je viens d'essayé tft toujours eteint, j'ai recopier le boot.ini dans le cas ou j'ai fait une fausse manip, pour info je fais la manip directement avec notepad++ et la eMMC branché en USB sur windows

            ODROIDXU-UBOOT-CONFIG
            
            # U-Boot Parameters (DO NOT MODIFY)
            setenv version 4.14 
            setenv zimage boot/linux
            setenv fdtbin boot/exynos5422-odroidxu4.dtb
            setenv uInitrd boot/uInitrd
            
            # --- Screen Configuration for HDMI --- # 
            # ---------------------------------------
            # Uncomment only ONE line! Leave all commented for automatic selection.
            # Uncomment only the setenv line!
            # ---------------------------------------
            # ODROID-VU forced resolution
            # setenv videoconfig "video=HDMI-A-1:1280x800@60"
            # -----------------------------------------------
            # ODROID-VU forced EDID
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
            # -----------------------------------------------
            # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
            setenv videoconfig "video=HDMI-A-1:1920x1080@60"
            # -----------------------------------------------
            # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
            # -----------------------------------------------
            # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
            # setenv videoconfig "video=HDMI-A-1:1920x1080@50"
            # -----------------------------------------------
            # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
            # -----------------------------------------------
            # 1440x900 with monitor provided EDID information.
            # setenv videoconfig "video=HDMI-A-1:1440x900@60"
            # -----------------------------------------------
            # 1440x900 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
            # -----------------------------------------------
            # 1280x1024 without monitor data using generic information
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
            # -----------------------------------------------
            # 1280x720 (720P) with monitor provided EDID information. (720p-edid)
            # setenv videoconfig "video=HDMI-A-1:1280x720@60"
            # -----------------------------------------------
            # 1280x720 (720P) without monitor data using generic information (720p-noedid)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
            # -----------------------------------------------
            # 1024x768 without monitor data using generic information
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
            # -----------------------------------------------
            # 1024x600 without monitor data using generic information (ODROID VU7+)
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
            # -----------------------------------------------
            # 800x600 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
            # -----------------------------------------------
            # 800x480 without monitor data using generic information (ODROID 7")
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
            # -----------------------------------------------
            # 720x576 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
            # -----------------------------------------------
            # 720x480 without monitor data using generic information 
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
            # -----------------------------------------------
            # 640x480 without monitor data using generic information
            # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
            
             
            # --- HDMI / DVI Mode Selection ---
            # ------------------------------------------
            # - HDMI Mode
            setenv vout "hdmi"
            # - DVI Mode (disables sound over HDMI as per DVI compat)
            # setenv vout "dvi"
            
             
            # --- CPU Governor Setup ---
            # Uncomment only one line. New governor is set after 90secs after boot.
            # ------------------------------------------
            # - Performance (Keep all the CPU's at Maximum frequency)
            setenv governor "performance"
            # ------------------------------------------
            # - Ondemand
            # setenv governor "ondemand"
            # ------------------------------------------
            # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
            # setenv governor "interactive"
            # ------------------------------------------
            # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
            # setenv governor "conservative"
            # ------------------------------------------
            # - Powersave (Keeps the CPU's to the lowest possible temps)
            # setenv governor "powersave"
            
             
            # --- HDMI CEC Configuration ---
            # ------------------------------------------
            setenv cecenable "false" # false or true
            # set to true to enable HDMI CEC
            
            #------------------------------------------------------------------------------
            #
            # HDMI Hot Plug detection
            #
            #------------------------------------------------------------------------------
            #
            # Forces the HDMI subsystem to ignore the check if the cable is connected or 
            # not.
            # false : disable the detection and force it as connected.
            # true : let cable, board and monitor decide the connection status.
            # 
            # default: true
            # 
            #------------------------------------------------------------------------------
            setenv HPD "false"
            setenv hdmi_phy_control "HPD=${HPD}  vout=${vout}"
            if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi 
            setenv dtb_addr_r "0x44000000"
            setenv dtbo_addr_r "0x48000000"
            setenv zimage_addr_r 0x40008000
            setenv uInitrd_addr_r 0x42000000
            setenv fdtbin_addr_r 0x44000000
            setenv config_addr_r "0x4B000000"
             
            setenv fdt_high "0xffffffff"
            
            # load config.ini
            load mmc 0:1 ${config_addr_r} config.ini \
                && ini generic ${config_addr_r}
            	
            # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633)
            setenv ddr_freq 933
            
            # set DDR frequency
            dmc ${ddr_freq}
            
            # Default boot arguments
            setenv bootrootfs "label=RECALBOX"
            setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0"
            
            # boot commands
            fatload mmc 0:1 ${zimage_addr_r} ${zimage}
            fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd}
            fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin}
             
            fdt addr ${dtb_addr_r}
            if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
             
            setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}"
            
            # load overlays from config.ini
            if test "x${overlay_profile}" != "x"; then
                ini overlay_${overlay_profile} ${config_addr_r}
            fi
             
            if test "x{overlays}" != "x"; then
                fdt resize ${overlay_resize}
                for overlay in ${overlays}; do
                    load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \
                        && fdt apply ${dtbo_addr_r}
                done
            fi
             
            bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}
            
            davidb2111 1 Reply Last reply Reply Quote 0
            • davidb2111
              davidb2111 Staff @cedric-debuiselle last edited by

              @cedric-debuiselle
              Juste un truc comme ça, dans le config.ini peux-tu modifier la ligne

              overlays="hktft-cs-ogst i2c0"
              

              en

              overlays="hktft-cs-ogst"
              

              ?

              cedric-debuiselle 1 Reply Last reply Reply Quote 0
              • cedric-debuiselle
                cedric-debuiselle @davidb2111 last edited by

                @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                @cedric-debuiselle
                Juste un truc comme ça, dans le config.ini peux-tu modifier la ligne

                overlays="hktft-cs-ogst i2c0"
                

                en

                overlays="hktft-cs-ogst"
                

                ?

                non j'avais pas vu qu'il fallait le modifier
                voilà modifier je test

                [generic]
                ; Device Tree Overlay
                overlay_resize=16384
                ; uncomment next line to enable Odroid XU4 OGST
                overlay_profile=hktft_cs_ogst
                overlays="spi0 i2c0 i2c1 uart0"
                 
                [overlay_hktft_cs_ogst]
                overlays="hktft-cs-ogst"
                
                
                cedric-debuiselle 1 Reply Last reply Reply Quote 0
                • cedric-debuiselle
                  cedric-debuiselle @cedric-debuiselle last edited by

                  @cedric-debuiselle said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                  @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                  @cedric-debuiselle
                  Juste un truc comme ça, dans le config.ini peux-tu modifier la ligne

                  overlays="hktft-cs-ogst i2c0"
                  

                  en

                  overlays="hktft-cs-ogst"
                  

                  ?

                  non j'avais pas vu qu'il fallait le modifier
                  voilà modifier je test

                  [generic]
                  ; Device Tree Overlay
                  overlay_resize=16384
                  ; uncomment next line to enable Odroid XU4 OGST
                  overlay_profile=hktft_cs_ogst
                  overlays="spi0 i2c0 i2c1 uart0"
                   
                  [overlay_hktft_cs_ogst]
                  overlays="hktft-cs-ogst"
                  
                  

                  marche toujours pas

                  davidb2111 1 Reply Last reply Reply Quote 0
                  • davidb2111
                    davidb2111 Staff @cedric-debuiselle last edited by

                    @cedric-debuiselle

                    Voici 2 nouveaux fichiers à tester:

                    • boot.ini
                    • config.ini

                    David

                    cedric-debuiselle 1 Reply Last reply Reply Quote 0
                    • cedric-debuiselle
                      cedric-debuiselle @davidb2111 last edited by

                      @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                      @cedric-debuiselle

                      Voici 2 nouveaux fichiers à tester:

                      • boot.ini
                      • config.ini

                      David

                      toujours écran noir

                      davidb2111 1 Reply Last reply Reply Quote 0
                      • davidb2111
                        davidb2111 Staff @cedric-debuiselle last edited by

                        @cedric-debuiselle
                        Arf... le boot.ini et config.ini sont repris de ceux du boot d'ubuntu XU4.
                        Tu saurais tester l'image ubuntu xu4 et me dire si ça s'allume?

