N64 Emulator startet mit 7 Zoll Display nicht



  • Seid gegrüßt ihr da draußen :)

    Ich hab mir vor ein paar Tagen mit einem Raspberry Pi 3 und dem original Display eine kleine Konsole gebastelt. Alles funktioniert wie ich es mir vorstelle, nur der N 64 will nicht. ich starte das Spiel, der schwarze Bildschirm kommt kurz und das wars auch.

    Die Controller Konfiguration hab ich 3 mal geprüft, daran sollte es nicht liegen und durch Google hab ich mich mit den Displaymodes schlau gemacht.

    ich habe zwar folgende Befehle versucht:

    tvservice -m DMT
    tvservice -m CEA

    nur sagt er mir bei beiden 0 Modes vorhanden.

    meine recalbox.conf sieht wie folgt aus:

    /////////////////////////////////////////////////////////////////////////////////////////

    System Variable

    You can configure your recalbox from here

    To set a variable, remove the first ; on the line

    ------------ A - System Options -----------

    Uncomment the system.power.switch you use

    ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
    ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
    ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
    ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
    ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

    Recalbox Manager (http manager)

    system.manager.enabled=1

    Recalbox API (REST)

    system.api.enabled=0

    EmulationStation menu style

    default -> default all options menu

    none -> no menu except the game search menu

    bartop -> less menu, only needed for bartops

    system.es.menu=default

    Emulator special keys

    default -> default all special keys

    nomenu -> cannot popup the emulator menu

    none -> no special keys in emulators

    system.emulators.specialkeys=default

    Show or hide kodi in emulationstation (0,1)

    kodi.enabled=0

    Start kodi at launch (0,1)

    kodi.atstartup=0

    set x button shortcut (0,1)

    kodi.xbutton=0

    Kodi can wait for a network component before starting

    waithost is the ip or hostname that must answer to a ping to validate the availability

    waittime is the maximum time waited when kodi boots

    if waitmode is required, kodi will not start if the component is not available

    if waitmode is wish, kodi will start if the component is not available

    if waitmode is not set or has another value, kodi will start immediately

    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50

    ------------ B - Network ------------

    Set system hostname

    system.hostname=RECALBOX

    Activate wifi (0,1)

    wifi.enabled=1

    Wifi SSID (string)

    wifi.ssid=Sheepnet

    Wifi KEY (string)

    Escape your special chars (# ; $) with a backslash : $ => $

    wifi.key=a5g34j689jre3457ddfgztr456ed43

    Samba share

    system.samba.enabled=1

    Virtual Gamepads

    system.virtual-gamepads.enabled=1

    SSH

    system.ssh.enabled=1

    ------------ C - Audio ------------

    Set the audio device (auto, hdmi, jack)

    audio.device=auto

    Set system volume (0..100)

    audio.volume=92

    Enable or disable system sounds in ES (0,1)

    audio.bgmusic=1

    -------------- D - Controllers -----------------

    Enable support for standard bluetooth controllers

    controllers.bluetooth.enabled=1

    Please enable only one of these

    -------------- D1 - PS3 Controllers ------------

    ##Enable PS3 controllers support
    controllers.ps3.enabled=1

    Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)

    controllers.ps3.driver=official

    ------------ D2 - XBOX Controllers ------------

    Xbox controllers are already supported, but xboxdrv can solve some compatibility issues

    Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)

    controllers.xboxdrv.enabled=0

    Set the amount of controllers to use with xboxdrv (0..4)

    controllers.xboxdrv.nbcontrols=2

    ------------ D3 - GPIO Controllers ------------

    GPIO Controllers

    enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

    controllers.gpio.enabled=0

    mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

    controllers.gpio.args=map=1,2

    DB9 Controllers

    Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

    controllers.db9.enabled=0

    db9 arguments

    controllers.db9.args=map=1

    Gamecon controllers

    Enable gamecon controllers, for nes, snes psx (0,1)

    controllers.gamecon.enabled=0

    gamecon_args

    controllers.gamecon.args=map=1

    XGaming's XArcade Tankstik and other compatible devices

    controllers.xarcade.enabled=1

    ------------ F - Language and keyboard ------------

    Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

    system.language=de_DE

    set the keyboard layout (fr,en,de,us,es)

