22 Sept 2017, 16:00

Seid gegrüßt ihr da draußen 🙂

Ich hab mir vor ein paar Tagen mit einem Raspberry Pi 3 und dem original Display eine kleine Konsole gebastelt. Alles funktioniert wie ich es mir vorstelle, nur der N 64 will nicht. ich starte das Spiel, der schwarze Bildschirm kommt kurz und das wars auch.

Die Controller Konfiguration hab ich 3 mal geprüft, daran sollte es nicht liegen und durch Google hab ich mich mit den Displaymodes schlau gemacht.

ich habe zwar folgende Befehle versucht:

tvservice -m DMT
tvservice -m CEA

nur sagt er mir bei beiden 0 Modes vorhanden.

meine recalbox.conf sieht wie folgt aus:

/////////////////////////////////////////////////////////////////////////////////////////

System Variable

You can configure your recalbox from here

To set a variable, remove the first ; on the line

------------ A - System Options -----------

Uncomment the system.power.switch you use

;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

Recalbox Manager (http manager)

system.manager.enabled=1

Recalbox API (REST)

system.api.enabled=0

EmulationStation menu style

default -> default all options menu

none -> no menu except the game search menu

bartop -> less menu, only needed for bartops

system.es.menu=default

Emulator special keys

default -> default all special keys

nomenu -> cannot popup the emulator menu

none -> no special keys in emulators

system.emulators.specialkeys=default

Show or hide kodi in emulationstation (0,1)

kodi.enabled=0

Start kodi at launch (0,1)

kodi.atstartup=0

set x button shortcut (0,1)

kodi.xbutton=0

Kodi can wait for a network component before starting

waithost is the ip or hostname that must answer to a ping to validate the availability

waittime is the maximum time waited when kodi boots

if waitmode is required, kodi will not start if the component is not available

if waitmode is wish, kodi will start if the component is not available

if waitmode is not set or has another value, kodi will start immediately

;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50

------------ B - Network ------------

Set system hostname

system.hostname=RECALBOX

Activate wifi (0,1)

wifi.enabled=1

Wifi SSID (string)

wifi.ssid=Sheepnet

Wifi KEY (string)

Escape your special chars (# ; $) with a backslash : $ => $

wifi.key=a5g34j689jre3457ddfgztr456ed43

Samba share

system.samba.enabled=1

Virtual Gamepads

system.virtual-gamepads.enabled=1

SSH

system.ssh.enabled=1

------------ C - Audio ------------

Set the audio device (auto, hdmi, jack)

audio.device=auto

Set system volume (0..100)

audio.volume=92

Enable or disable system sounds in ES (0,1)

audio.bgmusic=1

-------------- D - Controllers -----------------

Enable support for standard bluetooth controllers

controllers.bluetooth.enabled=1

Please enable only one of these

-------------- D1 - PS3 Controllers ------------

##Enable PS3 controllers support
controllers.ps3.enabled=1

Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)

controllers.ps3.driver=official

------------ D2 - XBOX Controllers ------------

Xbox controllers are already supported, but xboxdrv can solve some compatibility issues

Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)

controllers.xboxdrv.enabled=0

Set the amount of controllers to use with xboxdrv (0..4)

controllers.xboxdrv.nbcontrols=2

------------ D3 - GPIO Controllers ------------

GPIO Controllers

enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

controllers.gpio.enabled=0

mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

controllers.gpio.args=map=1,2

DB9 Controllers

Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

controllers.db9.enabled=0

db9 arguments

controllers.db9.args=map=1

Gamecon controllers

Enable gamecon controllers, for nes, snes psx (0,1)

controllers.gamecon.enabled=0

gamecon_args

controllers.gamecon.args=map=1

XGaming's XArcade Tankstik and other compatible devices

controllers.xarcade.enabled=1

------------ F - Language and keyboard ------------

Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

system.language=de_DE

set the keyboard layout (fr,en,de,us,es)

;system.kblayout=us

Set you local time

Select your timezone from : ls /usr/share/zoneinfo/ (string)

;system.timezone=Europe/Paris

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=1

Update type : default to stable

set to unstable at your own risk to get the development version.

updates.type=stable

------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

The global value will be used for all emulators, except if the value

is redefined in the emulator

Set game resolution for emulators

select your mode from the command : tvservice -m [MODE]

CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

use 'default' for using the default resolution

(string)

global.videomode=CEA 4 HDMI

Shader set

Automatically select shaders for all systems

(none, retro, scanlines)

global.shaderset=none

Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

global.integerscale=0

Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

global.shaders=

Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

global.ratio=auto

Set smooth for all emulators (0,1)

global.smooth=1

Set rewind for all emulators (0,1)

global.rewind=0

Set autosave/load savestate for all emulators (0,1)

global.autosave=0

Enable retroarchievements (0,1)

Set your www.retroachievements.org username/password

Escape your special chars (# ; $) with a backslash : $ => $

global.retroachievements=0
global.retroachievements.username=
global.retroachievements.password=

Set retroarch input driver (auto, udev, sdl2)

If you don't have issues with your controllers, let auto

global.inputdriver=auto

If you do not want recalboxOS to generate the configuration for all emulators (string)

;global.configfile=/path/to/my/configfile.cfg

------------ I - EMULATORS CHOICES -----------

You can override the global configuration here

Here is the snes example

;snes.videomode=CEA 4 HDMI
snes.core=snes9x_next
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0

If you do not want recalboxOS to generate the configuration for the emulator :

;snes.configfile=/path/to/my/configfile.cfg

Default cores for RPi3

snes.core=snes9x_next
gba.core=mgba
mame.core=mame078
nes.core=fceunext

NeoGeo emulator

You can use pifba or a libretro core (fba2x,libretro)

neogeo.emulator=libretro

If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

neogeo.core=fba

N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

n64.videomode=DMT 4 HDMI

If you are using a CRT screen, please change the setting above with this one :

n64.videomode=default

Configurations generated by Recalbox

n64.emulator=default
n64.core=n64

//////////////////////////////////////////////////////////////////////////////////////////////////////////

Ich habe den default modes für CRT Monitore versucht aber ohne Erfolg. Vielleicht wisst ihr was zutun ist 😞

Solltet ihr mehr Infos brauchen, einfach schreiben 🙂

Danke im Vorraus, Chris