[Non officiel] Recalbox PC x86_64 avec les drivers Nvidia !!

[BibouCover]

Bon je viens de me rendre compte que le problème venait de la partition que je sélectionné au démarrage sur ma clé usb.
Au final j'arrive à accéder au menu sans problème qui ne présente aucun ralentissement MAGIQUE !
Par contre impossible de lancer les roms pas défaut présent (retour sur le menu d'emulstation)
Si nécessaire je peux faire des tests avec des Roms perso ce weekend. Dites moi si cela peut être aider d'avoir un retour sur ça ?
A+

[voljega]

@biboucover tu as reconfiguré ta manette dans EmulationStation ?

[strodown]

@biboucover merci pour ton retour comme a dit voljega a tu bien configurer ta manette?
si le problème persiste merci de faire une archive support de ta recalbox ça se passe dans le web-manager tu lance quelque jeu avant même si il ne ce lance pas.

[chris256]

@strodown said in Recalbox PC x86_64 avec les drivers Nvidia !!:

@chris256 very good !!!
you have a little more detail on the performance of your pc? how to operate the menu before and after for granted I test on a game of gamecube kind zelda wind waker thank you very much for your test and back

OK. I'll try to test it this week-end and give feedback here.

[chris256]

@strodown said in Recalbox PC x86_64 avec les drivers Nvidia !!:

@chris256 very good !!!
you have a little more detail on the performance of your pc? how to operate the menu before and after for granted I test on a game of gamecube kind zelda wind waker thank you very much for your test and back

Hello ! So I tried to do the performance evaluation that you asked.

When I do the first start, I end up to a black screen. Here is what I get from the log: lvl0: Error creating SDL window! Couldn't find matching GLX visual and here is the complete log.

At the black screen, I login via ssh, edit the file to allow nvidia driver and reboot. Now ES starts well.

About the fluidity in menu, it is perfect. I also tested Mario Sunshine. It is very fluid, even setting internal resolution to 1080p (3x).

However I have a big issue when launching retroarch-based games (as the nes or snes games available in realbox such as 2048 for nes): loading time is of about 20 seconds with black screen. Then the game seems to work fine. Quite strange. Did you encounter this issue?

Do you plan releasing a new version based on latest beta? Or maybe do you wait the final release of recalbox for compiling a new version? Or may it be directly included in official final version?

Please tell me if you need more information.

PS: my card is an nvidia 750Ti.

Thanks!

[strodown]

@chris256 hello then in a first time you will connect in ssh to create a conf file for nvidia what will theoretically solve the problem of GLX
once connect in ssh tape this:

nano / usr / share / X11 / xorg.conf.d / 50-card.conf

you add this:

Section "device"
Identify "card0"
Driver "nvidia"
EndSection

Section "Module"
Load "glx"
EndSection

in a second temp checked this:
ls /usr/lib/xorg/modules/extensions/libglx.so*
you must have two files in this directory one libglx.so and one libglx.so.410.73
if the command rolls back file not found
type this command:
cd /usr/lib/xorg/modules/extensions/
ln -sf libglx.so.410.73 libglx.so

[chris256]

Thanks @strodown for your reply! I don’t have access to the TV right now but I’ll try later. Just to be sure: do I have to reinstall and at the first boot do the ssh manipulation that you described or should I just do it on the existing install on which nvidia driver is activated? Also, is the purpose to make it work without nvidia driver enabled or to solve the long black screen when launching games?

[strodown]

@chris256 the goal is to correct the concerns and to keep the diver nvidia it is not necessary to redo an intallation you can modify since the installation already existing
ps: the first command has spaces
nano /usr/share/X11/xorg.conf.d/50-card.conf

[chris256]

@strodown said in Recalbox PC x86_64 avec les drivers Nvidia !!:

/usr/share/X11/xorg.conf.d/50-card.conf

Hello again. The file /usr/share/X11/xorg.conf.d/50-card.conf does not exist. Do I create it?

[strodown]

@chris256 yes

[chris256]

@strodown It seems that this folder is read only (nano says [ Error writing /usr/share/X11/xorg.conf.d/50-card.conf: Read-only file system ]). I tried mount -o remount, rw /usr/share/X11 but I have error mount: mounting rw on /usr/share/X11 failed: Invalid argument (sorry I am not very skilled at this)

[chris256]

@chris256 Sorry, mount -o remount,rw / did the trick

[strodown]

@chris256 nn only mount -o remount, rw /

[strodown]

@strodown no pb

[chris256]

@strodown I also confirm that file libglx.so.410.73 is missing so I dit the instruction that you asked. I am rebooting right now...

[chris256]

@strodown After reboot I have Booting Recalbox forever on screen so I rebooted in verbose mode and I have xinit : giving up unable to connect to X server: Connection refused server error. Here is the log.

In the directory I have those files:
lrwxrwxrwx 1 root root 16 Jan 20 20:49 libglx.so -> libglx.so.410.73
lrwxrwxrwx 1 root root 29 Nov 22 14:17 libglxserver_nvidia.so -> libglxserver_nvidia.so.410.73
lrwxrwxrwx 1 root root 29 Nov 22 14:17 libglxserver_nvidia.so.1 -> libglxserver_nvidia.so.410.73
-rw-r--r-- 1 root root 14997128 Nov 22 16:14 libglxserver_nvidia.so.410.73

[strodown]

@chris256 delete the 50-card.conf file I can not help anymore because libglx.so.410.73 is not present in this driver version. desolate for the moment it will be necessary to wait the time that I create the new image on the last beta in date still thanks for your tests

[chris256]

@strodown OK. Top bad. I’’try to check this topic regularly. If I can be of any help, please tell me!

[Zeke]

Un grand merci à toi strodown...super taf !

Pour ma part je suis agréablement surpris du résultat vu ma config :

CM : MSI X399 SLI Plus
CPU : AMD Threadripper 1900X
RAM : 4x8Go Corsair Vengeance LPX 3200Mhz
GPU : EVGA GeForce 1060 6Go

J'ai peu le temps de tester ce soir mais j'affiche ES sur ma TV sans problème, pas de lenteur...et les petits plus de la bêta avec la nouvelle manette reconnue pour configuration immédiate. Il n'y a plus le bug du clavier invisible. Pour le moment RAS...c'est mon fils qui va être heureux

[strodown]

@zeke good job merci du retour comme jeux test je propose zelda wind waker sur game cube
si tu peut vérifier si les FPS sont stable il faut activer l’option dans le menu de dolphin hotkey et R2