    ;system.kblayout=us

    Set you local time

    Select your timezone from : ls /usr/share/zoneinfo/ (string)

    ;system.timezone=Europe/Paris

    ------------ G - UPDATES ------------

    Automatically check for updates at start (0,1)

    updates.enabled=1

    Update type : default to stable

    set to unstable at your own risk to get the development version.

    updates.type=stable

    ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

    The global value will be used for all emulators, except if the value

    is redefined in the emulator

    Set game resolution for emulators

    select your mode from the command : tvservice -m [MODE]

    CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

    CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

    use 'default' for using the default resolution

    (string)

    global.videomode=CEA 4 HDMI

    Shader set

    Automatically select shaders for all systems

    (none, retro, scanlines)

    global.shaderset=none

    Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

    global.integerscale=0

    Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

    global.shaders=

    Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

    global.ratio=auto

    Set smooth for all emulators (0,1)

    global.smooth=1

    Set rewind for all emulators (0,1)

    global.rewind=0

    Set autosave/load savestate for all emulators (0,1)

    global.autosave=0

    Enable retroarchievements (0,1)

    Set your www.retroachievements.org username/password

    Escape your special chars (# ; $) with a backslash : $ => $

    global.retroachievements=0
    global.retroachievements.username=
    global.retroachievements.password=

    Set retroarch input driver (auto, udev, sdl2)

    If you don't have issues with your controllers, let auto

    global.inputdriver=auto

    If you do not want recalboxOS to generate the configuration for all emulators (string)

    ;global.configfile=/path/to/my/configfile.cfg

    ------------ I - EMULATORS CHOICES -----------

    You can override the global configuration here

    Here is the snes example

    ;snes.videomode=CEA 4 HDMI
    snes.core=snes9x_next
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=16/9
    ;snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro
    ;snes.integerscale=0

    If you do not want recalboxOS to generate the configuration for the emulator :

    ;snes.configfile=/path/to/my/configfile.cfg

    Default cores for RPi3

    snes.core=snes9x_next
    gba.core=mgba
    mame.core=mame078
    nes.core=fceunext

    NeoGeo emulator

    You can use pifba or a libretro core (fba2x,libretro)

    neogeo.emulator=libretro

    If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

    neogeo.core=fba

    N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

    So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

    If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

    n64.videomode=DMT 4 HDMI

    If you are using a CRT screen, please change the setting above with this one :

    n64.videomode=default

    Configurations generated by Recalbox

    n64.emulator=default
    n64.core=n64

    //////////////////////////////////////////////////////////////////////////////////////////////////////////

    Ich habe den default modes für CRT Monitore versucht aber ohne Erfolg. Vielleicht wisst ihr was zutun ist :(

    Solltet ihr mehr Infos brauchen, einfach schreiben :)

    Danke im Vorraus, Chris



  • ok, hat sich erledigt. auf einmal funktioniert es. hab zwar jetzt das spiel am laufen aber am rechten rand nen dicken schwarzen balken. Heißt das Bild ist nicht zentral sondern klebt am linken Rand aber was solls. Es funktioniert :)


  • Moderator
    Team
    Moderator
    Translator

    @dark-sheep

    Guten Morgen,

    Ist der schwarze Rand nur beim n64 System?

    Grundsätzlich sollte man das Problem mit dem schwarzen Rand per Overscan beheben können.
    https://github.com/recalbox/recalbox-os/wiki/Overscan-Einstellungen-%28DE%29

    Ich bin noch auf der Suche nach weiteren Antworten.....
    Dann editiere ich diesen Post ;)


  • Moderator
    Team

    Hi,

    How is.your screen connected ? Through hdmi ? Does it support 640x480 ? If not, replace n64.videomode value to default in recalbox.conf



  • @abunille Ich werde es nachher wenn ich zuhause bin ausprobieren. Danke für deine Antwort :)



  • @Substring the problem is solved. It's connected to the dpi port and I have set the video mode to default and it works. But the screen sets the emulator to the left side. At the right side is black space. I try the overscan later. Thx for the response :)



  • Andere Frage, weiß jemand wie ich den Display und/oder den hdmi Port nutze? Google sagte mir es gibt keine Lösung :(



Want to support us ?

Join us on :

161
Online

26157
Users

13539
Topics

102703
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.