Ecran externe hdmi noir



  • Bonjour,
    J'utilise avec bonheur recalbox depuis la version 6 puis 6.1 et voilà que la version 7.1 n'affiche plus l'image sur l'ecran externe (une tv reliée en hdmi.)
    Plus surprenant, l'animation du splash screen fonctionne bien sur les 2 écrans mais écran noir sur le tv dès le démarrage de emulationstation...
    je cherche depuis plusieurs jours en ligne et dans le forum recalbox en vain.
    Voici ce que j'ai déjà tenté en vain :

    • modifier dans share/system/recalbox.conf avec les paramètres suivants : global.videomode=DMT 19 HDMI
    • modifier dans share/system/recalbox.conf :
      Prefered external screen retrieved from ssh : xrandr
      ;system.externalscreen.prefered=HDMI-1
      Force selected external screen to resolution ex : 1920x1080
      ;system.externalscreen.forceresolution=1280x720
      (j'ai aussi essayé avec une résolution de 1366x768 correspondant à celle de mon ordinateur.)
      Merci pour vos lumières !
      --
      PC HP 15-aynf
      12Go ram
      TV Samsung HD 1280x720

  • Staff
    Global moderator
    Team

    il faut retirer les points virgules devant les lignes pour les activer.



  • Zut alors, je ne connaissais que les # pour commenter une ligne... J'ai appris quelque chose ce soir, merci.
    Par contre, ça n'est pas encore la bonne solution.
    J'ai retiré les points virgules puis essayé plusieurs résolutions (1366x768 comme mon ordi ou encore 640x480 des fois que) mais rien n'y fait, l'écran de tv reste noir (alors que quelques secondes avant, l'écran splash screen s'affiche parfaitement !...)

    system.externalscreen.prefered=HDMI-1
    system.externalscreen.forceresolution=1366x768

    (il n'y a pas moyen de récupérer les paramètres vidéo du splash screen qui fonctionne ?...)



  • @vinymusic J'ai eu le même souci, je pensais que ça venait de l'alimentation, mais pas du tout, il faut bidouiller le fichier de configuration vidéo de RB, j'ai enfin pu à la fin passer le Pi 4 en HDMI Full HD, c'était gavant. Je te mets mes propres lignes en dessous, pense à faire une sauvegarde de ton fichier avant de le modifier avec le mien, on sait jamais vu que tu tournes sur pc.



  • Envoie ta configuration du fichier même directement



  • Tout d'abord merci d'avoir pris le temps de vous intéresser à mon cas !
    Voici le fichier recalbox.conf :

    # System Variable
    # You can configure your recalbox from here
    # To set a variable, remove the first ; on the line
    
    
    # ------------ A - System Options ----------- #
    ## Splash screen duration
    ##  0 : Video will be stopped when emulationstation is ready to start.
    ## -1 : All the video will be played before emulationstation start (default)
    ## >0 : Time the video will be played before emulationstation start (in seconds)
    system.splash.length=-1
    ## Splash videos selection
    ## all: select a boot video in recalbox videos and user videos
    ## recalbox: select a boot video only in recalbox videos
    ## custom: select a boot video only in user videos
    ## Any invalid value means "all"
    system.splash.select=all
    
    ## Prefered external screen retrieved from ssh : xrandr
    system.externalscreen.prefered=HDMI-1
    ## Force selected external screen to resolution ex : 1920x1080
    system.externalscreen.forceresolution=1366x768
    
    ## Recalbox Manager (http manager)
    system.manager.enabled=1
    ## Currently, only version 2 is available
    system.manager.version=2
    
    ## Recalbox security
    # enforce security
    # samba password required
    # disable virtual gamepads
    system.security.enabled=0
    
    ## Recalbox API (REST)
    system.api.enabled=0
    
    ## EmulationStation
    ### menu style
    ### default -> default all options menu
    ### none -> no menu except the game search menu
    ### bartop -> less menu, only needed for bartops
    emulationstation.menu=default
    ### Select a system to show on boot (use rom directory name) (string)
    emulationstation.selectedsystem=vectrex
    ### Show the gamelist of the first or selected system on boot (0,1)
    emulationstation.bootongamelist=0
    ### Disable system view. ES will boot and show ONLY the first or selected system (0,1)
    emulationstation.hidesystemview=0
    ### Parse Gamelists only. Show only games listed in gamelist.xml files (0,1)
    emulationstation.gamelistonly=0
    ### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
    emulationstation.forcebasicgamelistview=0
    ### Filter out adult games
    ### you may use emulationstation.snes.filteradultgames=1
    ### to filter out adult games for the snes system or any other system
    emulationstation.filteradultgames=0
    ### Zipped gamelist preference
    ### Whatever you choose, emulationstation can read both compressed
    ### and uncompressed gamelist.xml or gamelist.zip
    ### However updated gamelist will be saved in your prefered format.
    ### Zipped format may save load time, especially on slow devices.
    ### 0 = gamelist.xml
    ### 1 = gamelist.zip
    ;emulationstation.zippedgamelist=1
    
