Probleme affichage ogst odroid n64 case (Odroid xu4)
-
vdd_ldo15 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO15/name <== LDO15 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/regulator-state-mem/regulator-off-in-suspend <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/regulator-state-mem/name <== regulator-state-mem ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/regulator-name <== vdd_adc ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO4/name <== LDO4 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO33/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO33/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO33/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO33/regulator-name <== vdd_ldo33 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO33/name <== LDO33 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/regulator-always-on <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/regulator-state-mem/regulator-off-in-suspend <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/regulator-state-mem/name <== regulator-state-mem ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/regulator-name <== vdd_mifs ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO23/name <== LDO23 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/regulator-boot-on <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/regulator-always-on <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/regulator-name <== vdd_2.0v_ldo ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/BUCK8/name <== BUCK8 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/regulator-state-mem/regulator-off-in-suspend <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/regulator-state-mem/name <== regulator-state-mem ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/regulator-name <== vddq_mmc2 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO13/name <== LDO13 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/name <== regulators ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO2/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO2/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO2/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO2/regulator-always-on <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO2/regulator-name <== vdd_ldo2 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO2/name <== LDO2 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO31/phandle <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO31/regulator-min-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO31/regulator-max-microvolt <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO31/regulator-name <== vdd_ldo31 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/regulators/LDO31/name <== LDO31 ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/reg <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/samsung,s2mps11-acokb-ground <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/pinctrl-0 <== ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/name <== s2mps11_pmic ==> /proc/device-tree/soc/i2c@12ca0000/s2mps11_pmic@66/pinctrl-names <== default ==> /proc/device-tree/soc/i2c@12ca0000/reg <== Ê ==> /proc/device-tree/soc/i2c@12ca0000/pinctrl-0 <== ==> /proc/device-tree/soc/i2c@12ca0000/name <== i2c ==> /proc/device-tree/soc/i2c@12ca0000/pinctrl-names <== default ==> /proc/device-tree/soc/power-domain@100440e0/compatible <== samsung,exynos4210-pd ==> /proc/device-tree/soc/power-domain@100440e0/label <== MAU ==> /proc/device-tree/soc/power-domain@100440e0/phandle <== ==> /proc/device-tree/soc/power-domain@100440e0/reg <== @à ==> /proc/device-tree/soc/power-domain@100440e0/name <== power-domain ==> /proc/device-tree/soc/power-domain@100440e0/#power-domain-cells <== ==> /proc/device-tree/soc/phy@12500000/compatible <== samsung,exynos5420-usbdrd-phy ==> /proc/device-tree/soc/phy@12500000/clocks <== ==> /proc/device-tree/soc/phy@12500000/samsung,pmu-syscon <== ==> /proc/device-tree/soc/phy@12500000/clock-names <== phy ==> /proc/device-tree/soc/phy@12500000/phandle <== ==> /proc/device-tree/soc/phy@12500000/reg <== P ==> /proc/device-tree/soc/phy@12500000/#phy-cells <== ==> /proc/device-tree/soc/phy@12500000/name <== phy ==> /proc/device-tree/soc/phandle <== ==> /proc/device-tree/soc/hdmi@14530000/power-domains <== ==> /proc/device-tree/soc/hdmi@14530000/compatible <== samsung,exynos5420-hdmi ==> /proc/device-tree/soc/hdmi@14530000/clocks <== ==> /proc/device-tree/soc/hdmi@14530000/#sound-dai-cells <== ==> /proc/device-tree/soc/hdmi@14530000/clock-names <== hdmi ==> /proc/device-tree/soc/hdmi@14530000/vdd_pll-supply <== ==> /proc/device-tree/soc/hdmi@14530000/ddc <== ==> /proc/device-tree/soc/hdmi@14530000/status <== okay ==> /proc/device-tree/soc/hdmi@14530000/interrupts <== ==> /proc/device-tree/soc/hdmi@14530000/phandle <== ==> /proc/device-tree/soc/hdmi@14530000/hpd-gpios <== ==> /proc/device-tree/soc/hdmi@14530000/samsung,syscon-phandle <== ==> /proc/device-tree/soc/hdmi@14530000/vdd_osc-supply <== ==> /proc/device-tree/soc/hdmi@14530000/vdd-supply <== ==> /proc/device-tree/soc/hdmi@14530000/reg <== S ==> /proc/device-tree/soc/hdmi@14530000/pinctrl-0 <== ==> /proc/device-tree/soc/hdmi@14530000/phy <== ==> /proc/device-tree/soc/hdmi@14530000/name <== hdmi ==> /proc/device-tree/soc/hdmi@14530000/pinctrl-names <== default ==> /proc/device-tree/soc/bus_disp1_fimd/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_disp1_fimd/clocks <== ==> /proc/device-tree/soc/bus_disp1_fimd/clock-names <== bus ==> /proc/device-tree/soc/bus_disp1_fimd/status <== okay ==> /proc/device-tree/soc/bus_disp1_fimd/phandle <== ==> /proc/device-tree/soc/bus_disp1_fimd/operating-points-v2 <== ==> /proc/device-tree/soc/bus_disp1_fimd/devfreq <== ==> /proc/device-tree/soc/bus_disp1_fimd/name <== bus_disp1_fimd ==> /proc/device-tree/soc/sysmmu@13e90000/power-domains <== ==> /proc/device-tree/soc/sysmmu@13e90000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@13e90000/clocks <== ==> /proc/device-tree/soc/sysmmu@13e90000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@13e90000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@13e90000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@13e90000/interrupts <== ==> /proc/device-tree/soc/sysmmu@13e90000/phandle <== ==> /proc/device-tree/soc/sysmmu@13e90000/reg <== é ==> /proc/device-tree/soc/sysmmu@13e90000/name <== sysmmu ==> /proc/device-tree/soc/opp_table13/compatible <== operating-points-v2 ==> /proc/device-tree/soc/opp_table13/opp00/opp-hz <== ==> /proc/device-tree/soc/opp_table13/opp00/name <== opp00 ==> /proc/device-tree/soc/opp_table13/phandle <== ==> /proc/device-tree/soc/opp_table13/opp01/opp-hz <== ==> /proc/device-tree/soc/opp_table13/opp01/name <== opp01 ==> /proc/device-tree/soc/opp_table13/name <== opp_table13 ==> /proc/device-tree/soc/power-domain@100440c0/compatible <== samsung,exynos4210-pd ==> /proc/device-tree/soc/power-domain@100440c0/label <== DISP ==> /proc/device-tree/soc/power-domain@100440c0/phandle <== ==> /proc/device-tree/soc/power-domain@100440c0/reg <== @À ==> /proc/device-tree/soc/power-domain@100440c0/name <== power-domain ==> /proc/device-tree/soc/power-domain@100440c0/#power-domain-cells <== ==> /proc/device-tree/soc/mixer@14450000/power-domains <== ==> /proc/device-tree/soc/mixer@14450000/compatible <== samsung,exynos5420-mixer ==> /proc/device-tree/soc/mixer@14450000/clocks <== ==> /proc/device-tree/soc/mixer@14450000/clock-names <== mixer ==> /proc/device-tree/soc/mixer@14450000/status <== okay ==> /proc/device-tree/soc/mixer@14450000/interrupts <== ==> /proc/device-tree/soc/mixer@14450000/phandle <== ==> /proc/device-tree/soc/mixer@14450000/reg <== E ==> /proc/device-tree/soc/mixer@14450000/iommus <== ==> /proc/device-tree/soc/mixer@14450000/name <== mixer ==> /proc/device-tree/soc/bus_g2d_acp/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_g2d_acp/clocks <== ==> /proc/device-tree/soc/bus_g2d_acp/clock-names <== bus ==> /proc/device-tree/soc/bus_g2d_acp/status <== okay ==> /proc/device-tree/soc/bus_g2d_acp/phandle <== ==> /proc/device-tree/soc/bus_g2d_acp/operating-points-v2 <== ==> /proc/device-tree/soc/bus_g2d_acp/devfreq <== ==> /proc/device-tree/soc/bus_g2d_acp/name <== bus_g2d_acp ==> /proc/device-tree/soc/sysmmu@10a70000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@10a70000/clocks <== ==> /proc/device-tree/soc/sysmmu@10a70000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@10a70000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@10a70000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@10a70000/interrupts <== ==> /proc/device-tree/soc/sysmmu@10a70000/phandle <== ==> /proc/device-tree/soc/sysmmu@10a70000/reg <== § ==> /proc/device-tree/soc/sysmmu@10a70000/name <== sysmmu ==> /proc/device-tree/soc/i2c@12c70000/compatible <== samsung,s3c2440-i2c ==> /proc/device-tree/soc/i2c@12c70000/clocks <== ==> /proc/device-tree/soc/i2c@12c70000/samsung,sysreg-phandle <== ==> /proc/device-tree/soc/i2c@12c70000/clock-names <== i2c ==> /proc/device-tree/soc/i2c@12c70000/status <== okay ==> /proc/device-tree/soc/i2c@12c70000/#address-cells <== ==> /proc/device-tree/soc/i2c@12c70000/interrupts <== ==> /proc/device-tree/soc/i2c@12c70000/#size-cells <== ==> /proc/device-tree/soc/i2c@12c70000/phandle <== ==> /proc/device-tree/soc/i2c@12c70000/samsung,i2c-max-bus-freq <== ==> /proc/device-tree/soc/i2c@12c70000/reg <== Ç ==> /proc/device-tree/soc/i2c@12c70000/pinctrl-0 <== ==> /proc/device-tree/soc/i2c@12c70000/name <== i2c ==> /proc/device-tree/soc/i2c@12c70000/pinctrl-names <== default ==> /proc/device-tree/soc/nocp@10ca1800/compatible <== samsung,exynos5420-nocp ==> /proc/device-tree/soc/nocp@10ca1800/status <== okay ==> /proc/device-tree/soc/nocp@10ca1800/phandle <== ==> /proc/device-tree/soc/nocp@10ca1800/reg <== Ê ==> /proc/device-tree/soc/nocp@10ca1800/name <== nocp ==> /proc/device-tree/soc/rng@10830600/compatible <== samsung,exynos5250-trng ==> /proc/device-tree/soc/rng@10830600/clocks <== ==> /proc/device-tree/soc/rng@10830600/clock-names <== secss ==> /proc/device-tree/soc/rng@10830600/phandle <== ==> /proc/device-tree/soc/rng@10830600/reg <== ƒ ==> /proc/device-tree/soc/rng@10830600/name <== rng ==> /proc/device-tree/soc/syscon@10050000/compatible <== samsung,exynos5-sysreg ==> /proc/device-tree/soc/syscon@10050000/phandle <== ==> /proc/device-tree/soc/syscon@10050000/reg <== ==> /proc/device-tree/soc/syscon@10050000/name <== syscon ==> /proc/device-tree/soc/sysmmu@128d0000/power-domains <== ==> /proc/device-tree/soc/sysmmu@128d0000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@128d0000/clocks <== ==> /proc/device-tree/soc/sysmmu@128d0000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@128d0000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@128d0000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@128d0000/interrupts <== ==> /proc/device-tree/soc/sysmmu@128d0000/phandle <== ==> /proc/device-tree/soc/sysmmu@128d0000/reg <== ==> /proc/device-tree/soc/sysmmu@128d0000/name <== sysmmu ==> /proc/device-tree/soc/tmu@10060000/compatible <== samsung,exynos5420-tmu ==> /proc/device-tree/soc/tmu@10060000/clocks <== ==> /proc/device-tree/soc/tmu@10060000/#thermal-sensor-cells <== ==> /proc/device-tree/soc/tmu@10060000/clock-names <== tmu_apbif ==> /proc/device-tree/soc/tmu@10060000/status <== okay ==> /proc/device-tree/soc/tmu@10060000/interrupts <== ==> /proc/device-tree/soc/tmu@10060000/phandle <== ==> /proc/device-tree/soc/tmu@10060000/vtmu-supply <== ==> /proc/device-tree/soc/tmu@10060000/reg <== ==> /proc/device-tree/soc/tmu@10060000/name <== tmu ==> /proc/device-tree/soc/bus_fsys_apb/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_fsys_apb/clocks <== ==> /proc/device-tree/soc/bus_fsys_apb/clock-names <== bus ==> /proc/device-tree/soc/bus_fsys_apb/status <== okay ==> /proc/device-tree/soc/bus_fsys_apb/phandle <== ==> /proc/device-tree/soc/bus_fsys_apb/operating-points-v2 <== ==> /proc/device-tree/soc/bus_fsys_apb/devfreq <== ==> /proc/device-tree/soc/bus_fsys_apb/name <== bus_fsys_apb ==> /proc/device-tree/soc/clock-controller@10010000/compatible <== samsung,exynos5800-clock ==> /proc/device-tree/soc/clock-controller@10010000/#clock-cells <== ==> /proc/device-tree/soc/clock-controller@10010000/phandle <== ==> /proc/device-tree/soc/clock-controller@10010000/reg <== ==> /proc/device-tree/soc/clock-controller@10010000/name <== clock-controller ==> /proc/device-tree/soc/power-domain@10044020/compatible <== samsung,exynos4210-pd ==> /proc/device-tree/soc/power-domain@10044020/label <== ISP ==> /proc/device-tree/soc/power-domain@10044020/phandle <== ==> /proc/device-tree/soc/power-domain@10044020/reg <== @ ==> /proc/device-tree/soc/power-domain@10044020/name <== power-domain ==> /proc/device-tree/soc/power-domain@10044020/#power-domain-cells <== ==> /proc/device-tree/soc/watchdog@101d0000/compatible <== samsung,exynos5420-wdt ==> /proc/device-tree/soc/watchdog@101d0000/clocks <== ==> /proc/device-tree/soc/watchdog@101d0000/clock-names <== watchdog ==> /proc/device-tree/soc/watchdog@101d0000/interrupts <== ==> /proc/device-tree/soc/watchdog@101d0000/phandle <== ==> /proc/device-tree/soc/watchdog@101d0000/samsung,syscon-phandle <== ==> /proc/device-tree/soc/watchdog@101d0000/reg <== ==> /proc/device-tree/soc/watchdog@101d0000/name <== watchdog ==> /proc/device-tree/soc/sysmmu@11f10000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@11f10000/clocks <== ==> /proc/device-tree/soc/sysmmu@11f10000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@11f10000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@11f10000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@11f10000/interrupts <== ==> /proc/device-tree/soc/sysmmu@11f10000/phandle <== ==> /proc/device-tree/soc/sysmmu@11f10000/reg <== ñ ==> /proc/device-tree/soc/sysmmu@11f10000/name <== sysmmu ==> /proc/device-tree/soc/mipi-video-phy/compatible <== samsung,s5pv210-mipi-video-phy ==> /proc/device-tree/soc/mipi-video-phy/phandle <== ==> /proc/device-tree/soc/mipi-video-phy/syscon <== ==> /proc/device-tree/soc/mipi-video-phy/#phy-cells <== ==> /proc/device-tree/soc/mipi-video-phy/name <== mipi-video-phy ==> /proc/device-tree/soc/sysmmu@11200000/power-domains <== ==> /proc/device-tree/soc/sysmmu@11200000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@11200000/clocks <== ==> /proc/device-tree/soc/sysmmu@11200000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@11200000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@11200000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@11200000/interrupts <== ==> /proc/device-tree/soc/sysmmu@11200000/phandle <== ==> /proc/device-tree/soc/sysmmu@11200000/reg <== ==> /proc/device-tree/soc/sysmmu@11200000/name <== sysmmu ==> /proc/device-tree/soc/ppmu@10d70000/compatible <== samsung,exynos-ppmu ==> /proc/device-tree/soc/ppmu@10d70000/clocks <== ==> /proc/device-tree/soc/ppmu@10d70000/clock-names <== ppmu ==> /proc/device-tree/soc/ppmu@10d70000/status <== okay ==> /proc/device-tree/soc/ppmu@10d70000/phandle <== ==> /proc/device-tree/soc/ppmu@10d70000/events/ppmu-event3-dmc1_1/phandle <== ==> /proc/device-tree/soc/ppmu@10d70000/events/ppmu-event3-dmc1_1/event-name <== ppmu-event3-dmc1_1 ==> /proc/device-tree/soc/ppmu@10d70000/events/ppmu-event3-dmc1_1/name <== ppmu-event3-dmc1_1 ==> /proc/device-tree/soc/ppmu@10d70000/events/name <== events ==> /proc/device-tree/soc/ppmu@10d70000/reg <== × ==> /proc/device-tree/soc/ppmu@10d70000/name <== ppmu ==> /proc/device-tree/soc/opp_table8/compatible <== operating-points-v2 ==> /proc/device-tree/soc/opp_table8/opp00/opp-hz <== ==> /proc/device-tree/soc/opp_table8/opp00/name <== opp00 ==> /proc/device-tree/soc/opp_table8/phandle <== ==> /proc/device-tree/soc/opp_table8/name <== opp_table8 ==> /proc/device-tree/soc/bus_jpeg_apb/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_jpeg_apb/clocks <== ==> /proc/device-tree/soc/bus_jpeg_apb/clock-names <== bus ==> /proc/device-tree/soc/bus_jpeg_apb/status <== okay ==> /proc/device-tree/soc/bus_jpeg_apb/phandle <== ==> /proc/device-tree/soc/bus_jpeg_apb/operating-points-v2 <== ==> /proc/device-tree/soc/bus_jpeg_apb/devfreq <== ==> /proc/device-tree/soc/bus_jpeg_apb/name <== bus_jpeg_apb ==> /proc/device-tree/soc/opp_table11/compatible <== operating-points-v2 ==> /proc/device-tree/soc/opp_table11/opp02/opp-hz <== ==> /proc/device-tree/soc/opp_table11/opp02/name <== opp02 ==> /proc/device-tree/soc/opp_table11/opp00/opp-hz <== ==> /proc/device-tree/soc/opp_table11/opp00/name <== opp00 ==> /proc/device-tree/soc/opp_table11/phandle <== ==> /proc/device-tree/soc/opp_table11/opp03/opp-hz <== ==> /proc/device-tree/soc/opp_table11/opp03/name <== opp03 ==> /proc/device-tree/soc/opp_table11/opp01/opp-hz <== ==> /proc/device-tree/soc/opp_table11/opp01/name <== opp01 ==> /proc/device-tree/soc/opp_table11/name <== opp_table11 ==> /proc/device-tree/soc/serial@12c00000/compatible <== samsung,exynos4210-uart ==> /proc/device-tree/soc/serial@12c00000/clocks <== ==> /proc/device-tree/soc/serial@12c00000/clock-names <== uart ==> /proc/device-tree/soc/serial@12c00000/status <== okay ==> /proc/device-tree/soc/serial@12c00000/interrupts <== ==> /proc/device-tree/soc/serial@12c00000/dma-names <== rx ==> /proc/device-tree/soc/serial@12c00000/phandle <== ==> /proc/device-tree/soc/serial@12c00000/reg <== À ==> /proc/device-tree/soc/serial@12c00000/dmas <== ==> /proc/device-tree/soc/serial@12c00000/name <== serial ==> /proc/device-tree/soc/interrupt-controller@10481000/compatible <== arm,gic-400 ==> /proc/device-tree/soc/interrupt-controller@10481000/#interrupt-cells <== ==> /proc/device-tree/soc/interrupt-controller@10481000/interrupts <== ==> /proc/device-tree/soc/interrupt-controller@10481000/phandle <== ==> /proc/device-tree/soc/interrupt-controller@10481000/reg <== H ==> /proc/device-tree/soc/interrupt-controller@10481000/name <== interrupt-controller ==> /proc/device-tree/soc/interrupt-controller@10481000/interrupt-controller <== ==> /proc/device-tree/soc/power-domain@10044000/compatible <== samsung,exynos4210-pd ==> /proc/device-tree/soc/power-domain@10044000/label <== GSC ==> /proc/device-tree/soc/power-domain@10044000/phandle <== ==> /proc/device-tree/soc/power-domain@10044000/reg <== @ ==> /proc/device-tree/soc/power-domain@10044000/name <== power-domain ==> /proc/device-tree/soc/power-domain@10044000/#power-domain-cells <== ==> /proc/device-tree/soc/scaler@12810000/power-domains <== ==> /proc/device-tree/soc/scaler@12810000/compatible <== samsung,exynos5420-scaler ==> /proc/device-tree/soc/scaler@12810000/clocks <== ==> /proc/device-tree/soc/scaler@12810000/clock-names <== mscl ==> /proc/device-tree/soc/scaler@12810000/interrupts <== ==> /proc/device-tree/soc/scaler@12810000/phandle <== ==> /proc/device-tree/soc/scaler@12810000/reg <== ==> /proc/device-tree/soc/scaler@12810000/iommus <== ==> /proc/device-tree/soc/scaler@12810000/name <== scaler ==> /proc/device-tree/soc/mmc@12210000/compatible <== samsung,exynos5420-dw-mshc-smu ==> /proc/device-tree/soc/mmc@12210000/clocks <== ==> /proc/device-tree/soc/mmc@12210000/clock-names <== biu ==> /proc/device-tree/soc/mmc@12210000/fifo-depth <== ==> /proc/device-tree/soc/mmc@12210000/status <== disabled ==> /proc/device-tree/soc/mmc@12210000/#address-cells <== ==> /proc/device-tree/soc/mmc@12210000/interrupts <== ==> /proc/device-tree/soc/mmc@12210000/#size-cells <== ==> /proc/device-tree/soc/mmc@12210000/phandle <== ==> /proc/device-tree/soc/mmc@12210000/reg <== ! ==> /proc/device-tree/soc/mmc@12210000/name <== mmc ==> /proc/device-tree/soc/video-scaler@13e00000/power-domains <== ==> /proc/device-tree/soc/video-scaler@13e00000/compatible <== samsung,exynos5420-gsc ==> /proc/device-tree/soc/video-scaler@13e00000/clocks <== ==> /proc/device-tree/soc/video-scaler@13e00000/clock-names <== gscl ==> /proc/device-tree/soc/video-scaler@13e00000/interrupts <== ==> /proc/device-tree/soc/video-scaler@13e00000/phandle <== ==> /proc/device-tree/soc/video-scaler@13e00000/reg <== à ==> /proc/device-tree/soc/video-scaler@13e00000/iommus <== ==> /proc/device-tree/soc/video-scaler@13e00000/name <== video-scaler ==> /proc/device-tree/soc/sysmmu@11d40000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@11d40000/clocks <== ==> /proc/device-tree/soc/sysmmu@11d40000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@11d40000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@11d40000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@11d40000/interrupts <== ==> /proc/device-tree/soc/sysmmu@11d40000/phandle <== ==> /proc/device-tree/soc/sysmmu@11d40000/reg <== Ô ==> /proc/device-tree/soc/sysmmu@11d40000/name <== sysmmu ==> /proc/device-tree/soc/usb@12120000/compatible <== samsung,exynos4210-ohci ==> /proc/device-tree/soc/usb@12120000/clocks <== ==> /proc/device-tree/soc/usb@12120000/clock-names <== usbhost ==> /proc/device-tree/soc/usb@12120000/phy-names <== host ==> /proc/device-tree/soc/usb@12120000/interrupts <== ==> /proc/device-tree/soc/usb@12120000/phandle <== ==> /proc/device-tree/soc/usb@12120000/phys <== ==> /proc/device-tree/soc/usb@12120000/reg <== ==> /proc/device-tree/soc/usb@12120000/name <== usb ==> /proc/device-tree/soc/memory-controller@12250000/compatible <== samsung,exynos4210-srom ==> /proc/device-tree/soc/memory-controller@12250000/phandle <== ==> /proc/device-tree/soc/memory-controller@12250000/reg <== % ==> /proc/device-tree/soc/memory-controller@12250000/name <== memory-controller ==> /proc/device-tree/soc/spi@12d40000/compatible <== samsung,exynos4210-spi ==> /proc/device-tree/soc/spi@12d40000/clocks <== ==> /proc/device-tree/soc/spi@12d40000/clock-names <== spi ==> /proc/device-tree/soc/spi@12d40000/status <== disabled ==> /proc/device-tree/soc/spi@12d40000/#address-cells <== ==> /proc/device-tree/soc/spi@12d40000/interrupts <== ==> /proc/device-tree/soc/spi@12d40000/#size-cells <== ==> /proc/device-tree/soc/spi@12d40000/dma-names <== tx ==> /proc/device-tree/soc/spi@12d40000/phandle <== ==> /proc/device-tree/soc/spi@12d40000/reg <== Ô ==> /proc/device-tree/soc/spi@12d40000/pinctrl-0 <== ==> /proc/device-tree/soc/spi@12d40000/dmas <== ==> /proc/device-tree/soc/spi@12d40000/name <== spi ==> /proc/device-tree/soc/spi@12d40000/pinctrl-names <== default ==> /proc/device-tree/soc/i2c@12e10000/compatible <== samsung,exynos5250-hsi2c ==> /proc/device-tree/soc/i2c@12e10000/clocks <== ==> /proc/device-tree/soc/i2c@12e10000/clock-names <== hsi2c ==> /proc/device-tree/soc/i2c@12e10000/status <== disabled ==> /proc/device-tree/soc/i2c@12e10000/#address-cells <== ==> /proc/device-tree/soc/i2c@12e10000/interrupts <== ==> /proc/device-tree/soc/i2c@12e10000/#size-cells <== ==> /proc/device-tree/soc/i2c@12e10000/phandle <== ==> /proc/device-tree/soc/i2c@12e10000/reg <== á ==> /proc/device-tree/soc/i2c@12e10000/pinctrl-0 <== ==> /proc/device-tree/soc/i2c@12e10000/name <== -
i2c ==> /proc/device-tree/soc/i2c@12e10000/pinctrl-names <== default ==> /proc/device-tree/soc/opp_table6/compatible <== operating-points-v2 ==> /proc/device-tree/soc/opp_table6/opp04/opp-hz <== ==> /proc/device-tree/soc/opp_table6/opp04/name <== opp04 ==> /proc/device-tree/soc/opp_table6/opp02/opp-hz <== ==> /proc/device-tree/soc/opp_table6/opp02/name <== opp02 ==> /proc/device-tree/soc/opp_table6/opp00/opp-hz <== ==> /proc/device-tree/soc/opp_table6/opp00/name <== opp00 ==> /proc/device-tree/soc/opp_table6/phandle <== ==> /proc/device-tree/soc/opp_table6/opp03/opp-hz <== ==> /proc/device-tree/soc/opp_table6/opp03/name <== opp03 ==> /proc/device-tree/soc/opp_table6/opp01/opp-hz <== ==> /proc/device-tree/soc/opp_table6/opp01/name <== opp01 ==> /proc/device-tree/soc/opp_table6/name <== opp_table6 ==> /proc/device-tree/soc/jpeg@11f60000/compatible <== samsung,exynos5420-jpeg ==> /proc/device-tree/soc/jpeg@11f60000/clocks <== ==> /proc/device-tree/soc/jpeg@11f60000/clock-names <== jpeg ==> /proc/device-tree/soc/jpeg@11f60000/interrupts <== ==> /proc/device-tree/soc/jpeg@11f60000/phandle <== ==> /proc/device-tree/soc/jpeg@11f60000/reg <== ö ==> /proc/device-tree/soc/jpeg@11f60000/iommus <== ==> /proc/device-tree/soc/jpeg@11f60000/name <== jpeg ==> /proc/device-tree/soc/i2c@12cb0000/compatible <== samsung,exynos5250-hsi2c ==> /proc/device-tree/soc/i2c@12cb0000/clocks <== ==> /proc/device-tree/soc/i2c@12cb0000/clock-names <== hsi2c ==> /proc/device-tree/soc/i2c@12cb0000/status <== okay ==> /proc/device-tree/soc/i2c@12cb0000/#address-cells <== ==> /proc/device-tree/soc/i2c@12cb0000/interrupts <== ==> /proc/device-tree/soc/i2c@12cb0000/#size-cells <== ==> /proc/device-tree/soc/i2c@12cb0000/samsung,hs-mode <== ==> /proc/device-tree/soc/i2c@12cb0000/phandle <== ==> /proc/device-tree/soc/i2c@12cb0000/reg <== Ë ==> /proc/device-tree/soc/i2c@12cb0000/clock-frequency <== ==> /proc/device-tree/soc/i2c@12cb0000/pinctrl-0 <== ==> /proc/device-tree/soc/i2c@12cb0000/name <== i2c ==> /proc/device-tree/soc/i2c@12cb0000/pinctrl-names <== default ==> /proc/device-tree/soc/tmu@100a0000/compatible <== samsung,exynos5420-tmu-ext-triminfo ==> /proc/device-tree/soc/tmu@100a0000/clocks <== ==> /proc/device-tree/soc/tmu@100a0000/#thermal-sensor-cells <== ==> /proc/device-tree/soc/tmu@100a0000/clock-names <== tmu_apbif ==> /proc/device-tree/soc/tmu@100a0000/status <== okay ==> /proc/device-tree/soc/tmu@100a0000/interrupts <== ==> /proc/device-tree/soc/tmu@100a0000/phandle <== ==> /proc/device-tree/soc/tmu@100a0000/vtmu-supply <== ==> /proc/device-tree/soc/tmu@100a0000/reg <== ==> /proc/device-tree/soc/tmu@100a0000/name <== tmu ==> /proc/device-tree/soc/nocp@10ca1400/compatible <== samsung,exynos5420-nocp ==> /proc/device-tree/soc/nocp@10ca1400/status <== okay ==> /proc/device-tree/soc/nocp@10ca1400/phandle <== ==> /proc/device-tree/soc/nocp@10ca1400/reg <== Ê ==> /proc/device-tree/soc/nocp@10ca1400/name <== nocp ==> /proc/device-tree/soc/ppmu@10d00000/compatible <== samsung,exynos-ppmu ==> /proc/device-tree/soc/ppmu@10d00000/clocks <== ==> /proc/device-tree/soc/ppmu@10d00000/clock-names <== ppmu ==> /proc/device-tree/soc/ppmu@10d00000/status <== okay ==> /proc/device-tree/soc/ppmu@10d00000/phandle <== ==> /proc/device-tree/soc/ppmu@10d00000/events/ppmu-event3-dmc0_0/phandle <== ==> /proc/device-tree/soc/ppmu@10d00000/events/ppmu-event3-dmc0_0/event-name <== ppmu-event3-dmc0_0 ==> /proc/device-tree/soc/ppmu@10d00000/events/ppmu-event3-dmc0_0/name <== ppmu-event3-dmc0_0 ==> /proc/device-tree/soc/ppmu@10d00000/events/name <== events ==> /proc/device-tree/soc/ppmu@10d00000/reg <== Ð ==> /proc/device-tree/soc/ppmu@10d00000/name <== ppmu ==> /proc/device-tree/soc/bus_disp1/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_disp1/clocks <== ==> /proc/device-tree/soc/bus_disp1/clock-names <== bus ==> /proc/device-tree/soc/bus_disp1/status <== okay ==> /proc/device-tree/soc/bus_disp1/phandle <== ==> /proc/device-tree/soc/bus_disp1/operating-points-v2 <== ==> /proc/device-tree/soc/bus_disp1/devfreq <== ==> /proc/device-tree/soc/bus_disp1/name <== bus_disp1 ==> /proc/device-tree/soc/cec@101b0000/compatible <== samsung,s5p-cec ==> /proc/device-tree/soc/cec@101b0000/clocks <== ==> /proc/device-tree/soc/cec@101b0000/needs-hpd <== ==> /proc/device-tree/soc/cec@101b0000/clock-names <== hdmicec ==> /proc/device-tree/soc/cec@101b0000/status <== okay ==> /proc/device-tree/soc/cec@101b0000/interrupts <== ==> /proc/device-tree/soc/cec@101b0000/phandle <== ==> /proc/device-tree/soc/cec@101b0000/samsung,syscon-phandle <== ==> /proc/device-tree/soc/cec@101b0000/reg <== ==> /proc/device-tree/soc/cec@101b0000/pinctrl-0 <== ==> /proc/device-tree/soc/cec@101b0000/hdmi-phandle <== ==> /proc/device-tree/soc/cec@101b0000/name <== cec ==> /proc/device-tree/soc/cec@101b0000/pinctrl-names <== default ==> /proc/device-tree/soc/sysmmu@128a0000/power-domains <== ==> /proc/device-tree/soc/sysmmu@128a0000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@128a0000/clocks <== ==> /proc/device-tree/soc/sysmmu@128a0000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@128a0000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@128a0000/interrupts <== ==> /proc/device-tree/soc/sysmmu@128a0000/phandle <== ==> /proc/device-tree/soc/sysmmu@128a0000/reg <== Š ==> /proc/device-tree/soc/sysmmu@128a0000/name <== sysmmu ==> /proc/device-tree/soc/opp_table4/compatible <== operating-points-v2 ==> /proc/device-tree/soc/opp_table4/opp00/opp-hz <== ==> /proc/device-tree/soc/opp_table4/opp00/name <== opp00 ==> /proc/device-tree/soc/opp_table4/phandle <== ==> /proc/device-tree/soc/opp_table4/opp01/opp-hz <== ==> /proc/device-tree/soc/opp_table4/opp01/name <== opp01 ==> /proc/device-tree/soc/opp_table4/opp-shared <== ==> /proc/device-tree/soc/opp_table4/name <== opp_table4 ==> /proc/device-tree/soc/pinctrl@3860000/power-domains <== ==> /proc/device-tree/soc/pinctrl@3860000/compatible <== samsung,exynos5420-pinctrl ==> /proc/device-tree/soc/pinctrl@3860000/gpz/gpio-controller <== ==> /proc/device-tree/soc/pinctrl@3860000/gpz/#interrupt-cells <== ==> /proc/device-tree/soc/pinctrl@3860000/gpz/phandle <== ==> /proc/device-tree/soc/pinctrl@3860000/gpz/#gpio-cells <== ==> /proc/device-tree/soc/pinctrl@3860000/gpz/name <== gpz ==> /proc/device-tree/soc/pinctrl@3860000/gpz/interrupt-controller <== ==> /proc/device-tree/soc/pinctrl@3860000/interrupts <== ==> /proc/device-tree/soc/pinctrl@3860000/phandle <== ==> /proc/device-tree/soc/pinctrl@3860000/i2s0-bus/samsung,pin-pud <== ==> /proc/device-tree/soc/pinctrl@3860000/i2s0-bus/phandle <== ==> /proc/device-tree/soc/pinctrl@3860000/i2s0-bus/samsung,pins <== gpz-0 ==> /proc/device-tree/soc/pinctrl@3860000/i2s0-bus/samsung,pin-function <== ==> /proc/device-tree/soc/pinctrl@3860000/i2s0-bus/samsung,pin-drv <== ==> /proc/device-tree/soc/pinctrl@3860000/i2s0-bus/name <== i2s0-bus ==> /proc/device-tree/soc/pinctrl@3860000/reg <== † ==> /proc/device-tree/soc/pinctrl@3860000/name <== pinctrl ==> /proc/device-tree/soc/i2c@12c80000/compatible <== samsung,s3c2440-i2c ==> /proc/device-tree/soc/i2c@12c80000/clocks <== ==> /proc/device-tree/soc/i2c@12c80000/samsung,sysreg-phandle <== ==> /proc/device-tree/soc/i2c@12c80000/clock-names <== i2c ==> /proc/device-tree/soc/i2c@12c80000/samsung,i2c-sda-delay <== ==> /proc/device-tree/soc/i2c@12c80000/status <== okay ==> /proc/device-tree/soc/i2c@12c80000/#address-cells <== ==> /proc/device-tree/soc/i2c@12c80000/interrupts <== ==> /proc/device-tree/soc/i2c@12c80000/#size-cells <== ==> /proc/device-tree/soc/i2c@12c80000/phandle <== ==> /proc/device-tree/soc/i2c@12c80000/samsung,i2c-max-bus-freq <== ==> /proc/device-tree/soc/i2c@12c80000/reg <== È ==> /proc/device-tree/soc/i2c@12c80000/pinctrl-0 <== ==> /proc/device-tree/soc/i2c@12c80000/name <== i2c ==> /proc/device-tree/soc/i2c@12c80000/pinctrl-names <== default ==> /proc/device-tree/soc/name <== soc ==> /proc/device-tree/soc/dsi@14500000/compatible <== samsung,exynos5410-mipi-dsi ==> /proc/device-tree/soc/dsi@14500000/clocks <== ==> /proc/device-tree/soc/dsi@14500000/clock-names <== bus_clk ==> /proc/device-tree/soc/dsi@14500000/phy-names <== dsim ==> /proc/device-tree/soc/dsi@14500000/status <== disabled ==> /proc/device-tree/soc/dsi@14500000/#address-cells <== ==> /proc/device-tree/soc/dsi@14500000/interrupts <== ==> /proc/device-tree/soc/dsi@14500000/#size-cells <== ==> /proc/device-tree/soc/dsi@14500000/phys <== ==> /proc/device-tree/soc/dsi@14500000/reg <== P ==> /proc/device-tree/soc/dsi@14500000/name <== dsi ==> /proc/device-tree/soc/sysmmu@128e0000/power-domains <== ==> /proc/device-tree/soc/sysmmu@128e0000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@128e0000/clocks <== ==> /proc/device-tree/soc/sysmmu@128e0000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@128e0000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@128e0000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@128e0000/interrupts <== ==> /proc/device-tree/soc/sysmmu@128e0000/phandle <== ==> /proc/device-tree/soc/sysmmu@128e0000/reg <== Ž ==> /proc/device-tree/soc/sysmmu@128e0000/name <== sysmmu ==> /proc/device-tree/soc/hdmiphy@145d0000/phandle <== ==> /proc/device-tree/soc/hdmiphy@145d0000/reg <== ] ==> /proc/device-tree/soc/hdmiphy@145d0000/name <== hdmiphy ==> /proc/device-tree/soc/chipid@10000000/compatible <== samsung,exynos4210-chipid ==> /proc/device-tree/soc/chipid@10000000/phandle <== ==> /proc/device-tree/soc/chipid@10000000/reg <== ==> /proc/device-tree/soc/chipid@10000000/name <== chipid ==> /proc/device-tree/soc/adc@12d10000/compatible <== samsung,exynos-adc-v2 ==> /proc/device-tree/soc/adc@12d10000/clocks <== ==> /proc/device-tree/soc/adc@12d10000/#io-channel-cells <== ==> /proc/device-tree/soc/adc@12d10000/clock-names <== adc ==> /proc/device-tree/soc/adc@12d10000/status <== okay ==> /proc/device-tree/soc/adc@12d10000/interrupts <== ==> /proc/device-tree/soc/adc@12d10000/phandle <== ==> /proc/device-tree/soc/adc@12d10000/samsung,syscon-phandle <== ==> /proc/device-tree/soc/adc@12d10000/vdd-supply <== ==> /proc/device-tree/soc/adc@12d10000/reg <== Ñ ==> /proc/device-tree/soc/adc@12d10000/name <== adc ==> /proc/device-tree/soc/adc@12d10000/io-channel-ranges <== ==> /proc/device-tree/soc/sysmmu@11f20000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@11f20000/clocks <== ==> /proc/device-tree/soc/sysmmu@11f20000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@11f20000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@11f20000/interrupts <== ==> /proc/device-tree/soc/sysmmu@11f20000/phandle <== ==> /proc/device-tree/soc/sysmmu@11f20000/reg <== ò ==> /proc/device-tree/soc/sysmmu@11f20000/name <== sysmmu ==> /proc/device-tree/soc/bus_g2d/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_g2d/clocks <== ==> /proc/device-tree/soc/bus_g2d/clock-names <== bus ==> /proc/device-tree/soc/bus_g2d/status <== okay ==> /proc/device-tree/soc/bus_g2d/phandle <== ==> /proc/device-tree/soc/bus_g2d/operating-points-v2 <== ==> /proc/device-tree/soc/bus_g2d/devfreq <== ==> /proc/device-tree/soc/bus_g2d/name <== bus_g2d ==> /proc/device-tree/soc/bus_wcore/compatible <== samsung,exynos-bus ==> /proc/device-tree/soc/bus_wcore/clocks <== ==> /proc/device-tree/soc/bus_wcore/clock-names <== bus ==> /proc/device-tree/soc/bus_wcore/exynos,saturation-ratio <== ==> /proc/device-tree/soc/bus_wcore/status <== okay ==> /proc/device-tree/soc/bus_wcore/phandle <== ==> /proc/device-tree/soc/bus_wcore/operating-points-v2 <== ==> /proc/device-tree/soc/bus_wcore/vdd-supply <== ==> /proc/device-tree/soc/bus_wcore/devfreq-events <== ==> /proc/device-tree/soc/bus_wcore/name <== bus_wcore ==> /proc/device-tree/soc/tmu@10068000/compatible <== samsung,exynos5420-tmu-ext-triminfo ==> /proc/device-tree/soc/tmu@10068000/clocks <== ==> /proc/device-tree/soc/tmu@10068000/#thermal-sensor-cells <== ==> /proc/device-tree/soc/tmu@10068000/clock-names <== tmu_apbif ==> /proc/device-tree/soc/tmu@10068000/status <== okay ==> /proc/device-tree/soc/tmu@10068000/interrupts <== ==> /proc/device-tree/soc/tmu@10068000/phandle <== ==> /proc/device-tree/soc/tmu@10068000/vtmu-supply <== ==> /proc/device-tree/soc/tmu@10068000/reg <== € ==> /proc/device-tree/soc/tmu@10068000/name <== tmu ==> /proc/device-tree/soc/sysmmu@11210000/power-domains <== ==> /proc/device-tree/soc/sysmmu@11210000/compatible <== samsung,exynos-sysmmu ==> /proc/device-tree/soc/sysmmu@11210000/clocks <== ==> /proc/device-tree/soc/sysmmu@11210000/#iommu-cells <== ==> /proc/device-tree/soc/sysmmu@11210000/clock-names <== sysmmu ==> /proc/device-tree/soc/sysmmu@11210000/interrupt-parent <== ==> /proc/device-tree/soc/sysmmu@11210000/interrupts <== ==> /proc/device-tree/soc/sysmmu@11210000/phandle <== ==> /proc/device-tree/soc/sysmmu@11210000/reg <== ! ==> /proc/device-tree/soc/sysmmu@11210000/name <== sysmmu ==> /proc/device-tree/firmware@2073000/compatible <== samsung,secure-firmware ==> /proc/device-tree/firmware@2073000/reg <== 0 ==> /proc/device-tree/firmware@2073000/name <== firmware ==> /proc/device-tree/model <== Hardkernel Odroid XU4 ==> /proc/device-tree/arm-a15-pmu/compatible <== arm,cortex-a15-pmu ==> /proc/device-tree/arm-a15-pmu/status <== okay ==> /proc/device-tree/arm-a15-pmu/interrupt-parent <== ==> /proc/device-tree/arm-a15-pmu/interrupts <== ==> /proc/device-tree/arm-a15-pmu/phandle <== ==> /proc/device-tree/arm-a15-pmu/interrupt-affinity <== ==> /proc/device-tree/arm-a15-pmu/name <== arm-a15-pmu ==> /proc/device-tree/aliases/i2c3 <== /soc/i2c@12c90000 ==> /proc/device-tree/aliases/i2c10 <== /soc/i2c@12e20000 ==> /proc/device-tree/aliases/spi2 <== /soc/spi@12d40000 ==> /proc/device-tree/aliases/i2c1 <== /soc/i2c@12cb0000 ==> /proc/device-tree/aliases/spi0 <== /soc/spi@12d30000 ==> /proc/device-tree/aliases/mshc2 <== /soc/mmc@12220000 ==> /proc/device-tree/aliases/gsc1 <== /soc/video-scaler@13e10000 ==> /proc/device-tree/aliases/usbdrdphy0 <== /soc/phy@12100000 ==> /proc/device-tree/aliases/i2c8 <== /soc/i2c@12e00000 ==> /proc/device-tree/aliases/pinctrl4 <== /soc/pinctrl@3860000 ==> /proc/device-tree/aliases/mshc0 <== /soc/mmc@12200000 ==> /proc/device-tree/aliases/serial3 <== /soc/serial@12c30000 ==> /proc/device-tree/aliases/i2c6 <== /soc/i2c@12cc0000 ==> /proc/device-tree/aliases/pinctrl2 <== /soc/pinctrl@14000000 ==> /proc/device-tree/aliases/serial1 <== /soc/serial@12c10000 ==> /proc/device-tree/aliases/i2c4 <== /soc/i2c@12ca0000 ==> /proc/device-tree/aliases/pinctrl0 <== /soc/pinctrl@13400000 ==> /proc/device-tree/aliases/i2c2 <== /soc/i2c@12c80000 ==> /proc/device-tree/aliases/spi1 <== /soc/spi@12d20000 ==> /proc/device-tree/aliases/i2c0 <== /soc/i2c@12c70000 ==> /proc/device-tree/aliases/usbdrdphy1 <== /soc/phy@12500000 ==> /proc/device-tree/aliases/i2c9 <== /soc/i2c@12e10000 ==> /proc/device-tree/aliases/mshc1 <== /soc/mmc@12210000 ==> /proc/device-tree/aliases/gsc0 <== /soc/video-scaler@13e00000 ==> /proc/device-tree/aliases/i2c7 <== /soc/i2c@12cd0000 ==> /proc/device-tree/aliases/pinctrl3 <== /soc/pinctrl@14010000 ==> /proc/device-tree/aliases/serial2 <== /soc/serial@12c20000 ==> /proc/device-tree/aliases/i2c5 <== /soc/i2c@12c60000 ==> /proc/device-tree/aliases/pinctrl1 <== /soc/pinctrl@13410000 ==> /proc/device-tree/aliases/name <== aliases ==> /proc/device-tree/aliases/serial0 <== /soc/serial@12c00000 ==> /proc/device-tree/chosen/stdout-path <== serial2:115200n8 ==> /proc/device-tree/chosen/bootargs <== label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance video=HDMI-A-1:1920x1080@60 HPD=false vout=hdmi ==> /proc/device-tree/chosen/linux,initrd-start <== Oì@ ==> /proc/device-tree/chosen/linux,initrd-end <== Oÿú ==> /proc/device-tree/chosen/name <== chosen ==> /proc/device-tree/interrupt-parent <== ==> /proc/device-tree/#address-cells <== ==> /proc/device-tree/thermal-zones/gpu-thermal/thermal-sensors <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-2/hysteresis <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-2/temperature <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-2/type <== active ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-2/name <== cpu-alert-2 ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-0/hysteresis <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-0/temperature <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-0/type <== active ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-0/name <== cpu-alert-0 ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-1/hysteresis <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-1/temperature <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-1/type <== active ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-alert-1/name <== cpu-alert-1 ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-crit-0/hysteresis <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-crit-0/temperature <== ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-crit-0/type <== critical ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/cpu-crit-0/name <== cpu-crit-0 ==> /proc/device-tree/thermal-zones/gpu-thermal/trips/name <== trips ==> /proc/device-tree/thermal-zones/gpu-thermal/polling-delay <== ==> /proc/device-tree/thermal-zones/gpu-thermal/polling-delay-passive <== ==> /proc/device-tree/thermal-zones/gpu-thermal/phandle <== ==> /proc/device-tree/thermal-zones/gpu-thermal/name <== gpu-thermal ==> /proc/device-tree/thermal-zones/cpu1-thermal/thermal-sensors <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-4/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-4/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-4/type <== passive ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-4/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-4/name <== cpu-alert-4 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-2/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-2/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-2/type <== passive ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-2/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-2/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-2/name <== cpu-alert-2 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-0/type <== passive ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-0/name <== cpu-alert-0 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-5/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-5/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-5/type <== passive ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-5/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-5/name <== cpu-alert-5 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-3/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-3/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-3/type <== passive ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-3/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-3/name <== cpu-alert-3 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-1/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-1/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-1/type <== passive ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-1/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-1/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-alert-1/name <== cpu-alert-1 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-crit-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-crit-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-crit-0/type <== critical ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-crit-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-crit-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/cpu-crit-0/name <== cpu-crit-0 ==> /proc/device-tree/thermal-zones/cpu1-thermal/trips/name <== trips ==> /proc/device-tree/thermal-zones/cpu1-thermal/polling-delay <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/polling-delay-passive <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/phandle <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map4/trip <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map4/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map4/name <== map4 ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map2/trip <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map2/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map2/name <== map2 ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map0/trip <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map0/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map0/name <== map0 ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map5/trip <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map5/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map5/name <== map5 ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map3/trip <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map3/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map3/name <== map3 ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map1/trip <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map1/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/map1/name <== map1 ==> /proc/device-tree/thermal-zones/cpu1-thermal/cooling-maps/name <== cooling-maps ==> /proc/device-tree/thermal-zones/cpu1-thermal/name <== cpu1-thermal ==> /proc/device-tree/thermal-zones/cpu2-thermal/thermal-sensors <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-4/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-4/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-4/type <== passive ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-4/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-4/name <== cpu-alert-4 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-2/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-2/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-2/type <== passive ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-2/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-2/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-2/name <== cpu-alert-2 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-0/type <== passive ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-0/name <== cpu-alert-0 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-5/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-5/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-5/type <== passive ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-5/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-5/name <== cpu-alert-5 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-3/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-3/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-3/type <== passive ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-3/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-3/name <== cpu-alert-3 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-1/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-1/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-1/type <== passive ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-1/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-1/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-alert-1/name <== cpu-alert-1 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-crit-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-crit-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-crit-0/type <== critical ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-crit-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-crit-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/cpu-crit-0/name <== cpu-crit-0 ==> /proc/device-tree/thermal-zones/cpu2-thermal/trips/name <== trips ==> /proc/device-tree/thermal-zones/cpu2-thermal/polling-delay <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/polling-delay-passive <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/phandle <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map4/trip <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map4/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map4/name <== map4 ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map2/trip <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map2/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map2/name <== map2 ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map0/trip <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map0/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map0/name <== map0 ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map5/trip <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map5/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map5/name <== map5 ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map3/trip <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map3/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map3/name <== map3 ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map1/trip <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map1/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/map1/name <== map1 ==> /proc/device-tree/thermal-zones/cpu2-thermal/cooling-maps/name <== cooling-maps ==> /proc/device-tree/thermal-zones/cpu2-thermal/name <== cpu2-thermal ==> /proc/device-tree/thermal-zones/cpu3-thermal/thermal-sensors <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-4/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-4/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-4/type <== passive ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-4/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-4/name <== cpu-alert-4 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-2/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-2/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-2/type <== passive ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-2/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-2/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-2/name <== cpu-alert-2 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-0/type <== passive ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-0/name <== cpu-alert-0 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-5/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-5/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-5/type <== passive ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-5/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-5/name <== cpu-alert-5 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-3/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-3/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-3/type <== -
