Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[vincent-84]

@OyyoDams
since the last release, ES always crash after the introductive video (black screen with the version of the release).
I've try with a direct upgrading (from ES) first, and then I reflash my SD card with the same result.

Any idea about that issue ?

[chris256]

Bonjour à tous !
Petit retour d'expérience sur PC. Je n'ai pas trouvé de lien de téléchargement direct pour la beta pour X86_64. Du coup j'ai téléchargé ici la dernière version stable :
https://archive.recalbox.com/v1/upgrade/x86_64/recalbox.img.xz?source=install
Le démarrage se passe bien. Ensuite, j'ai modifié comme suit le recalbox.conf :
updates.type=https://review-master-slwsz0-archive-review-prod.recalbox.com
Une mise à jour était alors proposée dans le menu update. Je l'ai lancée. Elle s'est téléchargée mais le problème est qu'au redémarrage, j'aboutis sur un écran noir au lieu d'arriver sur ES. La machine n'est pas visible sur le réseau donc je n'ai pas pu faire d'archive. Du coup j'ai redémarré avec le bouton reset et relancé en mode verbose. Voici ce qui s'affiche :

J'ai fait aussi une archive avant le reboot (sur la version stable donc) :
https://file.ac/SH0iSHaU5rE/

Si quelqu'un a une idée... ou un lien de téléchargement direct de la beta X86_64, je suis preneur. Merci d'avance !

[vincent-84]

@vincent-84 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@OyyoDams
since the last release, ES always crash after the introductive video (black screen with the version of the release).
I've try with a direct upgrading (from ES) first, and then I reflash my SD card with the same result.

Any idea about that issue ?

that's came after coping my old bios and roms folders

[serpi]

I had an installation with the full beta image on 3B+..
Now, with the update, I made a new install and applied the update.
It seems, the scarper doesn't save any data (scraping works), there where no problems with the old image before applying the latest Update.
Is this a known problem or anything I can do, to make it work?

[chris256]

Bonjour à tous ! Quelqu’un a une piste pour mon problème un peu plus haut ? La version PC stable s’installe mais quand je passe à la beta, le boot n’arrive pas jusqu’au bout et j’ai un écran noir... je me suis planté dans la procédure de MAJ ? Il y aurait un lien direct vers l’image PC de la beta ? Merci d’avance !!

[Gaetan]

@chris256 le lien direct est dans la description, le premier post

[chris256]

@gaetan Merci pour ta réponse mais le lien direct semble mener à la version rpi3 uniquement et pas à la version X86 64 bit que je cherche. Je l’ai relu plusieurs fois mais je suis peut-être passé à côté ?

[deo1789]

~~Hi,

I'm trying to upgrade from 1st beta but /recalbox/scripts/recalbox-upgrade.sh can't find the upgrade files, and I can't figure how to reconfigure the target URL (not proficient with script editing

Linux RECALBOX 4.14.62-v7 #1 SMP Fri Aug 24 00:07:55 UTC 2018 armv7l GNU/Linux

recalbox.log:
[ 385.38] ------------ Will process to a https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com upgrade ------------
[ 385.54] Unable to get headers for http://archive.recalbox.com/updates/v1.0/https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com/rpi3/boot.tar.xz

In Recalbox.conf:

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=0

Update type : default to stable

updates.type=https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com
#updates.type=stable

And I can access internet from the PI3 B+ (wget with the direct URL works):

wget https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com/v1/upgrade/rpi3/boot.tar.xz?source=install

--2018-12-02 08:40:41-- https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com/v1/upgrade/rpi3/boot.tar.xz?source=install
Resolving review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com (review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com)... 91.121.112.87
Connecting to review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com (review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com)|91.121.112.87|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6278736 (6.0M) [application/octet-stream]
Saving to: 'boot.tar.xz?source=install'

boot.tar.xz?source=install 100%[===================================================================>] 5.99M 1.29MB/s in 4.7s

2018-12-02 08:40:46 (1.27 MB/s) - 'boot.tar.xz?source=install' saved [6278736/6278736]

Any idea?

regards,
philippe](url du lien)

[deo1789]

EDIT from above: something must have happened, no change on my side but update is now downloading (from emulationstation GUI)...

[OyyoDams]

Direct link for X86/64 (re)added on 1st post

[chris256]

@oyyodams Thanks for the link ! I'm going to test it right now.

[chris256]

@chris256 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@oyyodams Thanks for the link ! I'm going to test it right now.

