Pi 3 model A+ / Version 6.1.1 : Problème pour changer de jeux
-
Bonjour @blanka75
peux tu poster ton fichier recalbox.conf ?
Désactive les services non nécessaires comme le webmanager.
Ton modèle n'a pas beaucoup de ram, dont il souffre. -
Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356PUSHRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)fbcp FrameBuffer Copy Program
For small TFT screen on GPIO and SPI
See https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-(EN) for details
Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen
See https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN)
for support and configuration details needed by /boot/config.txt
system.fbcp.enabled=0
Splash screen duration
0: Video will be played for 20 seconds (default)
-1: All the video will be played (it won't be stopped automatically)
>0 : Time before the video will be stopped (in seconds)
system.splash.length=0
Recalbox Manager (http manager)
system.manager.enabled=1
Currently, only version 2 is available
system.manager.version=2
Recalbox security
enforce security
samba password required
disable virtual gamepads
system.security.enabled=0
Recalbox API (REST)
system.api.enabled=0
Allow a specific resolution for ES only from the command : tvservice -m [MODE]
Leave commented for the default usual behaviour
;system.es.videomode=CEA 4 HDMI
EmulationStation
menu style
default -> default all options menu
none -> no menu except the game search menu
bartop -> less menu, only needed for bartops
emulationstation.menu=default
Select a system to show on boot (use rom directory name) (string)
emulationstation.selectedsystem=favorites
Show the gamelist of the first or selected system on boot (0,1)
emulationstation.bootongamelist=0
Disable system view. ES will boot and show ONLY the first or selected system (0,1)
emulationstation.hidesystemview=0
Pa**e Gamelists only. Show only games listed in gamelist.xml files (0,1)
emulationstation.gamelistonly=0
Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
emulationstation.forcebasicgamelistview=0
Videosnaps
Delay before videosnaps start, in millisecond. Default: 2s
;emulationstation.videosnaps.delay=2000
Video loop times. 0 = no video. 1 or more = the video loops x times before fading out
;emulationstation.videosnaps.loop=1
Scrapers
ScreenScraper.fr
Force media region - if not defined, region is taken from system.language. Default: us
;scraper.screenscraper.region=eu
Force text language - if not defined, region is taken from system.language. Default: en
;scraper.screenscraper.language=fr
Choose the media to download among:
screenshot: game screenshot
title : game title screenshot
box2d : Front case
box3d : 3D rendered case
mixv1 : Recalbox special mix image V1 (default)
mixv2 : Recalbox special mix image V2
;scraper.screenscraper.media=mixv1
ScreenScraper account
;scraper.screenscraper.user=
;scraper.screenscraper.password=Emulator special keys
default -> default all special keys
nomenu -> cannot popup the emulator menu
none -> no special keys in emulators
system.emulators.specialkeys=default
Show or hide kodi in emulationstation (0,1)
kodi.enabled=1
Start kodi at launch (0,1)
kodi.atstartup=0
set x button shortcut (0,1)
kodi.xbutton=1
Allow a specific resolution for Kodi only from the command : tvservice -m [MODE]
By default is using the default resolution of your screen
kodi.videomode=default
Kodi can wait for a network component before starting
waithost is the ip or hostname that must answer to a ping to validate the availability
waittime is the maximum time waited when kodi boots
if waitmode is required, kodi will not start if the component is not available
if waitmode is wish, kodi will start if the component is not available
if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50Hyperion
Hyperion allows you to use an ambilight like led system on your recalbox
Use hypercon to create your configuration file, and copy it in /recalbox/share/system/configs/hyperion/hyperion.config.json
hyperion.enabled=0
------------ B - Network ------------
Set system hostname
system.hostname=RECALBOX
Activate wifi (0,1)
wifi.enabled=1
Set wifi region
More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN)
wifi.region=FR
Wifi SSID (string)
wifi.ssid=
Wifi KEY (string)
after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
Escape your special chars (# ; $) with a backslash : $ => $
wifi.key=
Wifi - static IP
if you want a static IP address, you must set all 3 values (ip, gateway, and netmask)
if any value is missing or all lines are commented out, it will fall back to the
default of DHCP
;wifi.ip=manual ip address
;wifi.gateway=new gateway
;wifi.netmask=new netmasksecondary wifi (not configurable via the user interface)
;wifi2.ssid=new ssid
;wifi2.key=new keythird wifi (not configurable via the user interface)
;wifi3.ssid=new ssid
;wifi3.key=new keySamba share
system.samba.enabled=1
Virtual Gamepads
system.virtual-gamepads.enabled=1
SSH
system.ssh.enabled=1
------------ C - Audio ------------
Set the audio device (auto, hdmi, jack)
audio.device=auto
Set system volume (0..100)
audio.volume=50
Enable or disable system sounds in ES (0,1)
audio.bgmusic=0
-------------- D - Controllers -----------------
Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1
Enable ERTM
controllers.bluetooth.ertm=0
