Solved dragonrise generic encoders

[Substring]

@redcomshell mmmhhhhh now that is wierd ... On whichever emulator you said ? Could you try N64, scummvm or Moonlight to see if it's just a retroarch problem ?

You should also try running the evtest command with both encoders plugged, and with just one plugged to see if you get the same results, then try switching from auto to sdl2 for the input method in the recalbox.conf

[Markus]

Hi, it seems there are many people who have the same problem, when there is this dragonrise usb in use with 2 Joysticks - except me. Is there already a solution? thx in advance.....

[acris]

Hello
connect your encodeur and need this zip file : https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-(EN)

you need to change driver in recalbox.conf

## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=sdl2

[Markus]

Hi, i uploaded the file - hope it did it right....and also changed the config file to "sdl2" but without any effects - still dont work.....Thank you

[Substring]

@Markus Can you follow https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-(EN) so that we can have a closer look ?

[acris]

@Substring
Link xxx

Il ma conctaté par mp

[Markus]

@acris
Thanks, i was unsure to post the link public

[redcomshell]

@Markus Hello did you ever get a response for your issue? i'm still having the same problem. thank you

[redcomshell]

@acris Hello Acris I have added a zippy file. http://www51.zippyshare.com/v/Sdlr0H2Z/file.html I tried the steps above and it didn't work. i tried both udev and sdl2. thank you in advanced.

[acris]

Hello
if you have recalbox 4.0.2
edit /boot/cmdline.txt and add at the end of line this :

usbhid.quirks=0x0079:0x0006:0x040

like this :

dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap usbhid.quirks=0x0079:0x0006:0x040

save and reboot your raspberry.
Go to Emulationstation Menu > options gamepad.
Configure only player 1

[Wal Ksys]

@acris Hello! Did that work? I'm having the same problem now that I'm setting up my own arcade. Thank you very much!

[acris]

Hello @Wal-Ksys
Yes it works but you need to find idvendor and idproduct must be different

[Wal Ksys]

@acris How can I get them? I'm pretty new at this. Recalbox recognizes them as DragonRise. Thank you!

[Wal Ksys]

@acris Hello,
I uploaded a file with the result of the recalbox-support.sh comman zippyshare . Does it help? thank you very much!

[acris]

@Wal-Ksys

same instructions configure only Player 1

@acris said in dragonrise generic encoders:

Hello
if you have recalbox 4.0.2

https://github.com/recalbox/recalbox-os/wiki/Make-a-partition-writable-(EN)

edit /boot/cmdline.txt and add at the end of line this :

usbhid.quirks=0x0079:0x0006:0x040

like this :

dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap usbhid.quirks=0x0079:0x0006:0x040

save and reboot your raspberry.
Go to Emulationstation Menu > options gamepad.
Configure only player 1

[Wal Ksys]

@acris Hello! First of all, thanks for the help, Already solved!! thank you very much!!! In the end, it was a human error. To better order the cables inside the Arcade, I did not notice and one of the levers was turned upside down !!