So I tested. There is what I noticed so far :

• no sound through HDMI, whatever I choose in the sound menu
• when I select Quit/shutdown, I have 'Booting recalbox' but it does not stop. I stop then through the web manager.
  Too bad, it was almost good...

And when I do Launch script on the web manager to generate a support archive, the wheel keeps turning and nothing happens. Moreover, I loose network connection to Recalbox if I do this.

If anyone is OK to have a look at it, I copied the logs contents from the web interface to a text file. Here are the lines that may be relevant :

• in messages : input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
• in es_log : lvl0: VolumeControl::init() - Failed to find mixer elements! - lvl0: VolumeControl::init() - Failed to find mixer elements!

On the good side, I tried one n64 game and it runs very fine... Thanks for the work anyway !!

[Ignus Fast]

Interestingly, this version fixed my issues with PSX games (glitching, poor frame rate), but N64 games no longer load at all, and I have the same HDMI audio issue previously mentioned.

In es log, I see the following, but N64 games (using both emulators) just drop right back to es.

lvl2: Configure emulators command : -p1index 0 -p1guid 030000004c0500006802000011810000 -p1name "Sony PLAYSTATION(R)3 Controller" -p1nbaxes 6 -p1devicepath /dev/input/event14
lvl2: Controllers config : -p1index 0 -p1guid 030000004c0500006802000011810000 -p1name "Sony PLAYSTATION(R)3 Controller" -p1nbaxes 6 -p1devicepath /dev/input/event14
lvl2: python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc -p1index 0 -p1guid 030000004c0500006802000011810000 -p1name "Sony PLAYSTATION(R)3 Controller" -p1nbaxes 6 -p1devicepath /dev/input/event14 -system n64 -rom /recalbox/share/roms/n64/Cruis'n\ USA\ (USA)\ (Rev\ B).z64 -emulator default -core default -ratio auto
lvl2: Creating surface...
lvl2: Created window successfully.
lvl2: Added known joystick Sony PLAYSTATION(R)3 Controller (instance ID: 0, device index: 0)
lvl2: SDL AUDIO Initialized

Sorry, one last thing - about half the time, my USB keyboard won't come up when es starts up. That's also new to this version. The PS3 controller always works, though.

[chris256]

@ignus-fast Hi ! Are you using X86 version or RPI ? Because n64 runs fine for me on this version. About HDMI audio, what is your problem ? On my side I don’t have sound through HDMI...

[Ignus Fast]

I apologize for not being specific - this is the x86 version. I'm still running the previous version on my Pi because I don't have a backup of that drive yet - figured I'd experiment with the PC.

I see 6 available devices for audio - 2 chipset, and 4 HDMI. But none of them produce any sound, and all constantly reset the ES volume to 0.

I'll have to back up my Pi drive so I can get physical with it.

[chris256]

@ignus-fast Thank you for your feedback about audio. I have exactly the same issue as you do. Sorry I can’t help you but may be a developer will have a look at it. Have a nice day!

[OyyoDams]

@toniosj @moguai I've just tested NAS access over wifi on the latest build, and I can confirm it works.

Here is my /boot/recalbox-boot.conf:

sharedevice=NETWORK

sharenetwork_smb1=SHARE@192.168.1.94:Games/recalbox:username=recalbox,password=******

[chris256]

@oyyodams @toniosj @moguai For those having problems, it may be related to the smb version. You could try adding vers=1.0 at the end of the line, for instance:

sharedevice=NETWORK
sharenetwork_smb1=SHARE@192.168.1.94:Games/recalbox:username=recalbox,password=******,vers=1.0

[lhari84]

@chris256
Just because I'm interested using this feature in future:
Which SMB versions are supported? I've disabled SMB1 on my NAS for security reasons, is SMB2 or even SMB3 supported too?
Thanks

[vincent-84]

@vincent-84

@vincent-84 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@vincent-84 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@OyyoDams
since the last release, ES always crash after the introductive video (black screen with the version of the release).
I've try with a direct upgrading (from ES) first, and then I reflash my SD card with the same result.

Any idea about that issue ?

that's came after coping my old bios and roms folders

@OyyoDams
this is my issue with this last release (when I try to start ES from root) :

"#lv10: /recalbox/share/system/.emulationstation/es_system.cfg files does not exist! [je confirme]
lv10: System "favorites" is missing name, path, extension, or command!
terminate called after throwing an instance of 'boost: : exception_detail: :clone_impl <boost: :exception_detail: :error_info_injector<boost: :property_tree: :ptree_bad_path> >'
what(): No such node (gamelist)