passive ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-3/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-3/name <== cpu-alert-3 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-1/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-1/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-1/type <== passive ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-1/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-1/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-alert-1/name <== cpu-alert-1 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-crit-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-crit-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-crit-0/type <== critical ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-crit-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-crit-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/cpu-crit-0/name <== cpu-crit-0 ==> /proc/device-tree/thermal-zones/cpu3-thermal/trips/name <== trips ==> /proc/device-tree/thermal-zones/cpu3-thermal/polling-delay <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/polling-delay-passive <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/phandle <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map4/trip <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map4/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map4/name <== map4 ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map2/trip <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map2/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map2/name <== map2 ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map0/trip <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map0/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map0/name <== map0 ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map5/trip <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map5/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map5/name <== map5 ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map3/trip <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map3/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map3/name <== map3 ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map1/trip <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map1/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/map1/name <== map1 ==> /proc/device-tree/thermal-zones/cpu3-thermal/cooling-maps/name <== cooling-maps ==> /proc/device-tree/thermal-zones/cpu3-thermal/name <== cpu3-thermal ==> /proc/device-tree/thermal-zones/cpu0-thermal/thermal-sensors <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-4/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-4/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-4/type <== passive ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-4/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-4/name <== cpu-alert-4 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-2/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-2/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-2/type <== passive ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-2/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-2/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-2/name <== cpu-alert-2 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-0/type <== passive ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-0/name <== cpu-alert-0 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-5/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-5/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-5/type <== passive ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-5/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-5/name <== cpu-alert-5 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-3/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-3/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-3/type <== passive ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-3/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-3/name <== cpu-alert-3 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-1/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-1/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-1/type <== passive ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-1/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-1/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-alert-1/name <== cpu-alert-1 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-crit-0/hysteresis <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-crit-0/temperature <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-crit-0/type <== critical ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-crit-0/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-crit-0/irq-mode <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/cpu-crit-0/name <== cpu-crit-0 ==> /proc/device-tree/thermal-zones/cpu0-thermal/trips/name <== trips ==> /proc/device-tree/thermal-zones/cpu0-thermal/polling-delay <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/polling-delay-passive <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/phandle <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map4/trip <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map4/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map4/name <== map4 ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map2/trip <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map2/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map2/name <== map2 ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map0/trip <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map0/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map0/name <== map0 ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map5/trip <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map5/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map5/name <== map5 ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map3/trip <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map3/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map3/name <== map3 ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map1/trip <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map1/cooling-device <== ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/map1/name <== map1 ==> /proc/device-tree/thermal-zones/cpu0-thermal/cooling-maps/name <== cooling-maps ==> /proc/device-tree/thermal-zones/cpu0-thermal/name <== cpu0-thermal ==> /proc/device-tree/thermal-zones/name <== thermal-zones ==> /proc/device-tree/opp_table1/opp-200000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-200000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-200000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-200000000/name <== opp-200000000 ==> /proc/device-tree/opp_table1/compatible <== operating-points-v2 ==> /proc/device-tree/opp_table1/opp-900000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-900000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-900000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-900000000/name <== opp-900000000 ==> /proc/device-tree/opp_table1/opp-1400000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-1400000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-1400000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-1400000000/name <== opp-1400000000 ==> /proc/device-tree/opp_table1/opp-600000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-600000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-600000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-600000000/name <== opp-600000000 ==> /proc/device-tree/opp_table1/opp-1100000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-1100000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-1100000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-1100000000/name <== opp-1100000000 ==> /proc/device-tree/opp_table1/opp-300000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-300000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-300000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-300000000/name <== opp-300000000 ==> /proc/device-tree/opp_table1/opp-700000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-700000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-700000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-700000000/name <== opp-700000000 ==> /proc/device-tree/opp_table1/opp-1200000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-1200000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-1200000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-1200000000/name <== opp-1200000000 ==> /proc/device-tree/opp_table1/phandle <== ==> /proc/device-tree/opp_table1/opp-400000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-400000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-400000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-400000000/name <== opp-400000000 ==> /proc/device-tree/opp_table1/opp-shared <== ==> /proc/device-tree/opp_table1/opp-800000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-800000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-800000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-800000000/name <== opp-800000000 ==> /proc/device-tree/opp_table1/opp-1300000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-1300000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-1300000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-1300000000/name <== opp-1300000000 ==> /proc/device-tree/opp_table1/opp-500000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-500000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-500000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-500000000/name <== opp-500000000 ==> /proc/device-tree/opp_table1/name <== opp_table1 ==> /proc/device-tree/opp_table1/opp-1000000000/opp-microvolt <== ==> /proc/device-tree/opp_table1/opp-1000000000/opp-hz <== ==> /proc/device-tree/opp_table1/opp-1000000000/clock-latency-ns <== ==> /proc/device-tree/opp_table1/opp-1000000000/name <== opp-1000000000 ==> /proc/device-tree/#size-cells <== ==> /proc/device-tree/pwm-fan/cooling-min-state <== ==> /proc/device-tree/pwm-fan/compatible <== pwm-fan ==> /proc/device-tree/pwm-fan/cooling-levels <== ==> /proc/device-tree/pwm-fan/phandle <== ==> /proc/device-tree/pwm-fan/cooling-max-state <== ==> /proc/device-tree/pwm-fan/pwms <== ==> /proc/device-tree/pwm-fan/#cooling-cells <== ==> /proc/device-tree/pwm-fan/name <== pwm-fan ==> /proc/device-tree/timer/compatible <== arm,armv7-timer ==> /proc/device-tree/timer/interrupts <== ==> /proc/device-tree/timer/phandle <== ==> /proc/device-tree/timer/clock-frequency <== n6 ==> /proc/device-tree/timer/name <== timer ==> /proc/device-tree/sound/assigned-clock-parents <== ==> /proc/device-tree/sound/compatible <== samsung,odroid-xu3-audio ==> /proc/device-tree/sound/samsung,audio-routing <== I2S Playback ==> /proc/device-tree/sound/cpu/sound-dai <== ==> /proc/device-tree/sound/cpu/name <== cpu ==> /proc/device-tree/sound/model <== Odroid-XU4 ==> /proc/device-tree/sound/assigned-clock-rates <== ==> /proc/device-tree/sound/assigned-clocks <== ==> /proc/device-tree/sound/phandle <== ==> /proc/device-tree/sound/codec/sound-dai <== ==> /proc/device-tree/sound/codec/name <== codec ==> /proc/device-tree/sound/name <== sound ==> /proc/device-tree/cpus/cpu@3/compatible <== arm,cortex-a15 ==> /proc/device-tree/cpus/cpu@3/clocks <== ==> /proc/device-tree/cpus/cpu@3/device_type <== cpu ==> /proc/device-tree/cpus/cpu@3/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@3/phandle <== ==> /proc/device-tree/cpus/cpu@3/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@3/reg <== ==> /proc/device-tree/cpus/cpu@3/clock-frequency <== w5” ==> /proc/device-tree/cpus/cpu@3/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@3/cci-control-port <== ==> /proc/device-tree/cpus/cpu@3/name <== cpu ==> /proc/device-tree/cpus/cpu@1/compatible <== arm,cortex-a15 ==> /proc/device-tree/cpus/cpu@1/clocks <== ==> /proc/device-tree/cpus/cpu@1/device_type <== cpu ==> /proc/device-tree/cpus/cpu@1/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@1/phandle <== ==> /proc/device-tree/cpus/cpu@1/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@1/reg <== ==> /proc/device-tree/cpus/cpu@1/clock-frequency <== w5” ==> /proc/device-tree/cpus/cpu@1/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@1/cci-control-port <== ==> /proc/device-tree/cpus/cpu@1/name <== cpu ==> /proc/device-tree/cpus/cpu@103/compatible <== arm,cortex-a7 ==> /proc/device-tree/cpus/cpu@103/clocks <== ==> /proc/device-tree/cpus/cpu@103/device_type <== cpu ==> /proc/device-tree/cpus/cpu@103/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@103/phandle <== ==> /proc/device-tree/cpus/cpu@103/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@103/reg <== ==> /proc/device-tree/cpus/cpu@103/clock-frequency <== SrN ==> /proc/device-tree/cpus/cpu@103/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@103/cci-control-port <== ==> /proc/device-tree/cpus/cpu@103/name <== cpu ==> /proc/device-tree/cpus/cpu@101/compatible <== arm,cortex-a7 ==> /proc/device-tree/cpus/cpu@101/clocks <== ==> /proc/device-tree/cpus/cpu@101/device_type <== cpu ==> /proc/device-tree/cpus/cpu@101/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@101/phandle <== ==> /proc/device-tree/cpus/cpu@101/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@101/reg <== ==> /proc/device-tree/cpus/cpu@101/clock-frequency <== SrN ==> /proc/device-tree/cpus/cpu@101/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@101/cci-control-port <== ==> /proc/device-tree/cpus/cpu@101/name <== cpu ==> /proc/device-tree/cpus/#address-cells <== ==> /proc/device-tree/cpus/cpu@2/compatible <== arm,cortex-a15 ==> /proc/device-tree/cpus/cpu@2/clocks <== ==> /proc/device-tree/cpus/cpu@2/device_type <== cpu ==> /proc/device-tree/cpus/cpu@2/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@2/phandle <== ==> /proc/device-tree/cpus/cpu@2/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@2/reg <== ==> /proc/device-tree/cpus/cpu@2/clock-frequency <== w5” ==> /proc/device-tree/cpus/cpu@2/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@2/cci-control-port <== ==> /proc/device-tree/cpus/cpu@2/name <== cpu ==> /proc/device-tree/cpus/#size-cells <== ==> /proc/device-tree/cpus/cpu@0/compatible <== arm,cortex-a15 ==> /proc/device-tree/cpus/cpu@0/clocks <== ==> /proc/device-tree/cpus/cpu@0/device_type <== cpu ==> /proc/device-tree/cpus/cpu@0/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@0/cpu-supply <== ==> /proc/device-tree/cpus/cpu@0/phandle <== ==> /proc/device-tree/cpus/cpu@0/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@0/reg <== ==> /proc/device-tree/cpus/cpu@0/clock-frequency <== w5” ==> /proc/device-tree/cpus/cpu@0/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@0/cci-control-port <== ==> /proc/device-tree/cpus/cpu@0/name <== cpu ==> /proc/device-tree/cpus/cpu@102/compatible <== arm,cortex-a7 ==> /proc/device-tree/cpus/cpu@102/clocks <== ==> /proc/device-tree/cpus/cpu@102/device_type <== cpu ==> /proc/device-tree/cpus/cpu@102/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@102/phandle <== ==> /proc/device-tree/cpus/cpu@102/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@102/reg <== ==> /proc/device-tree/cpus/cpu@102/clock-frequency <== SrN ==> /proc/device-tree/cpus/cpu@102/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@102/cci-control-port <== ==> /proc/device-tree/cpus/cpu@102/name <== cpu ==> /proc/device-tree/cpus/cpu@100/compatible <== arm,cortex-a7 ==> /proc/device-tree/cpus/cpu@100/clocks <== ==> /proc/device-tree/cpus/cpu@100/device_type <== cpu ==> /proc/device-tree/cpus/cpu@100/capacity-dmips-mhz <== ==> /proc/device-tree/cpus/cpu@100/cpu-supply <== ==> /proc/device-tree/cpus/cpu@100/phandle <== ==> /proc/device-tree/cpus/cpu@100/operating-points-v2 <== ==> /proc/device-tree/cpus/cpu@100/reg <== ==> /proc/device-tree/cpus/cpu@100/clock-frequency <== SrN ==> /proc/device-tree/cpus/cpu@100/#cooling-cells <== ==> /proc/device-tree/cpus/cpu@100/cci-control-port <== ==> /proc/device-tree/cpus/cpu@100/name <== cpu ==> /proc/device-tree/cpus/name <== cpus ==> /proc/device-tree/lpddr3/compatible <== samsung,K3QF2F20DB ==> /proc/device-tree/lpddr3/tRL-min-tck <== ==> /proc/device-tree/lpddr3/tRAS-min-tck <== ==> /proc/device-tree/lpddr3/tRCD-min-tck <== ==> /proc/device-tree/lpddr3/tXP-min-tck <== ==> /proc/device-tree/lpddr3/tCKE-min-tck <== ==> /proc/device-tree/lpddr3/tRC-min-tck <== ==> /proc/device-tree/lpddr3/tWTR-min-tck <== ==> /proc/device-tree/lpddr3/density <== ==> /proc/device-tree/lpddr3/tRPpb-min-tck <== ==> /proc/device-tree/lpddr3/tWR-min-tck <== ==> /proc/device-tree/lpddr3/tXSR-min-tck <== ==> /proc/device-tree/lpddr3/#address-cells <== ==> /proc/device-tree/lpddr3/io-width <== ==> /proc/device-tree/lpddr3/#size-cells <== ==> /proc/device-tree/lpddr3/tDQSCK-min-tck <== ==> /proc/device-tree/lpddr3/tWL-min-tck <== ==> /proc/device-tree/lpddr3/tRRD-min-tck <== ==> /proc/device-tree/lpddr3/phandle <== ==> /proc/device-tree/lpddr3/tR2R-C2C-min-tck <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/compatible <== jedec,lpddr3-timings ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tWTR <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRC <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tWR <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRAS <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRPab <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tXP <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRPpb <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRFC <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/min-freq <== õá ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tR2R-C2C <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tW2W-C2C <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/phandle <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tMRD <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/reg <== /¯ ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRTP <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tFAW <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tCKESR <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tXSR <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/name <== lpddr3-timings ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tCKE <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRCD <== ==> /proc/device-tree/lpddr3/lpddr3-timings@800000000/tRRD <== ==> /proc/device-tree/lpddr3/tRFC-min-tck <== ==> /proc/device-tree/lpddr3/tCKESR-min-tck <== ==> /proc/device-tree/lpddr3/tMRD-min-tck <== ==> /proc/device-tree/lpddr3/tFAW-min-tck <== ==> /proc/device-tree/lpddr3/tW2W-C2C-min-tck <== ==> /proc/device-tree/lpddr3/tRTP-min-tck <== ==> /proc/device-tree/lpddr3/name <== lpddr3 ==> /proc/device-tree/lpddr3/tRPab-min-tck <== ==> /proc/device-tree/name <== ==> /proc/device-tree/arm-a7-pmu/compatible <== arm,cortex-a7-pmu ==> /proc/device-tree/arm-a7-pmu/status <== okay ==> /proc/device-tree/arm-a7-pmu/interrupt-parent <== ==> /proc/device-tree/arm-a7-pmu/interrupts <== ==> /proc/device-tree/arm-a7-pmu/phandle <== ==> /proc/device-tree/arm-a7-pmu/interrupt-affinity <== ==> /proc/device-tree/arm-a7-pmu/name <== arm-a7-pmu ==> /proc/device-tree/pwmleds/compatible <== pwm-leds ==> /proc/device-tree/pwmleds/blueled/max_brightness <== ==> /proc/device-tree/pwmleds/blueled/pwm-names <== pwm2 ==> /proc/device-tree/pwmleds/blueled/label <== blue:heartbeat ==> /proc/device-tree/pwmleds/blueled/pwms <== ==> /proc/device-tree/pwmleds/blueled/linux,default-trigger <== heartbeat ==> /proc/device-tree/pwmleds/blueled/name <== blueled ==> /proc/device-tree/pwmleds/name <== pwmleds -
Voila enfin terminé
-
@manitou
arf désolé pour les manipulationsBon, l'overlay n'est pas chargé. Reste à comprendre pourquoi il ne se charge pas. Je vais trouver un moyen de charger l'overlay à chaud ou par un autre biais.