Please enable only one of these
-------------- D1 - PS3 Controllers ------------
##Enable PS3 controllers support
controllers.ps3.enabled=1Choose a driver between bluez, official and shanwan
bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
official -> sixad drivers, support official and gasia sisaxis
shanwan -> shanwan drivers, support official and shanwan sisaxis
controllers.ps3.driver=bluez
------------ D2 - GPIO Controllers ------------
GPIO Controllers
enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2
Custom mk_gpio arguments,
map=5 gpio1=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk for one controller,
map=5 gpio1=pin1,pin2,pin3,.....,pin12,pin13
map=5,6 gpio1=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk gpio2=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk for 2 (map=5,map=5,6)
map=5,6 gpio1=gpiox,gpioy,gpioz,.....,gpiou,gpiov gpio2=gpiox,gpioy,gpioz,.....,gpiou,gpiov
where gpiox,gpioy,gpioz ... are NOT pin numbers on the connector, BUT location gpio numbered as in
https://www.raspberrypi-spy.co.uk/wp-content/uploads/2012/06/Raspberry-Pi-GPIO-Layout-Model-B-Plus-rotated-2700x900.png
Set pin to -1 to disable it
controllers.gpio.args=map=5,6 gpio=4,17,27,22,10,9,25,24,23,18,15,14,2 gpio2=11,5,6,13,19,26,21,20,16,12,7,8,3
MCP configuration : GPIO and MCP can be used together. You can mix them.
map=0x20,0x21 for 2 mcp23017 on i2c bus
#controllers.gpio.args=map=0x20,0x21,5,6 gpio=4,17,27,22,10,9,25,24,23,18,15,14,-1 gpio2=11,5,6,13,19,26,21,20,16,12,7,8,-1
------------ D3 - Steam Controllers ------------
Enable steam controller service
controllers.steam.enabled=0
DB9 Controllers
Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
db9 arguments
controllers.db9.args=map=1
Gamecon controllers
Enable gamecon controllers, for nes, snes, psx (0,1)
controllers.gamecon.enabled=0
gamecon_args
controllers.gamecon.args=map=1
XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1
------------ F - Language and keyboard ------------
Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=fr_FR
set the keyboard layout (fr,en,de,us,es)
;system.kblayout=us
Set you local time
Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris
------------ G - UPDATES ------------
Automatically check for updates at start (0,1)
updates.enabled=0
Update type : default to stable
updates.type=stable
------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------
The global value will be used for all emulators, except if the value
is redefined in the emulator
Set game resolution for emulators
select your mode from the command : tvservice -m [MODE]
CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
use 'default' for using the default resolution
use 'auto' : switches to CEA 4 HDMI if supported, else keep the current resolution
(string)
global.videomode=CEA 4 HDMI
Shader set
Automatically select shaders for all systems
## (none, retro, scanlines)
global.shaderset=scanlinesOnce enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=1
Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=
Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto
Set smooth for all emulators (0,1)
global.smooth=1
Set rewind for all emulators (0,1)
global.rewind=0
Set autosave/load savestate for all emulators (0,1)
global.autosave=0
Enable retroarchievements (0,1)
Set your www.retroachievements.org username/password
Escape your special chars (# ; $) with a backslash : $ => $
global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.username=
global.retroachievements.password=Set retroarch input driver (auto, udev, sdl2)
If you don't have issues with your controllers, let auto
global.inputdriver=auto
If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg
Demo screensaver parameters
Set the system list from which ES will run random games.
Empty list or unexisting key means all available systems
global.demo.systemlist=fba_libretro,gamegear,gba,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,snes
Default demo game sessions last 90s. Change this value if you want shorter or longer sessions
;global.demo.duration=90
Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens.
;global.demo.infoscreenduration=6
Retroarch AI Translation service
Comment out or set to 0 the following key if you don't want the AI service
global.translate=1
Set the source and the target languages.
Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ,
AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS,
MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI
Setting the translate.from key to a specified language may speed up or give more accurate results
If translate.to key is commented, the default value is extracted from system.language or, if system.language is
undefined, set to auto (=EN).
global.translate.from=auto
global.translate.to=autozTranslate API Key
go to https://ztranslate.net and create an account.
validate your account, then log in and go to the settngs page
Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key:
;global.translate.apikey=YOUR_API_KEY_HERE
Other translation service
If you want to use another translation service or a custom API call, use this key to
specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key
;global.translate.url=
Arcade metasystem
Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo
into a single "Arcade" system.
