Knock knock, its me, with the next controller-related topic.
Sorry but I have no luck so far.
My problem is described like this post from December.
https://forum.recalbox.com/topic/21901/ps4-controller-not-automatic-pairing-after-boot/4?_=1616701963065
In short, the BT-Controller is not connecting after rebooting the Pi4 4GB. Version of recalbox is 7.1.1. It is flashed on a SD-Card with 32GB. Image is distributed and flash by Raspberry Pi Imager. The sticker of the Controller I bought is showing CUH-ZCT2E as model-number. I´m quiet sure it not an original one.
Here some info about the paired and actual connected controller given by bluetoothcli:
[Wireless Controller]# info 2D:92:30:00:96:C9
Device 2D:92:30:00:96:C9 (public)
Name: Wireless Controller
Alias: Wireless Controller
Class: 0x00002508
Icon: input-gaming
Paired: yes
Trusted: no
Blocked: no
Connected: yes
LegacyPairing: no
UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
Modalias: usb:v054Cp05C4d0100
I´m able to force the issue without reboot by turning the BT off and on again by cli command power off/on
When I try to connect then, the output looks like this:
[Wireless Controller]# power off
[CHG] Controller B8:27:EB:FF:08:35 Discoverable: no
[CHG] Device 2D:92:30:00:96:C9 ServicesResolved: no
[CHG] Device 2D:92:30:00:96:C9 Connected: no
Changing power off succeeded
[CHG] Controller B8:27:EB:FF:08:35 Powered: no
[CHG] Controller B8:27:EB:FF:08:35 Discovering: no
[bluetooth]# power on
Changing power on succeeded
[CHG] Controller B8:27:EB:FF:08:35 Powered: yes
[CHG] Device 2D:92:30:00:96:C9 Connected: yes
[CHG] Device 2D:92:30:00:96:C9 Connected: no
First it tells Connected: yes (Controller keeps blinking)
maybe 3 seconds later => no
I have testet all options in the recalbox.conf for PS3 controller ( bluez 5 / official / shanwan )
Am I doing something wrong?
The post above is closed with the info the issue is fixed with version 7.0.1
Thanks in advance
Svart
