| ODROIDXU-UBOOT-CONFIG |
| |
| setenv initrd_high "0xffffffff" |
| setenv fdt_high "0xffffffff" |
| setenv macaddr "00:1e:06:61:7a:39" |
| setenv vout "hdmi" |
| setenv HPD "true" |
| setenv cecenable "false" |
| setenv disable_vu7 "false" |
| setenv ddr_freq 825 |
| setenv external_watchdog "false" |
| setenv external_watchdog_debounce "3" |
| |
| |
| setenv dtb_loadaddr " 0x44000000" |
| setenv dtbo_addr_r "0x48000000" |
| setenv k_addr "0x40008000" |
| setenv initrd_loadaddr "0x42000000" |
| setenv config_addr_r "0x4B000000" |
| load mmc 0:1 ${config_addr_r} config.ini \ |
| && ini generic ${config_addr_r} |
| |
| setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" |
| if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi |
| if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi |
| if test "${external_watchdog}" = "true"; then setenv external_watchdog "external_watchdog=${external_watchdog} external_watchdog_debounce=${external_watchdog_debounce}"; fi |
| |
| |
| setenv bootargs "console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 ${videoconfig} ${hdmi_phy_control} ${hid_quirks} smsc95xx.macaddr=${macaddr} ${external_watchdog}" |
| |
| |
| fatload mmc 0:1 ${k_addr} zImage |
| fatload mmc 0:1 ${initrd_loadaddr} uInitrd |
| |
| setenv fdtloaded "false" |
| if test "x${board_name}" = "x"; then setenv board_name "xu4"; fi |
| if test "${board_name}" = "xu4"; then fatload mmc 0:1 ${dtb_loadaddr} exynos5422-odroidxu4.dtb; setenv fdtloaded "true"; fi |
| if test "${board_name}" = "xu3"; then fatload mmc 0:1 ${dtb_loadaddr} exynos5422-odroidxu3.dtb; setenv fdtloaded "true"; fi |
| if test "${board_name}" = "xu3l"; then fatload mmc 0:1 ${dtb_loadaddr} exynos5422-odroidxu3-lite.dtb; setenv fdtloaded "true"; fi |
| if test "${fdtloaded}" = "false"; then fatload mmc 0:1 ${dtb_loadaddr} exynos5422-odroidxu4.dtb; setenv fdtloaded "true"; fi |
| |
| fdt addr ${dtb_loadaddr} |
| |
| if test "x${overlay_profile}" != "x"; then |
| ini overlay_${overlay_profile} ${config_addr_r} |
| fi |
| |
| if test "x{overlays}" != "x"; then |
| fdt resize ${overlay_resize} |
| for overlay in ${overlays}; do |
| load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ |
| && fdt apply ${dtbo_addr_r} |
| done |
| fi |
| |
| |
| dmc ${ddr_freq} |
| |
| |
| bootz ${k_addr} ${initrd_loadaddr} ${dtb_loadaddr} |
| ```je l'ai mis à la ligne 137 ça n'a pas marché mais lien je viens de le modifier en mettant un espace enter la ligne 136 et 137 |
