Freeplay CM3 GBA clone Kit.

[Dragu]

@Substring
So quick ? Thanks alot for your work, I will give feedback in short.
In between one picture from my testing place, Hub with keyboard and Wifi stick, HDMI mini to HDMI-HDMI to VGA adapter and power supply

[Substring]

@dragu sexy !

[Dragu]

@Substring
I am on the way to reload the system after the crash. Also concerning mk_arcade_joystick_rpi, there is some confusion about the file in /etc/modprobe.d
Described in github is mk_arcade_joystick.conf, but it seems that mk_arcade_joystick_rpi.conf is the good one, as what you read in the web. Logical, no ?

[Dragu]

@Substring
There is no crash anymore with map=5 in recalbox.conf. Concerning mk_arcade_joystick_rpi.ko, I tried out with both versions of the .conf file in /etc/modprobe.d, but evtest fails to find a controller.

[Substring]

@dragu check with lsmod if it's loaded + don't load it through recalbox.conf, it doesn't take all parameters. rmmod the ko, then manually modprobe it with your parameters

[Dragu]

@Substring
Hi friend, in lsmod the driver is not existing (was there before) and with modprobe I have following feedback

# # modprobe mk_arcade_joystick_rpi map=5
# modprobe: can't load module mk_arcade_joystick_rpi (extra/mk_arcade_joystick_rpi.ko): Invalid argument

[Dragu]

@Substring
Some more small info. If I put him map=1 (I suppose same with 1,2) in recalbox.conf, the driver is loaded correctly as with the version before and also same behavior.

[Substring]

@dragu have a look at /recalbox/scripts/recalbox-config.sh line 448 for loading the module and add your parameters

[Dragu]

@Substring
Hi, I just made some tests. So if I define in recalbox.conf map=5, he just dont load mk_arcade_joystick_rpi.ok and if I put there map=1, he load object but also with the standard gpio definition.
As you told I changed in recalbox-config.sh the following

if [ "$command" == "gpiocontrollers" ];then
    command="module"
    mode="load"
    extra1="mk_arcade_joystick_rpi"
    extra2="map=1,2"

to

if [ "$command" == "gpiocontrollers" ];then
    command="module"
    mode="load"
    extra1="mk_arcade_joystick_rpi map=5 gpio=4,17,6,5,19,26,16,24,23,18,15,14,20,-1"
    extra2="map=1,2"

I tried with and without map=5, but perhaps I made a mistake here ?
Anyway recalbox.conf seems to have bigger influence, as with map=5 there, he even dont load the object.

[Substring]

@dragu better summon @ian57 here, he made the tests with gpio remapping

[Dragu]

@Substring
@ian57 was last here 12 days ago, so I return to my cave
With PiGRRL the problem of the custom GPIO may also exist.

[Substring]

@dragu but i can get in touch with him almost whenever i want

[Dragu]

@Substring
I have the impression that this object dont accept arguments for map other as 1,2.
I am always somewhere astonished about in general software in Linux, as parameter files seems to be an acknowledged territory. I was about long time ago making with my team software for bigger companies, it was never software that had constant values inside that could at a certain moment change. By hardware or environnement.

[Dragu]

@Substring
Other thing on the schedule was the 3.2" waveshare tft screen, and this was a straight, because not necessary to use ED's driver, the waveshare32b.dtbo in /boot/overlays is working fine.

[Dragu]

Something else that I found out about this tiny waveshare displays, there are too much parameters in the description
If you just limit to the 3 not out commented, you have lcd screen + hdmi output all together, It seems to me that somebody was already asking this.

#Waveshare 3.2 TFT Screen
#same resolution for hdmi and tft
#hdmi_force_hotplug=1
#hdmi_group=2                
#hdmi_mode=1                 
#hdmi_mode=87                
hdmi_cvt=320 240 60 1 0 0 0
dtparam=spi=on              
dtoverlay=waveshare32b:rotate=270,speed=82000000,fps=60

[ian57]

@dragu of course it is working fine, we put it here for this

[ian57]

@dragu I have a lot of work right now... so I cannot answer whenever I want, sorry.

For your problem, you need to pur the gpio config right in a conf file because the recalbox scripts do not take into account the gpio parameter from the recalbox.conf config file.

Add the module in /etc/module.conf file

snd_bcm2835
uinput
usbhid
mk_arcade_joystick_rpi

and create /etc/modprobe.d/mk_arcade_joystick.conf file with your parameters :

blacklist ads7846 
#options mk_arcade_joystick_rpi map=1,2
# gpio with button order: Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl
options mk_arcade_joystick_rpi map=5 gpio=4,17,6,5,19,26,16,24,23,18,15,14,20,-1

It should work for now...
the next release of recalbox should handle the gpio parameter in recalbox.conf

[Dragu]

@ian57
Be assured that I appreciate your and all other work in this non-profit organization for rotten gamblers.
I will test in the next hour, the GBA becomes adult only when it sounds through the speaker, "Shake it baby"

[Dragu]

@ian57
I just tested, but he still dont want to load the driver. The file in /etc/modprobe.d was already existing before, but also he refused already than to load the driver by modprobe. That seems the biggest problem, but when I put him map=1 or map=1,2 in recalbox.conf, he load the driver without other order, but with the basic gpio as always.

modprobe mk_arcade_joystick_rpi

modprobe: can't load module mk_arcade_joystick_rpi (extra/mk_arcade_joystick_rpi.ko): Invalid argument

[Substring]

@dragu once again : the current recalbox-config.sh won't handle anything behind map=5 from the recalbox.conf. That's why ian suggested to manyally force the load ofnthe module. This also mean you must disable it in the recalbox.conf