    ## Arcade metasystem
    ## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo
    ## into a single "Arcade" system.
    ;emulationstation.arcade=1
    ## You may want to specify its position in the system list. (Default: 0)
    ## Negatives values may be used to tart from the end (-1 = last position)
    ;emulationstation.arcade.position=0
    ## Include NeoGeo or not (default: 1)
    ;emulationstation.arcade.includeneogeo=1
    ## Hide included system or leave them in the system list (default: 1)
    ;emulationstation.arcade.hideoriginals=1
    
    ## Virtual systems
    ### Activate a virtual system with all games available from all systems
    ;emulationstation.collection.allgames=1
    ### Activate a virtual system with all multiplayer games (players >= 2)
    ;emulationstation.collection.multiplayers=1
    ### Activate a virtual system with last played games
    ;emulationstation.collection.lastplayed=1
    
    ## Videosnaps
    ### Delay before videosnaps start, in millisecond. Default: 2s
    ;emulationstation.videosnaps.delay=2000
    ### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out
    ;emulationstation.videosnaps.loop=1
    ### Enable videosnap sound/music
    ;emulationstation.videosnaps.sound=1
    
    ## Scrapers
    ### Activate this option to extract region from filename when possible
    ;scraper.extractregionfromfilename=1
    ### Select the source of game's names
    ### 0 = from scrapper result (default)
    ### 1 = from filename
    ### 2 = from filename undecorated (i.e: (text) and [text] removed)
    ;scraper.getnamefrom=0 
    ### ScreenScraper.fr
    ### Force media region - if not defined, region is taken from system.language. Default: us
    ;scraper.screenscraper.region=eu
    ### Force text language - if not defined, region is taken from system.language. Default: en
    ;scraper.screenscraper.language=fr
    ### Choose the media to download among:
    ### screenshot: game screenshot
    ### title     : game title screenshot
    ### box2d     : Front case
    ### box3d     : 3D rendered case
    ### mixv1     : Recalbox special mix image V1 (default)
    ### mixv2     : Recalbox special mix image V2
    ;scraper.screenscraper.media=mixv1
    ### ScreenScraper account
    ;scraper.screenscraper.user=
    ;scraper.screenscraper.password=
    
    ## Emulator special keys
    ## default -> default all special keys
    ## nomenu -> cannot popup the emulator menu
    ## none -> no special keys in emulators
    system.emulators.specialkeys=default
    
    ## Show or hide kodi in emulationstation (0,1)
    kodi.enabled=1
    ## Start kodi at launch (0,1)
    kodi.atstartup=0
    ## set x button shortcut (0,1)
    kodi.xbutton=1
    
    ## Kodi can wait for a network component before starting
    ## waithost is the ip or hostname that must answer to a ping to validate the availability
    ## waittime is the maximum time waited when kodi boots
    ## if waitmode is required, kodi will not start if the component is not available
    ## if waitmode is wish, kodi will start if the component is not available
    ## if waitmode is not set or has another value, kodi will start immediately
    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50
    
    
    
    # ------------ B - Network ------------ #
    ## Set system hostname
    system.hostname=RECALBOX
    ## Activate wifi (0,1)
    wifi.enabled=0
    ## Set wifi region
    ## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN)
    wifi.region=JP
    ## Wifi SSID (string)
    ;wifi.ssid=new ssid
    ## Wifi KEY (string)
    ## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
    ## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
    ## Escape your special chars (# ; $) with a backslash : $ => \$
    ;wifi.key=new key
    
    ## Wifi - static IP
    ## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask)
    ## if any value is missing or all lines are commented out, it will fall back to the
    ## default of DHCP
    ;wifi.ip=manual ip address
    ;wifi.gateway=new gateway
    ;wifi.netmask=new netmask
    
    # secondary wifi (not configurable via the user interface)
    ;wifi2.ssid=new ssid
    ;wifi2.key=new key
    
    # third wifi (not configurable via the user interface)
    ;wifi3.ssid=new ssid
    ;wifi3.key=new key
    
    ## Samba share
    system.samba.enabled=1
    ### Virtual Gamepads
    system.virtual-gamepads.enabled=1
    ### SSH
    system.ssh.enabled=1
    