Je te tiens au courant.
-
@davidb2111 Tkt c'est rien, mais je te cache pas avoir bien galère
Pas de souci j’attends ton retour avec impatience
-
@davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
@manitou said in Probleme affichage ogst odroid n64 case (Odroid xu4):
/recalbox/share/system$ dmesg
Ok, merci. Le module tft n'est pas chargé.
Moyen de m'envoyer le résultat de la commande:find /proc/device-tree/ -type f -exec head {} +David.
Bonjour j'ai aussi le même problème que manitou
# mount -o rw,remount /boot # cd /boot/ # cp boot.ini.sample boot.ini # cp config.ini.sample config.ini # nano boot.iniODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv version 4.14 setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv fdtbin_addr_r 0x44000000 setenv config_addr_r "0x4B000000" setenv fdt_high "0xffffffff" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # set DDR frequency dmc ${ddr_freq} # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}[generic] ; Device Tree Overlay overlay_resize=16384 ; uncomment next line to enable Odroid XU4 OGST overlay_profile=hktft_cs_ogst overlays="spi0 i2c0 i2c1 uart0" [overlay_hktft_cs_ogst] overlays="hktft-cs-ogst i2c0" -
Hello @manitou,
Voici un fichier
boot.inimodifié:ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv initrd_high "0xffffffff" setenv fdt_high "0xffffffff" setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv config_addr_r "0x4B000000" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # Boot Args setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${dtb_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi # set DDR frequency dmc ${ddr_freq} bootz ${zimage_addr_r} ${uInitrd_addr_r} ${dtb_addr_r}Tu peux le copier sur la partition RECALBOX. N'oublie pas de modifier le mode vidéo (par défaut FHD).
edit: j'ai remodifié le boot.ini
a+
David -
@davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
Hello @manitou,
Voici un fichier
boot.inimodifié:ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv initrd_high "0xffffffff" setenv fdt_high "0xffffffff" setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv config_addr_r "0x4B000000" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # Boot Args setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${dtb_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi # set DDR frequency dmc ${ddr_freq} bootz ${zimage_addr_r} ${uInitrd_addr_r} ${dtb_addr_r}Tu peux le copier sur la partition RECALBOX. N'oublie pas de modifier le mode vidéo (par défaut FHD).
edit: j'ai remodifié le boot.ini
a+
DavidBonjour David, j'ai le même probleme que manitou, j'ai supprimé tout ce qu'il y a vait dans le boot.ini et fait un copier coller de celui que tu a modifié
ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv initrd_high "0xffffffff" setenv fdt_high "0xffffffff" setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv config_addr_r "0x4B000000" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # Boot Args setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${dtb_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi # set DDR frequency dmc ${ddr_freq} bootz ${zimage_addr_r} ${uInitrd_addr_r} ${dtb_addr_r}voila mon config.ini
[generic] ; Device Tree Overlay overlay_resize=16384 ; uncomment next line to enable Odroid XU4 OGST overlay_profile=hktft_cs_ogst overlays="spi0 i2c0 i2c1 uart0" [overlay_hktft_cs_ogst] overlays="hktft-cs-ogst i2c0"j'ai toujour le tft qui ne s'allume pas
-
I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:
ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv version 4.14 setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv fdtbin_addr_r 0x44000000 setenv config_addr_r "0x4B000000" setenv fdt_high "0xffffffff" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # set DDR frequency dmc ${ddr_freq} # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r} -
@cedric-debuiselle
Si tu as le temps, pourrais tu tester avec leboot.inide @Kairoslair-0 ? -
@kairoslair-0 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:
ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv version 4.14 setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv fdtbin_addr_r 0x44000000 setenv config_addr_r "0x4B000000" setenv fdt_high "0xffffffff" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # set DDR frequency dmc ${ddr_freq} # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}Oh nice. I will ask guys to test your
boot.ini. Thank you! -
@davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
@kairoslair-0 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:
ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv version 4.14 setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv fdtbin_addr_r 0x44000000 setenv config_addr_r "0x4B000000" setenv fdt_high "0xffffffff" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # set DDR frequency dmc ${ddr_freq} # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}Oh nice. I will ask guys to test your
boot.ini. Thank you!je viens d'essayé tft toujours eteint, j'ai recopier le boot.ini dans le cas ou j'ai fait une fausse manip, pour info je fais la manip directement avec notepad++ et la eMMC branché en USB sur windows
ODROIDXU-UBOOT-CONFIG # U-Boot Parameters (DO NOT MODIFY) setenv version 4.14 setenv zimage boot/linux setenv fdtbin boot/exynos5422-odroidxu4.dtb setenv uInitrd boot/uInitrd # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid) setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid) # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x1024 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 1024x600 without monitor data using generic information (ODROID VU7+) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" # --- CPU Governor Setup --- # Uncomment only one line. New governor is set after 90secs after boot. # ------------------------------------------ # - Performance (Keep all the CPU's at Maximum frequency) setenv governor "performance" # ------------------------------------------ # - Ondemand # setenv governor "ondemand" # ------------------------------------------ # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.) # setenv governor "interactive" # ------------------------------------------ # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications) # setenv governor "conservative" # ------------------------------------------ # - Powersave (Keeps the CPU's to the lowest possible temps) # setenv governor "powersave" # --- HDMI CEC Configuration --- # ------------------------------------------ setenv cecenable "false" # false or true # set to true to enable HDMI CEC #------------------------------------------------------------------------------ # # HDMI Hot Plug detection # #------------------------------------------------------------------------------ # # Forces the HDMI subsystem to ignore the check if the cable is connected or # not. # false : disable the detection and force it as connected. # true : let cable, board and monitor decide the connection status. # # default: true # #------------------------------------------------------------------------------ setenv HPD "false" setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi setenv dtb_addr_r "0x44000000" setenv dtbo_addr_r "0x48000000" setenv zimage_addr_r 0x40008000 setenv uInitrd_addr_r 0x42000000 setenv fdtbin_addr_r 0x44000000 setenv config_addr_r "0x4B000000" setenv fdt_high "0xffffffff" # load config.ini load mmc 0:1 ${config_addr_r} config.ini \ && ini generic ${config_addr_r} # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633) setenv ddr_freq 933 # set DDR frequency dmc ${ddr_freq} # Default boot arguments setenv bootrootfs "label=RECALBOX" setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0" # boot commands fatload mmc 0:1 ${zimage_addr_r} ${zimage} fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd} fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin} fdt addr ${dtb_addr_r} if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}" # load overlays from config.ini if test "x${overlay_profile}" != "x"; then ini overlay_${overlay_profile} ${config_addr_r} fi if test "x{overlays}" != "x"; then fdt resize ${overlay_resize} for overlay in ${overlays}; do load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \ && fdt apply ${dtbo_addr_r} done fi bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r} -
@cedric-debuiselle
Juste un truc comme ça, dans le config.ini peux-tu modifier la ligneoverlays="hktft-cs-ogst i2c0"en
overlays="hktft-cs-ogst"?
-
@davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
@cedric-debuiselle
Juste un truc comme ça, dans le config.ini peux-tu modifier la ligneoverlays="hktft-cs-ogst i2c0"en
overlays="hktft-cs-ogst"?
non j'avais pas vu qu'il fallait le modifier
voilà modifier je test[generic] ; Device Tree Overlay overlay_resize=16384 ; uncomment next line to enable Odroid XU4 OGST overlay_profile=hktft_cs_ogst overlays="spi0 i2c0 i2c1 uart0" [overlay_hktft_cs_ogst] overlays="hktft-cs-ogst" -
@cedric-debuiselle said in Probleme affichage ogst odroid n64 case (Odroid xu4):
@davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
@cedric-debuiselle
Juste un truc comme ça, dans le config.ini peux-tu modifier la ligneoverlays="hktft-cs-ogst i2c0"en
overlays="hktft-cs-ogst"?
non j'avais pas vu qu'il fallait le modifier
voilà modifier je test[generic] ; Device Tree Overlay overlay_resize=16384 ; uncomment next line to enable Odroid XU4 OGST overlay_profile=hktft_cs_ogst overlays="spi0 i2c0 i2c1 uart0" [overlay_hktft_cs_ogst] overlays="hktft-cs-ogst"marche toujours pas
-
-
@davidb2111 said in Probleme affichage ogst odroid n64 case (Odroid xu4):
Voici 2 nouveaux fichiers à tester:
David
toujours écran noir
-
@cedric-debuiselle
Arf... le boot.ini et config.ini sont repris de ceux du boot d'ubuntu XU4.
Tu saurais tester l'image ubuntu xu4 et me dire si ça s'allume? -
Tu as pu tester les nouveaux boot.ini et config.ini ?
