N64 Emulator startet mit 7 Zoll Display nicht
-
Seid gegrüßt ihr da draußen
Ich hab mir vor ein paar Tagen mit einem Raspberry Pi 3 und dem original Display eine kleine Konsole gebastelt. Alles funktioniert wie ich es mir vorstelle, nur der N 64 will nicht. ich starte das Spiel, der schwarze Bildschirm kommt kurz und das wars auch.
Die Controller Konfiguration hab ich 3 mal geprüft, daran sollte es nicht liegen und durch Google hab ich mich mit den Displaymodes schlau gemacht.
ich habe zwar folgende Befehle versucht:
tvservice -m DMT
tvservice -m CEAnur sagt er mir bei beiden 0 Modes vorhanden.
meine recalbox.conf sieht wie folgt aus:
/////////////////////////////////////////////////////////////////////////////////////////
System Variable
You can configure your recalbox from here
To set a variable, remove the first ; on the line
------------ A - System Options -----------
Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)Recalbox Manager (http manager)
system.manager.enabled=1
Recalbox API (REST)
system.api.enabled=0
EmulationStation menu style
default -> default all options menu
none -> no menu except the game search menu
bartop -> less menu, only needed for bartops
system.es.menu=default
Emulator special keys
default -> default all special keys
nomenu -> cannot popup the emulator menu
none -> no special keys in emulators
system.emulators.specialkeys=default
Show or hide kodi in emulationstation (0,1)
kodi.enabled=0
Start kodi at launch (0,1)
kodi.atstartup=0
set x button shortcut (0,1)
kodi.xbutton=0
Kodi can wait for a network component before starting
waithost is the ip or hostname that must answer to a ping to validate the availability
waittime is the maximum time waited when kodi boots
if waitmode is required, kodi will not start if the component is not available
if waitmode is wish, kodi will start if the component is not available
if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50------------ B - Network ------------
Set system hostname
system.hostname=RECALBOX
Activate wifi (0,1)
wifi.enabled=1
Wifi SSID (string)
wifi.ssid=Sheepnet
Wifi KEY (string)
Escape your special chars (# ; $) with a backslash : $ => $
wifi.key=a5g34j689jre3457ddfgztr456ed43
Samba share
system.samba.enabled=1
Virtual Gamepads
system.virtual-gamepads.enabled=1
SSH
system.ssh.enabled=1
------------ C - Audio ------------
Set the audio device (auto, hdmi, jack)
audio.device=auto
Set system volume (0..100)
audio.volume=92
Enable or disable system sounds in ES (0,1)
audio.bgmusic=1
-------------- D - Controllers -----------------
Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1
Please enable only one of these
-------------- D1 - PS3 Controllers ------------
##Enable PS3 controllers support
controllers.ps3.enabled=1Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=official
------------ D2 - XBOX Controllers ------------
Xbox controllers are already supported, but xboxdrv can solve some compatibility issues
Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=0
Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=2
------------ D3 - GPIO Controllers ------------
GPIO Controllers
enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2
DB9 Controllers
Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
db9 arguments
controllers.db9.args=map=1
Gamecon controllers
Enable gamecon controllers, for nes, snes psx (0,1)
controllers.gamecon.enabled=0
gamecon_args
controllers.gamecon.args=map=1
XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1
------------ F - Language and keyboard ------------
Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=de_DE
set the keyboard layout (fr,en,de,us,es)
;system.kblayout=us
Set you local time
Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris
------------ G - UPDATES ------------
Automatically check for updates at start (0,1)
updates.enabled=1
Update type : default to stable
set to unstable at your own risk to get the development version.
updates.type=stable
------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------
The global value will be used for all emulators, except if the value
is redefined in the emulator
Set game resolution for emulators
select your mode from the command : tvservice -m [MODE]
CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
use 'default' for using the default resolution
(string)
global.videomode=CEA 4 HDMI
Shader set
Automatically select shaders for all systems
(none, retro, scanlines)
global.shaderset=none
Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=0
Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=
Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto
Set smooth for all emulators (0,1)
global.smooth=1
Set rewind for all emulators (0,1)
global.rewind=0
Set autosave/load savestate for all emulators (0,1)
global.autosave=0
Enable retroarchievements (0,1)
Set your www.retroachievements.org username/password
Escape your special chars (# ; $) with a backslash : $ => $
global.retroachievements=0
global.retroachievements.username=
global.retroachievements.password=Set retroarch input driver (auto, udev, sdl2)
If you don't have issues with your controllers, let auto
global.inputdriver=auto
If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg
------------ I - EMULATORS CHOICES -----------
You can override the global configuration here
Here is the snes example
;snes.videomode=CEA 4 HDMI
snes.core=snes9x_next
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0If you do not want recalboxOS to generate the configuration for the emulator :
;snes.configfile=/path/to/my/configfile.cfg
Default cores for RPi3
snes.core=snes9x_next
gba.core=mgba
mame.core=mame078
nes.core=fceunextNeoGeo emulator
You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
neogeo.core=fba
N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
n64.videomode=DMT 4 HDMI
If you are using a CRT screen, please change the setting above with this one :
n64.videomode=default
Configurations generated by Recalbox
n64.emulator=default
n64.core=n64//////////////////////////////////////////////////////////////////////////////////////////////////////////
Ich habe den default modes für CRT Monitore versucht aber ohne Erfolg. Vielleicht wisst ihr was zutun ist
Solltet ihr mehr Infos brauchen, einfach schreiben
Danke im Vorraus, Chris
-
ok, hat sich erledigt. auf einmal funktioniert es. hab zwar jetzt das spiel am laufen aber am rechten rand nen d**ken schwarzen balken. Heißt das Bild ist nicht zentral sondern klebt am linken Rand aber was solls. Es funktioniert
-
Guten Morgen,
Ist der schwarze Rand nur beim n64 System?
Grundsätzlich sollte man das Problem mit dem schwarzen Rand per Overscan beheben können.
https://github.com/recalbox/recalbox-os/wiki/Overscan-Einstellungen-%28DE%29Ich bin noch auf der Suche nach weiteren Antworten.....
Dann editiere ich diesen Post -
Hi,
How is.your screen connected ? Through hdmi ? Does it support 640x480 ? If not, replace n64.videomode value to
default
in recalbox.conf -
@abunille Ich werde es nachher wenn ich zuhause bin ausprobieren. Danke für deine Antwort
-
@Substring the problem is solved. It's connected to the dpi port and I have set the video mode to default and it works. But the screen sets the emulator to the left side. At the right side is black space. I try the overscan later. Thx for the response
-
Andere Frage, weiß jemand wie ich den Display und/oder den hdmi Port nutze? Google sagte mir es gibt keine Lösung