Posts made by LoneSt4r

Thanks @Zing for your reply.

• I was using the latest official version from the official website.
• I was sure that using "dd" was OK since the files were on the SC card and the system booted OK.
• Enlarging the partition made sense to me, but it was the cause of my problems.

I can now see the new partitions were created and the CPU is behaving normally. Thanks!

I still have to adjust the CRT display and configure my gamepads which are still not working, but I should be able to fix those using the standard documentation.

Thanks for pointing me in the right direction!

Hello!

I have been a Recalbox user for many years now. I thought I should give 7.0.1 a try.

• Formatted the SD card
• Used "dd" on Linux to copy the image to the SD card
• Enlarged the partition to fill the whole SD card

First Issue

The boot sequence completed without a problem. However, after getting the "The system is up-to-date" notice, I have no way to click on OK to continue. I tried with a USB gamepad, a USB mouse, and a USB keyboard.

Is there any way to clear this screen and continue?

Second Issue

When I SSH into the Pi, I see the CPU is always running at 100% with the same process is always the top CPU user:

"python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc"

• Clicking on "Launch Script" in the web GUI "Support" page results in a "Command failed" result.
• Clicking on "Stop ES" liberates the CPU.
• Clicking on "Restart ES" brings the CPU back to 100%.
• The Raspberry Pi has been running for 8 hours now, so it is no longer just a matter of waiting for the boot to settle.

I tried running the recalbox-support.sh script from SSH. This is what I get:

lspci: /sys/bus/pci/devices: No such file or directory
./recalbox/scripts/recalbox-support.sh: line 54: aplay: command not found
./recalbox/scripts/recalbox-support.sh: line 55: glxinfo: command not found
./recalbox/scripts/recalbox-support.sh: line 56: xrandr: command not found
./recalbox/scripts/recalbox-support.sh: line 57: xrandr: command not found
./recalbox/scripts/recalbox-support.sh: line 58: connmanctl: command not found
./recalbox/scripts/recalbox-support.sh: line 59: connmanctl: command not found
BusyBox v1.31.1 (2020-10-16 08:14:33 CEST) multi-call binary.

Usage: rm [-irf] FILE...

Remove (unlink) FILEs

	-i	Always prompt before removing
	-f	Never prompt
	-R,-r	Recurse
evtest: No such file or directory
device node not found
error: failed to read gamecontrollerdb.txt: Invalid RWops
gzip: write error: No space left on device
Reporting zip creation failed

The obvious answer might be that the Raspberry Pi 1 is getting too old, but since this is to use with a CRT, I don't have much choice.

Does anyone have any idea what I could try to make this setup work?

Thanks!

Hello!

I started playing with Recalbox last night and I had the same issue. global.videomode is already set to default.

What else could it be?