                        cedric-debuiselle 2 Replies Last reply Reply Quote 0
                        • davidb2111
                          davidb2111 Staff @manitou last edited by

                          @manitou

                          Tu as pu tester les nouveaux boot.ini et config.ini ?

                          1 Reply Last reply Reply Quote 0
                          • cedric-debuiselle
                            cedric-debuiselle @davidb2111 last edited by

                            @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                            @cedric-debuiselle
                            Arf... le boot.ini et config.ini sont repris de ceux du boot d'ubuntu XU4.
                            Tu saurais tester l'image ubuntu xu4 et me dire si ça s'allume?

                            Ok je vais essayer, il y a eu beaucoup de différence en très la version 7 et 6 de recalbox pour l'écran car j'avais installé sur une sd car l'eMMC marché pas terribles mais l'affichage de ogst marché très bien, dommage que je connaisse pas grand choses dans se domaine là

                            davidb2111 1 Reply Last reply Reply Quote 0
                            • davidb2111
                              davidb2111 Staff @cedric-debuiselle last edited by

                              @cedric-debuiselle
                              Les changements sont arrivés avec la 7.2 où le kernel du XU4 a été mis à jour. On passe de 4.19 à 5.4.
                              Ça apporte un meilleur support de différentes adaptateurs wifi, BT, ...

                              Les devs odroids ont revu la manière de charger le driver tft pour l'OGST et on toutes les peines du monde pour que ça marche partout.

                              On est 4 devs et betas chez RB à avoir le xu4 et l'ogst, on a jamais rencontré de souci avec l'écran. Comme on ne reproduit pas, c'est très compliqué à identifier la root cause...

                              cedric-debuiselle 1 Reply Last reply Reply Quote 0
                              • cedric-debuiselle
                                cedric-debuiselle @davidb2111 last edited by

                                @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                @cedric-debuiselle
                                Les changements sont arrivés avec la 7.2 où le kernel du XU4 a été mis à jour. On passe de 4.19 à 5.4.
                                Ça apporte un meilleur support de différentes adaptateurs wifi, BT, ...

                                Les devs odroids ont revu la manière de charger le driver tft pour l'OGST et on toutes les peines du monde pour que ça marche partout.

                                On est 4 devs et betas chez RB à avoir le xu4 et l'ogst, on a jamais rencontré de souci avec l'écran. Comme on ne reproduit pas, c'est très compliqué à identifier la root cause...

                                J'ai pas regardé mais il doit avoir peut-être des évolutions au niveau du matériel ,je vais démontrer complètement le mien et voir si je trouve des numéros de versions matériel ça peut être une cause non ?

                                davidb2111 1 Reply Last reply Reply Quote 0
                                • cedric-debuiselle
                                  cedric-debuiselle @davidb2111 last edited by

                                  @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                  @cedric-debuiselle
                                  Arf... le boot.ini et config.ini sont repris de ceux du boot d'ubuntu XU4.
                                  Tu saurais tester l'image ubuntu xu4 et me dire si ça s'allume?

                                  j'ai utliser celui la installer pas encore configuré ubuntu-20.04-5.4-mate-odroid-xu4-20210926.img.xz

                                  1 Reply Last reply Reply Quote 0
                                  • davidb2111
                                    davidb2111 Staff @cedric-debuiselle last edited by

                                    @cedric-debuiselle

                                    Oui probablement, néanmoins, je n'ai lu aucune littérature certifiant qu'il y a plusieurs versions incompatibles niveau hardware chez odroid.

