Same issue with Recalbox 7.0.1 with rp3.

@RetroVadus Perfecto! Gracias!

@RetroVadus Gracias!!

@RetroVadus Podrías hacer que el de "Ultimos jugados" ponga en su lugar "Recientes"? En mi configuración "Ultimos jugados" queda muy largo y solo veo "Ultimos Jug"...

Y si de paso el de Favoritos pudiera estar también en naranja, para que quede a juego con los demás, que ahora solo está en negro...

Gracias!

@Kaos Podrías compartir las bios? O esta feo pedirlas por aquí? Me están dando problemas las de dreamcast, y las de playstation, como a ti... Bueno y unas cuantas más, pero poco a poco...

@acris same problem here!

Only 1 Player detected, as THT 1P arcade Controller... Version 6.1.1 detects 2 players.

If i put this code in the cmdline.txt it works again, detecting 2 players, but i hope this will not be necesary in a furute update...

usbhid.quirks=0x16c0:0x05e0:0x040

Support file:

https://transfer.sh/xhAzh/recalbox-support-0288f6bd-5844-a03f-ed7e-1efc3085629a.tar.gz

Hi!

This is from Recalbox 6.1.1, i hope is the same that if i run the command "sdl2-jstest --list" in Recalbox 7.0...

I have to go back because the controllers didn't work so well, only one player detected.

I managed to fix te second player bug putting this line in the cmdline.txt: usbhid.quirks=0x16c0:0x05e0:0x040. With that, I can have 2 players, but hotkey isn't working properly and i have to power-off the pi, can't exit the games...

Found 2 joystick(s)

Joystick Name:     'THT 1P arcade controller THT 1P arcade controller'
Joystick Path:     '/dev/input/event2'
Joystick GUID:     03000000c0160000e005000011010000
Joystick Number:    0
Number of Axes:     2
Number of Buttons: 12
Number of Hats:     0
Number of B***s:    0
GameController:
  not a gamepad
Axis code  0:    0
Axis code  1:    1
Button code  0:   288
Button code  1:   289
Button code  2:   290
Button code  3:   291
Button code  4:   292
Button code  5:   293
Button code  6:   294
Button code  7:   295
Button code  8:   296
Button code  9:   297
Button code 10:   298
Button code 11:   299

Joystick Name:     'THT 1P arcade controller THT 1P arcade controller'
Joystick Path:     '/dev/input/event3'
Joystick GUID:     03000000c0160000e005000011010000
Joystick Number:    1
Number of Axes:     2
Number of Buttons: 12
Number of Hats:     0
Number of B***s:    0
GameController:
  not a gamepad
Axis code  0:    0
Axis code  1:    1
Button code  0:   288
Button code  1:   289
Button code  2:   290
Button code  3:   291
Button code  4:   292
Button code  5:   293
Button code  6:   294
Button code  7:   295
Button code  8:   296
Button code  9:   297
Button code 10:   298
Button code 11:   299

@Angelcdk it's the raspberry pi 3 version, by the way!

@Angelcdk This is the link that send me a friend, it will work a few days more:

https://wetransfer.com/downloads/bd89b87fe55933ce86ba1f3cd28a57f220201003112347/0698452a884ddaf3e4ed571fabac37cc20201003112409/d5df88

@Paulska Sorry, i try anything, but it just keep resetting the config...

I got the 6.1.1 version from a friend and go back to it, all is working properly again!

@acris Yeah, on boot i get sound, but the file get reseted, so in next boot i got no sound...

Any ideas? I think i may go back to 6.1.1 for now, if i get the image...

It seems that the recalbox.conf file is reseting to a default version after reboot, this is what I see in Cyberduck:

When I modify it, the date was the current date, but after reset the date is 1/1/80

@acris edited in the computer with notepad++, same result, first time it works perfect, after restart, sound only work 1-2 seconds of the intro video...

@acris

In recalbox.conf i edit this:

------------ C - Audio ------------

Set the audio device (auto, hdmi, jack)

audio.device=Default output

And put this:

------------ C - Audio ------------

Set the audio device (auto, hdmi, jack)

audio.device=auto

It works, but after reboot, it's mute again and in recalbox.conf is the initial configurtion again...

------------ C - Audio ------------

Set the audio device (auto, hdmi, jack)

audio.device=Default output

@acris I use recalbox manager to configure it via web and it works, but on the next reboot it wasn't working anymore... I'm gonna try recalbox.conf.

@acris Sorry, audio jack, i'm stupid... I try al the options in the config, still no sound.

I think it isn't xin-mo but a clon, i had to use usbhid.quirks=0x16c0:0x05e0:0x040 instead of usbhid.quirks=0x16c0:0x05e1:0x040 (mine has a 0 instead of a 1 at the second identifier)

Sound hdmi. It works about 1-2 seconds on start and after that silence...

Someone must have the 6.1.1 clean image, i just want to go back until 7.0.1 or something that fix this issues...

I magange to fix te second player bug putting this line in the cmdli.txt: usbhid.quirks=0x16c0:0x05e0:0x040. Now i can have 2 players, but hotkey isn't working properly and i have to power-off the pi, can't exit the games...

Hi!

I need the download link for Recalbox 6.1.1 for raspberry pi 3.

I update to version 7.0, but he xinmo controller doesn't work for the second player, and the sound doesn't work, so i want to go back to the previous version, but i can't find it anymore...

Thanks!

Ups , sorry!

Was an empty drive, can't be full. Finally i did the copy manuallly, witout the script, and it works...

Hi!

I´m doing the steps of this tutorial Use an external usb storage device on recalbox (EN)

I´ve tryed formatting the usb in all the formats (Fat32, ntfs, ext4), but can't make it work...

This is one of the errors:

....
roms/atari2600/images/Zoo Keeper (USA) (Proto).png
rsync: write failed on "/media/usb4/recalbox/roms/apple2/_lisezmoi.txt": Input/output error (5)
rsync error: error in file IO (code 11) at receiver.c(393) [receiver=3.1.2]

What can I do?

Thanxs!

(Recalbox 4.1 stable)