Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[Gaetan]

@hoyohoyo before updating you have to change the recolbox.conf as it's said in the first post.
If you don't, you'll brick your recalbox. If you do it like it should be done, you'll have a normal update and everything will be ok.

[Substring]

@hoyohoyo have you read the very first post stating this is experimental, and you should do this on a backup SD ?

[glukkkk]

C'mon, testers! Hurry up My Pi3+ board inside the NesPi Case is ready and waiting for you!

P.S. I'm joking, you do everything great! Make the release build as much stable as possible.

[CedrickM]

@noktambule Thank you for your help, i managed to start the recalbox again with the update. Nevertheless, i still try to add roms, and they did not appear in my recalbox "interface" whereas it appear in my recalbox roms directory. Has someone an idea ?

[Simon DA SILVA]

Hello,

I just installed Recalbox beta on my 3b + but I have a problem, no game starts when I wander through the menus (out emulator confused), I tried several times, formatting cleanly (deleted partition, long formatting , etc.), if anyone has an idea to help me?

Thank you !

[Gaetan]

@simon-da-silva you have to remap your controller first

[Simon DA SILVA]

@gaetan yeah just after i wrote my question i,ve looked at that, it's work thx dude !

[Gaetan]

@simon-da-silva have fun

[cazeysan]

For everyone, if you want to do some serious tests on Recalbox for Raspberry Pi 3b+, you have to read the first post in this topic.

[james-lord]

Testing with a bluetooth xbox one controller and it will not pair, has anyone got this to work with the builtin BT on the Rpi 3+?

[MarbleMad]

Mon petit retour d'expérience sur l'install de recalbox beta sur pi3b+ dans un boitier snes Retroflag

• Reboot indéfiniment après l'écran d’accueil d'EmulationStation quand on utilise une alimentation trop faible
• Date des fichiers au 01/01/1980 20:00 : pas gênant mais bizarre
• Pas de dossier share/overlays/ d'origine : ça serai interessant d'en créer un avec un fichier lisez-moi dedans qui renvoi a la page wiki d'installation des overlays de jeux.

Voila pour l'instant, je continu mais tests

[mariob]

I just installed Recalbox beta on my 3b+ but I have a problem with a video plugin not running in kodi. This IPTV plugin run very well on my 2 rpi3B (not +) with libreelec and recalbox and also on my odroid xu4 under android 8.1. On the B+ it tells me to look in the log file to see the error description. Here it is: 23:31:27.961 T:1925739120 ERROR: GetDirectory - Error getting plugin://plugin.video.xxxxxxxx/
23:31:27.962 T:1925739120 ERROR: CGUIMediaWindow::GetDirectory(plugin://plugin.video.xxxxxxxx/) failed
This doesn't occur on my B+ with a retropie image including kodi 17.6.
I have well mapped my controller before anything and the retrogaming is ok, ssh trough my wired network is ok, vido sources are ok in kodi.
Any idea ?
Thank you.

[Choum]

Hello,

With this beta image (on a new installation on 3+), will it be possible to return to the stable branch when this beta will end or we will have to reinstall the recalbox with a new image ?

[Alex_123]

Hello, I have downloaded the beta version and tested on my Raspberry 3B+:

Works:

• Xbox360 wireless gamepad: Gamepad remapped, it works well in Recalbox menus and games launched.

Not Works:

• Gamesir 3gs wireless gamepad: Gamepad remapped, it works in Recalbox menus but it does not respond in games launched.

• Retroarch gui menu settings are not saved: I access to Retroarch gui (hotkey+b) and change in Settings->Video->Bilinear filter from On to Off but this change is not saved, after restarting On value go back.

[SumOfOneInteger]

@mariob There's been a few other posts here (including one I made three weeks ago.) No responses yet. Just keep monitoring this thread.

[Substring]

@marblemad nothing you mentionned is new to this beta

@james-lord no one said their was any improvements on the xbox one controllers. If you want to give it a try, see here

@mariob no idea for that kodi problem

@Choum no you can't switch back to stable, changes are way too diffferent. That's why i said one must use a dedicated sd card

@Alex_123 i'm not sure the gamesir 3gs ever worked. Does it work fine on the stable ? For the RA settings, some are overwritten at each new launch. I don't think there is any change between the stable and the beta here

[james-lord]

@substring Thanks for your help in the Discord, I now have one of the xbox one pads up and running.

[Choum]

The md5 verification on the webpage (bios tab) for ATARIOSA.ROM
eb1f32f5d9f382db1bbfb8d7f9cb343a do not work.

[Injall]

Bonjour,

La PSP ne fonctionne absolument pas. Voici le fichier : https://file.ac/HCaQA0otHqA/

[JOBARE]

Hi.

Thank's for your work.

Since the recalbox 4.1, BlueMsx core had been patched to map F1/F2/F5 keys on the first gamepad.
It seems that we lost keys mapping.

I tested applying following commits as indicated :

1st update (fix): https://review-master-slwsz0-archive-review-prod.recalbox.com
2nd update (master of Pi3b release) : https://review-507-b*mp-b-0jn0c0-archive-review-prod.recalbox.com

I notified this issue as comment on last Gitlab merge dedicated to fix recent BlueMsx core problem : https://gitlab.com/recalbox/recalbox/merge_requests/385

Could you please have a look before releasing stable version ?..

Thank's !.