                                    cedric-debuiselle 1 Reply Last reply Reply Quote 0
                                    • cedric-debuiselle
                                      cedric-debuiselle @davidb2111 last edited by

                                      @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                      @cedric-debuiselle

                                      Oui probablement, néanmoins, je n'ai lu aucune littérature certifiant qu'il y a plusieurs versions incompatibles niveau hardware chez odroid.

                                      OK
                                      je sus entrain d'installer et mettre à jour la version d'ubuntu que je t'ai indiqué

                                      davidb2111 1 Reply Last reply Reply Quote 1
                                      • davidb2111
                                        davidb2111 Staff @cedric-debuiselle last edited by

                                        @cedric-debuiselle said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                        @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                        @cedric-debuiselle

                                        Oui probablement, néanmoins, je n'ai lu aucune littérature certifiant qu'il y a plusieurs versions incompatibles niveau hardware chez odroid.

                                        OK
                                        je sus entrain d'installer et mettre à jour la version d'ubuntu que je t'ai indiqué

                                        n'oublie pas d'activer l'overlay dans le fichier boot.ini:

                                        overlay_profile=hktft_cs_ogst
                                        
                                        cedric-debuiselle 1 Reply Last reply Reply Quote 1
                                        • cedric-debuiselle
                                          cedric-debuiselle @davidb2111 last edited by

                                          @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                          @cedric-debuiselle said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                          @davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):

                                          @cedric-debuiselle

                                          Oui probablement, néanmoins, je n'ai lu aucune littérature certifiant qu'il y a plusieurs versions incompatibles niveau hardware chez odroid.

                                          OK
                                          je sus entrain d'installer et mettre à jour la version d'ubuntu que je t'ai indiqué

                                          n'oublie pas d'activer l'overlay dans le fichier boot.ini:

                                          overlay_profile=hktft_cs_ogst
                                          

                                          j'ai essayer de modifier alors pas le boot.ini mais le config.ini

                                          [generic]
                                          # Mac address configuration
                                          macaddr=00:1e:06:61:7a:39
                                          
