@voljega

Thank you so much, you killed the charade.
on this line in es_systems.cfg I just put the emulator name sub-replacing with% SYSTEM%

<command> python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc% CONTROLLERSCONFIG% -system fba_libretro -rom% ROM% -emulator% EMULATOR% -core% CORE% -ratio% RATIO%% NETPLAY % </ command>

you do not know how much time I lost in it looking in forums and topics, and I saw nowhere when it was explained that this parameter had to be changed.

Thank you very much for your help.

@bkg2k
Thank you very much for your attention and help. I even looked at the log and had not identified anything strange, but after reading @voljega's instructions and making the change on the command line, I saw that the log contained a part that was -system cps3 -rom

I was able to solve the problem.
Thank you very much for your help.

@bkg2k
Hi, I'm also having the same problem @tylerdurden67
its I change the name of the system, the recalbox recognizes all roms, however I can not execute any of them. none works.
I'm also trying to split the FBA_LIBRETO into 3 CPS1 CPS1 and CPS3 systems.

if I leave everyone with the name fba_libreto, only 1 system is recognized and runs the roms perfectly, but if I rename the systems for CPS1, cps2 and cps3, all 3 are recognized, but none are executed.

Could you help me with this?

@mrseguin said in Thème Mukashi:

@lauderneto everything was done also amateurally in our side too:)
Because we don't want to put too many systems because of the limited vram of the RPI I don't think we will create new theme and so separate CPS1 CPS2 .... Today because I am visiting AirDream in Japan we worked a little together on atari5200 and we have done it(bg bg2 music) (link below) and we will work later on the not yet included system that will come in beta. By the way can you give me link where its precised about the new addons systems?
As for svg I managed to convert them through Inscape(free programs I put in the beginning of the Mukashi Theme post)
I have to say it is a bit hit and miss because I don't master at all the program but I managed not really knowing how ! But this is the program to go with with svg!
Its possible some of our logo are in png in the theme because svg was a bit complicated to find or to convert.
Because we didn't download the beta of course yet we can't test it....

It was very good, congratulations.
when I am at home I will lower and discard what I have done.

the beta system where it contains the new systems can be found at this link. https://forum.recalbox.com/topic/15010/testers-wanted-major-system-upgrade-pi3b-kodi-17-and-much-more
  I'm using it as main and it's working normally.

in my case as I use the raspberry pi3b +, I am limited to using systems like WII, 3DO, PSP and others that do not run. so I do not think I will have problems with VRAM because I do not use those systems.

I'm still thinking of neither using computer games like atari st, atari 800, commodore 64, amistrad cpc.

The only thing I think of using is my friend, because it was part of my life.

I also think about putting the Super Nintendo MSU-1.

@mrseguin
everything was done amateurally in a 3D paint. so I did not add shade or anything, but it serves as an idea for you in the future to continue with the project and do for those systems.

I took advantage of its past themes folders: fba_libretro was copied to CPS 1 2 E 3, Atari 7800 to atari 5200. only the chanel F that looked for a different wallpaper,

mrseguin Today the Christmas beta version of the recalbox contains those 5200 and chanel F systems and is normally running.

I just made these backgrounds to fill a shortage that for me from cps 1 2 and 3 that I really like them apart.
as I also have separate roms from pc engine (japan) and eturbo grafx (usa) I added as well.

the most problematic is to find SVG files, I searched a lot and those that I found in png and converted to sites or became monochrome, or the system could not read.

Have you done any specific programs with this theme? the only problem I had was to respect the edges of the carousel because they did not know where they were. in cps 1 2 and 3 the covers of the games were a little below the carousel.
well, thank you

Hello, I want to congratulate the creator of this theme. for me one of the best I've ever seen.
as it wanted systems like CPS1, CPS2, CPS3, CHANEL F, TURBO GRAFX16 AND ATARI5200 and unfortunately these did not have. I took the liberty of doing those backgrounds.

I hope you keep working on thema, because it really is one of the best I've ever seen for recalbox.

one thing that would be cool was instead of the information being fixed in BG, could be tags in xml. hence each person would adapt to their language.

thank you very much!


@bkg2k
Thank you very much for your attention and help. I even looked at the log and had not identified anything strange, but after reading @voljega's instructions and making the change on the command line, I saw that the log contained a part that was -system cps3 -rom

I was able to solve the problem.
Thank you very much for your help.

@voljega

Thank you so much, you killed the charade.
on this line in es_systems.cfg I just put the emulator name sub-replacing with% SYSTEM%

<command> python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc% CONTROLLERSCONFIG% -system fba_libretro -rom% ROM% -emulator% EMULATOR% -core% CORE% -ratio% RATIO%% NETPLAY % </ command>

you do not know how much time I lost in it looking in forums and topics, and I saw nowhere when it was explained that this parameter had to be changed.

Thank you very much for your help.

I'm using the christimas beta recalbox for RPI3B +

I'm having a little problem its I change the name of the system, the recalbox recognizes all roms, however I can not execute any of them. none works.
I'm also trying to split the FBA_LIBRETO into 3 CPS1 CPS1 and CPS3 systems.

if I leave everyone with the name fba_libreto, only 1 system is recognized and runs the roms perfectly, but if I rename the systems for CPS1, cps2 and cps3, all 3 are recognized, but none are executed.

Could you help me with this?

below is the configuration I'm doing.

<system>
<fullname>CPS-I</fullname>
<name>cps1</name>
<path>/recalbox/share/roms/cps1</path>
<extension>.zip .ZIP .fba .FBA .7z .7Z</extension>
<command>python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc %CONTROLLERSCONFIG% -system %SYSTEM% -rom %ROM% -emulator %EMULATOR% -core %CORE% -ratio %RATIO% %NETPLAY%</command>
<platform>arcade</platform>
<theme>cps1</theme>
<emulators>
<emulator name="libretro">
<cores>
<core>fba</core>
</cores>
</emulator>
</emulators>
</system>

@voljega said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@lauderneto As already told to @TylerDurden67 can you please respect this subject ?
Your custom modifications and your inability to do them correctly as absolutely nothing to do with the subject of the beta and its bug.
Open a dedicated thread if you want help

sorry, I thought this was a bug, because in previous versions it works normally. as I now have a PI3 +, I can only use this beta. I thought I was doing something wrong, but I saw a colleague from the forum claim the same problem.

I will not bother you anymore