    
    
    # ------------ C - Audio ------------ #
    ## Set the audio device (auto, hdmi, jack)
    audio.device=Default output
    ## Set system volume (0..100)
    audio.volume=90
    ## Enable or disable system sounds in ES (0,1)
    audio.bgmusic=1
    
    
    
    # -------------- D - Controllers ----------------- #
    # Enable support for standard bluetooth controllers
    controllers.bluetooth.enabled=1
    # Enable ERTM
    controllers.bluetooth.ertm=1
    
    
    ## Please enable only one of these
    # -------------- D1 - PS3 Controllers ------------ #
    ##Enable PS3 controllers support
    controllers.ps3.enabled=1
    ## Choose a driver between bluez, official and shanwan
    ## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
    ## official -> sixad drivers, support official and gasia sisaxis
    ## shanwan -> shanwan drivers, support official and shanwan sisaxis
    controllers.ps3.driver=bluez
    
    
    # ------------ D2 - GPIO Controllers ------------ #
    ## GPIO Controllers
    ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
    controllers.gpio.enabled=0
    ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
    controllers.gpio.args=map=1,2
    
    
    ## DB9 Controllers
    ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
    controllers.db9.enabled=0
    ## db9 arguments
    controllers.db9.args=map=1
    
    ## Gamecon controllers
    ## Enable gamecon controllers, for nes, snes, psx (0,1) 
    controllers.gamecon.enabled=0
    ## gamecon_args
    controllers.gamecon.args=map=1
    
    ## XGaming's XArcade Tankstik and other compatible devices
    controllers.xarcade.enabled=1
    
    # ------------ D3 - Dolphin COntrollers ------------- #
    # Wiimote sensor bar position
    # set position to 1 for the sensor bar at the top of the screen, to 0 for the sensor bar at the bottom
    wii.sensorbar.position=1
    
    # Real wiimotes must not be paired with recalbox system so that they can work with the wii emulator
    # set realwiimotes to 1 to use authentics Wiimotes pads on default
    wii.realwiimotes=0
    
    # Gamecube Pads
    # Real gamecube pads work only in dolphin with "Wiiu adapter gamecube controllers" so that they can work with the gamecube emulator
    # set realgamcubepads to 1 to use authentics Gamecube pads on default
    gamecube.realgamecubepads=0
    
    
    
    # ------------ E - Language and keyboard ------------ #
    ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
    system.language=fr_FR
    ## set the keyboard layout (fr,en,de,us,es)
    system.kblayout=fr
    ## Set you local time
    ## Select your timezone from : ls /usr/share/zoneinfo/ (string)
    ;system.timezone=Europe/Paris
    
    
    
    # ------------ F - UPDATES ------------ #
    ## Automatically check for updates at start (0,1)
    updates.enabled=1
    # Update type : default to stable
    updates.type=stable
    
    
    
    # ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
    ## The global value will be used for all emulators, except if the value
    ## is redefined in the emulator
    
    ## Set game resolution for emulators
    ## Please don't modify this setting
    ## This arch does not support the video mode switch
    ## (string)
    global.videomode=default
    
    ## Shader set 
    ## Automatically select shaders for all systems
    ## (none, retro, scanlines)
    global.shaderset=none
    
    ## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
    global.integerscale=0
    
    ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
    global.shaders=
    
    ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
    global.ratio=config
    
    ## Set smooth for all emulators (0,1)
    global.smooth=1
    
    ## Set rewind for all emulators (0,1)
    global.rewind=1
    
    ## Set autosave/load savestate for all emulators (0,1)
    global.autosave=0
    
    ## Enable retroarchievements (0,1)
    ## Set your www.retroachievements.org username/password
    ## Escape your special chars (# ; $) with a backslash : $ => \$
    global.retroachievements=0
    global.retroachievements.hardcore=0
    global.retroachievements.username=
    global.retroachievements.password=
    
    ## Set retroarch input driver (auto, udev, sdl2)
    ## If you don't have issues with your controllers, let auto
    global.inputdriver=auto
    
    ## If you do not want recalboxOS to generate the configuration for all emulators (string)
    ;global.configfile=/path/to/my/configfile.cfg
    
    ## Demo screensaver parameters
    ## Set the system list from which ES will run random games
    ## Empty list or unexisting key means all available systems
    global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes
    ## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions
    ;global.demo.duration=90
    ## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens.
    ;global.demo.infoscreenduration=6
    
    ## Retroarch AI Translation service
    ## Comment out or set to 0 the following key if you don't want the AI service
    global.translate=1
    ## Set the source and the target languages.
    ## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ,
    ##                        AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS,
    ##                        MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI
    ## Setting the translate.from key to a specified language may speed up or give more accurate results
    ## If translate.to key is commented, the default value is extracted from system.language or, if system.language is
    ## undefined, set to auto (=EN).
    global.translate.from=auto
    global.translate.to=auto
    ## zTranslate API Key
    ## go to https://ztranslate.net and create an account.
    ## validate your account, then log in and go to the settngs page
    ## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key:
    ;global.translate.apikey=RECALBOX
    ## Other translation service
    ## If you want to use another translation service or a custom API call, use this key to
    ## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key
    ;global.translate.url=
    
    
    
    # ------------ H - EMULATORS CHOICES ----------- #
    ## You can override the global configurations here
    ## Here is the snes example
    ;snes.core=snes9x2010
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=16/9
    ;snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro
    ;snes.integerscale=0
    ## If you do not want recalboxOS to generate the configuration for the emulator: 
    ;snes.configfile=/path/to/my/configfile.cfg
    
    ## Default cores for x86_64
    n64.core=glide64mk2
    psx.core=mednafen_psx_hw
    
    ## NeoGeo emulator 
    ## You can use pifba or a libretro core (fba2x,libretro)
    neogeo.emulator=libretro
    ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000)
    neogeo.core=fbneo
    
    ## Demo screensaver parameters
    ## Include or exclude a particular system from the demo screensaver
    ## You may change the global.demo.systemlist key or include/exclude every single system
    ;snes.demo.include=0
    ## Set the session duration for a particular system
    ;snes.demo.duration=90
    
    
    
    # ------------ I - NETPLAY PARAMETERS ----------- #
    ## All these values are handled by Recalbox itself
    global.netplay=1
    global.netplay.nickname=
    global.netplay.port=55435
    global.netplay.relay=
    global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom
    global.netplay.lobby=http://lobby.libretro.com/list/
    
    ## Configurations generated by Recalbox
    global.quitpresstwice=0
    snes.sort=0
    emulationstation.snes.filteradultgames=0
    snes.flatfolder=0
    


  • J'ai même retrouvé la configuration pour la version 6.1.1.
    J'ai ainsi modifié le fichier de configuration de la version 7.1 comme ceci :

    global.videomode=CEA 1 HDMI
    

    Remarque : j'avais bien sûr annulé les modifications des 2 lignes :

    system.externalscreen.prefered=
    system.externalscreen.forceresolution=default
    

    Mais sans plus de succès pour le moment...


  • Staff
    Global moderator
    Team

    @vinymusic
    rends toi sur le discord dans le week end ou semaine, et voir avec @st0 dans le canal vocal si il peut t aider.



  • @vinymusic said in Ecran externe hdmi noir:

    system.externalscreen.prefered=

    ça y est, j'ai trouvé, il n'y avait qu'un tiret en trop : en effet, la commande xrandr me renvoyait

    HDMI-1
    

    mais il fallait écrire dans recalbox.conf :

    system.externalscreen.prefered=HDMI1
    
    system.externalscreen.forceresolution=1280x720
    

    Enfin, ça fonctionne ! (juste une histoire de tiret...)
    Merci à PierreGamer pour son soutien !



  • @vinymusic said in Résolu / Ecran externe hdmi noir:

    Bonjour,
    J'utilise avec bonheur recalbox depuis la version 6 puis 6.1 et voilà que la version 7.1 n'affiche plus l'image sur l'ecran externe (une tv reliée en hdmi.)
    Plus surprenant, l'animation du splash screen fonctionne bien sur les 2 écrans mais écran noir sur le tv dès le démarrage de emulationstation...
    je cherche depuis plusieurs jours en ligne et dans le forum recalbox en vain.
    Voici ce que j'ai déjà tenté en vain :

    • modifier dans share/system/recalbox.conf avec les paramètres suivants : global.videomode=DMT 19 HDMI
    • modifier dans share/system/recalbox.conf :
      Prefered external screen retrieved from ssh : xrandr
      ;system.externalscreen.prefered=HDMI-1
      Force selected external screen to resolution ex : 1920x1080
      ;system.externalscreen.forceresolution=1280x720
      (j'ai aussi essayé avec une résolution de 1366x768 correspondant à celle de mon ordinateur.)
      Merci pour vos lumières !
      --
      PC HP 15-aynf
      12Go ram
      TV Samsung HD 1280x720

Log in to reply
 

Want to support us ?

419
Online

80.4k
Users

21.6k
Topics

157.8k
Posts