;global.arcade=1
You may want to specify its position in the system list. (Default: 0)
Negatives values may be used to tart from the end (-1 = last position)
;global.arcade.position=0
Include NeoGeo or not (default: 1)
;global.arcade.includeneogeo=1
Hide included system or leave them in the system list (default: 1)
;global.arcade.hideoriginals=1
------------ I - EMULATORS CHOICES -----------
You can override the global configurations here
Here is the snes example
;snes.videomode=CEA 4 HDMI
snes.core=snes9x2010
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0If you do not want recalboxOS to generate the configuration for the emulator:
;snes.configfile=/path/to/my/configfile.cfg
Default cores for RPi3
snes.core=snes9x2010
NeoGeo emulator
You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000)
neogeo.core=fbneo
N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
n64.videomode=DMT 4 HDMI
If you are using a CRT screen, please change the setting above with this one :
n64.videomode=default
Dreamcast emulator
Like N64, such a CPU intensive emulator needs a small resolution
Consider DMT 4 HDMI (640480) or DMT 9 HDMI (800600). If you have a black screen on dreamcast, try DMT 9 HDMI here
dreamcast.videomode=DMT 4 HDMI
Demo screensaver parameters
Include or exclude a particular system from the demo screensaver
You may change the global.demo.systemlist key or include/exclude every single system
;snes.demo.include=0
Set the session duration for a particular system
;snes.demo.duration=90
------------ J - NETPLAY PARAMETERS -----------
All these values are handled by Recalbox itself
global.netplay=1
global.netplay.nickname=
global.netplay.port=55435
global.netplay.relay=
global.netplay.systems=fba_libretro,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx
global.netplay.lobby=http://lobby.libretro.com/list/Configurations generated by Recalbox
global.quitpresstwice=0
-
-
Je viens de faire le test et rien, toujours le même problème.
Par contre j'ai plus accès a mon interface Recalbox.local
(PS je vois bien ma recalbox sur le réseau)
-
Recalbox Manager (http manager)
system.manager.enabled=0
Currently, only version 2 is available
system.manager.version=2
Rien toujours pareil.
-
@blanka75 tu as bien redémarré après la désactivation ?
-
@acris Plutôt deux fois qu'une
. Oui bien sur. -
tu as mis uniquement tes roms ? ou tu as scrappé image+vidéo ?
si tu as scrappé, tu as testé avant le scrap si ça se lançait ? -
C'est des full SET que j'ai scraper il y a quelques semaines. J'ai monté ma carte SD sur RPI3 B+ et j'utilise cette carte "PERSO" pour faire des tests.
CARTE SD SCAN DISK 128 GB, pas de personnalisation, ROMS scraper sur SCREENSKRAPER -
@blanka75
Avant de balancer tous les romsets et scrappés , tu as testé les jeux démos présents sur recalbox ? -
Non, je vais le faire de ce pas.
-
Je suis repartie a partir d'une CARTE SD clean install sans ROMS ajoutés. Sans avoir rien a change a recalbox.conf ça marche nickel. Possibilité de changer de roms sans problèmes. Bravo. Peux-tu me donner la solution a mon problème ?
-
Bonjour @blanka75
déjà si possible le stockage sur usb est clairement le mieux.
Si tu as la possibilité.Si non,
- transfert les roms uniquement via winscp , évite le manager.
- transfert des roms par petit groupe.
- transfert les bios
- Ensuite teste les roms transférés.
si tout est ok, transfert ton scrap à jour, c'est à dire fraichement scrappé par skraper ou arrm. - puis reteste.
si tout est ok, tu peux passer à la suite avec les mêmes manipulations.
Attention le RPI 3A+ à moins de mémoire vive, du coup plus tu vas charger de systèmes plus tu vas le saturer.
-
@acris Merci pour ta réponse et ta recativité
Sur un PI3 model A+ il n'y a qu'un prise USB, (Tu dois le savoir
). Dans ma config. j'ai fais le test avec une manette en USB, je le testerais depuis un BARTOP en GPIO pour le contrôle, donc mon port USB dispo pour les ROMS sur USB.Pour info, je passais par le réseau et j'ai transféré les ROMS SET par groupe complet (tous les MAME, puis tous les SNES, ... ). Je vais le faire par WINSCP (CYBERDUCK pour moi) et par petit groupe.
Le SKRAP est récent, moins d'un mois, fait depuis SKRAPER sur une clé USB (PC utilisé pour l'occasion). Pour info j'utilise les images de type SCREEN SHOT avec Boite et Logo en grande taille (dimension fourni par SKRAPER) (pas dans une télé comme celle recalbox par défaut)Je souhaitais utiliser RPI3 A+ dans un BARTOP avec de l'ARCADE et NEOGEO, étant disponible, contrairement au modele B ou B+ et moins couteux, je trouvais la solution interessante pour un système qui n'a pas de vocation a évoluer. JE prends bonne note de la limite en mémoire. Merci.
-
@acris Re-bonjour,
En y repensant je voulais te préciser, que la carte SD que j'ai utilisé la première fois août j'ai rencontré le problème, a été "monté" entièrement (transfère Bios, Roms, Scrap) sur un RPI 3 B+ et qu'elle fonctionne parfaitement sur ce dernier)