                                          ; HDMI configuration
                                          ; Uncomment only ONE line! Leave all commented for automatic selection.
                                          ; Uncomment only the setenv line!
                                          ; ---------------------------------------
                                          ; ODROID-VU forced resolution
                                          ; setenv videoconfig "video=HDMI-A-1:1280x800@60"
                                          ; -----------------------------------------------
                                          ; ODROID-VU forced EDID
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
                                          ; -----------------------------------------------
                                          ; 1920x1200 60hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1200_60hz.bin"
                                          ; -----------------------------------------------
                                          ; 1920x1200 30hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1200_30hz.bin"
                                          ; -----------------------------------------------
                                          ; 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
                                          ; setenv videoconfig "video=HDMI-A-1:1920x1080@60"
                                          ; -----------------------------------------------
                                          ; 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
                                          ; -----------------------------------------------
                                          ; 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
                                          ; setenv videoconfig "video=HDMI-A-1:1920x1080@50"
                                          ; -----------------------------------------------
                                          ; 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
                                          ; -----------------------------------------------
                                          ; 1920x1080 24Hz (1080P) without monitor data using generic information (1080p 24hz-noedid)
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_24hz.bin"
                                          ; -----------------------------------------------
                                          ; 1920x1080 23.976Hz (1080P) without monitor data using generic information (1080p 23.976hz-noedid)
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_23_976hz.bin"
                                          ; -----------------------------------------------
                                          ; 1920x800 60hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x800.bin"
                                          ; -----------------------------------------------
                                          ; 1792x1344 60hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1792x1344.bin"
                                          ; -----------------------------------------------
                                          ; 1680x1050 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1680x1050.bin"
                                          ; -----------------------------------------------
                                          ; 1600x1200 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1600x1200.bin"
                                          ; -----------------------------------------------
                                          ; 1600x900 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1600x900.bin"
                                          ; -----------------------------------------------
                                          ; 1400x1050 60hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1400x1050.bin"
                                          ; -----------------------------------------------
                                          ; 1440x900 with monitor provided EDID information.
                                          ; setenv videoconfig "video=HDMI-A-1:1440x900@60"
                                          ; -----------------------------------------------
                                          ; 1440x900 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
                                          ; -----------------------------------------------
                                          ; 1366x768 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1366x768.bin"
                                          ; -----------------------------------------------
                                          ; 1360x768 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1360x768.bin"
                                          ; -----------------------------------------------
                                          ; 1280x1024 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
                                          ; -----------------------------------------------
                                          ; 1280x768 60hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x768.bin"
                                          ; -----------------------------------------------
                                          ; 1280x720 (720P) with monitor provided EDID information. (720p-edid)
                                          ; setenv videoconfig "video=HDMI-A-1:1280x720@60"
                                          ; -----------------------------------------------
                                          ; 1280x720 (720P) without monitor data using generic information (720p-noedid)
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
                                          ; -----------------------------------------------
                                          ; 1152x864 75hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1152x864_75hz.bin"
                                          ; -----------------------------------------------
                                          ; 1024x768 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
                                          ; -----------------------------------------------
                                          ; 1024x600 without monitor data using generic information (ODROID VU7+)
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
                                          ; -----------------------------------------------
                                          ; 800x600 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
                                          ; -----------------------------------------------
                                          ; 848x480 60hz without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/848x480.bin"
                                          ; -----------------------------------------------
                                          ; 800x480 without monitor data using generic information (ODROID 7")
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
                                          ; -----------------------------------------------
                                          ; 720x576 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
                                          ; -----------------------------------------------
                                          ; 720x480 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
                                          ; -----------------------------------------------
                                          ; 640x480 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
                                          ; -----------------------------------------------
                                          ; 480x800 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/480x800.bin"
                                          ; -----------------------------------------------
                                          ; 480x320 without monitor data using generic information
                                          ; setenv videoconfig "drm_kms_helper.edid_firmware=edid/480x320.bin"
                                          
                                          ; voutm : hdmi or dvi
                                          ; hdmi / dvi
                                          vout=hdmi
                                          
                                          ; HPD enable/disable option
                                          ; false / true
                                          HPD=true
                                          
                                          ; Enable/Disable CEC
                                          cecenable=false
                                          
                                          ; Hardkernel ODROID-VU7 support
                                          ; By default VU7 support is disabled
                                          disable_vu7=false
                                          
                                          ; DRAM Frequency
                                          ; Sets the LPDDR3 memory frequency (MHz)
                                          ; 933 / 825 / 728 / 633
                                          ddr_freq=825
                                          
                                          
                                          ; Device Tree Overlay
                                          overlay_resize=16384
                                          overlay_profile=hktft_cs_ogst
                                          overlays="spi0 i2c0 i2c1 uart0"
                                          
                                          [overlay_custom]
                                          overlays="i2c0 i2c1"
                                          
                                          [overlay_hktft32]
                                          overlays="hktft32 ads7846"
                                          
                                          [overlay_hktft35]
                                          overlays="hktft35 sx865x-i2c1"
                                          
                                          [overlay_hktft_cs_ogst]
                                          overlays="hktft-cs-ogst"
                                          
                                          davidb2111 1 Reply Last reply Reply Quote 0
                                          • davidb2111
                                            davidb2111 Staff @cedric-debuiselle last edited by

                                            @cedric-debuiselle
                                            Oui au temps pour moi, c'est bien le config.ini

                                            cedric-debuiselle 3 Replies Last reply Reply Quote 0
                                            • First post
                                              Last post

                                            Want to support us ?

                                            85
                                            Online

                                            99.6k
                                            Users

                                            28.1k
                                            Topics

                                            187.1k
                                            Posts

                                            Copyright © 2021 recalbox.com