
Posts made by mazur
-
RE: Loss of PS3 control pairing when turning off Recalbox
@langelotti1 Strange.. I have same PS3 controller and i need only to press home button again on each boot..
But i had some issues with generic bluetooth dongle, changed to a Orico dongle, ok now..
Maybe you can try another bt dongle.
-
RE: Loss of PS3 control pairing when turning off Recalbox
About pairing again, you mean connect usb cable again? doing the full pair procedure again, or only need to press PS3 Home button?
-
RE: Samsung Evo 64 SD card isn't booting up
Hi, you must format to FAT32, but normal tools don't work for that SD size.. you must use a special tool like that: http://rufus.akeo.ie/
(Only for Windows) -
RE: Can't Connect
@fegemo I think is really some ISP problem.. because i use GVT/VIVO too.. and i get no connection, but i can connect with 4G like you.
I tried today with last RecalBox (Unstable 4.1.0 build 63), same problem again..
-
RE: Can't Connect
@Substring , please check:
# ifconfig eth0 Link encap:Ethernet HWaddr B8:27:EB:79:9E:06 inet addr:192.168.25.4 Bcast:192.168.25.255 Mask:255.255.255.0 inet6 addr: fe80::ba27:ebff:fe79:9e06%1994427092/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:158 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15499 (15.1 KiB) TX bytes:24591 (24.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1%1994427092/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) # # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.25.1 0.0.0.0 UG 0 0 0 eth0 192.168.25.0 * 255.255.255.0 U 0 0 0 eth0 # # /etc/resolv.conf search domain.name # eth0 nameserver 192.168.25.1 # eth0 # /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf # ping recalbox.com PING recalbox.com (217.70.184.38): 56 data bytes --- recalbox.com ping statistics --- 75 packets transmitted, 0 packets received, 100% packet loss
I changed resolv.conf and interfaces but that files keeping returning to the default DHCP settings, already tryed to make them readonly, no sucess..
-
RE: Problemas com a conexão à internet
@azvarel Pode ser mesmo, vou tentar zerar essa bomba da Dlink e ver oque acontece..
-
RE: Problemas com a conexão à internet
Acho que o problema é com a internet da Vivo.. aqui dá a mesma coisa.. pingando no RP3 ou no PC dá o mesmo erro, não encontra o retrobox.com
Mas se eu tentar usando a rede da Claro ou Oi por exemplo, ele funciona!
-
RE: Can't Connect
@Substring Yes i tryed auto and static settings.. on PC i can't ping recalbox.com too.. maybe some router setting?
-
RE: Can't Connect
Thats the local IP (assigned by DHCP).. I think, maybe sobe ISP issue.. Still looking for a solution..
-
Can't Connect
Hi,
I just installed Recalbox 4.0.0 and i can't connect to network (cable and wifi).
It give me IP, and i can access it from browser and windows network, can upload roms.. but can't use SCRAPER ou UPDATE.Looking at the logs, looks like it cant ping recalbox.com:
--- recalbox.com ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
PING recalbox.com (217.70.184.38): 56 data bytesI tried to ping it at windows and get same error, but i can ping www.recalbox.com
Any idea what is hapenning? i tried many things, like making static IP.. same error
Please look the screenshot: