Pi 3 model A+ / Version 6.1.1 : Problème pour changer de jeux

blanka75 · 14 May 2020, 18:07

Uncomment the system.power.switch you use

;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
;system.power.switch=PIN356PUSHRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

fbcp FrameBuffer Copy Program

For small TFT screen on GPIO and SPI

See https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-(EN) for details

Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen

See https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN)

for support and configuration details needed by /boot/config.txt

system.fbcp.enabled=0

Splash screen duration

0: Video will be played for 20 seconds (default)

-1: All the video will be played (it won't be stopped automatically)

>0 : Time before the video will be stopped (in seconds)

system.splash.length=0

Recalbox Manager (http manager)

system.manager.enabled=1

Currently, only version 2 is available

system.manager.version=2

Recalbox security

enforce security

samba password required

disable virtual gamepads

system.security.enabled=0

Recalbox API (REST)

system.api.enabled=0

Allow a specific resolution for ES only from the command : tvservice -m [MODE]

Leave commented for the default usual behaviour

;system.es.videomode=CEA 4 HDMI

EmulationStation

menu style

default -> default all options menu

none -> no menu except the game search menu

bartop -> less menu, only needed for bartops

emulationstation.menu=default

Select a system to show on boot (use rom directory name) (string)

emulationstation.selectedsystem=favorites

Show the gamelist of the first or selected system on boot (0,1)

emulationstation.bootongamelist=0

Disable system view. ES will boot and show ONLY the first or selected system (0,1)

emulationstation.hidesystemview=0

Pa**e Gamelists only. Show only games listed in gamelist.xml files (0,1)

emulationstation.gamelistonly=0

Force basicgameList view to be displayed, even if your game systems are scraped (0,1)

emulationstation.forcebasicgamelistview=0

Videosnaps

Delay before videosnaps start, in millisecond. Default: 2s

;emulationstation.videosnaps.delay=2000

Video loop times. 0 = no video. 1 or more = the video loops x times before fading out

;emulationstation.videosnaps.loop=1

Scrapers

ScreenScraper.fr

Force media region - if not defined, region is taken from system.language. Default: us

;scraper.screenscraper.region=eu

Force text language - if not defined, region is taken from system.language. Default: en

;scraper.screenscraper.language=fr

Choose the media to download among:

screenshot: game screenshot

title : game title screenshot

box2d : Front case

box3d : 3D rendered case

mixv1 : Recalbox special mix image V1 (default)

mixv2 : Recalbox special mix image V2

;scraper.screenscraper.media=mixv1

ScreenScraper account

;scraper.screenscraper.user=
;scraper.screenscraper.password=

Emulator special keys

default -> default all special keys

nomenu -> cannot popup the emulator menu

none -> no special keys in emulators

system.emulators.specialkeys=default

Show or hide kodi in emulationstation (0,1)

kodi.enabled=1

Start kodi at launch (0,1)

kodi.atstartup=0

set x button shortcut (0,1)

kodi.xbutton=1

Allow a specific resolution for Kodi only from the command : tvservice -m [MODE]

By default is using the default resolution of your screen

kodi.videomode=default

Kodi can wait for a network component before starting

waithost is the ip or hostname that must answer to a ping to validate the availability

waittime is the maximum time waited when kodi boots

if waitmode is required, kodi will not start if the component is not available

if waitmode is wish, kodi will start if the component is not available

if waitmode is not set or has another value, kodi will start immediately

;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50

Hyperion

Hyperion allows you to use an ambilight like led system on your recalbox

Use hypercon to create your configuration file, and copy it in /recalbox/share/system/configs/hyperion/hyperion.config.json

hyperion.enabled=0

------------ B - Network ------------

Set system hostname

system.hostname=RECALBOX

Activate wifi (0,1)

wifi.enabled=1

Set wifi region

More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN)

wifi.region=FR

Wifi SSID (string)

wifi.ssid=

Wifi KEY (string)

after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"

you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot

Escape your special chars (# ; $) with a backslash : $ => $

wifi.key=

Wifi - static IP

if you want a static IP address, you must set all 3 values (ip, gateway, and netmask)

if any value is missing or all lines are commented out, it will fall back to the

default of DHCP

;wifi.ip=manual ip address
;wifi.gateway=new gateway
;wifi.netmask=new netmask

secondary wifi (not configurable via the user interface)

;wifi2.ssid=new ssid
;wifi2.key=new key

third wifi (not configurable via the user interface)

;wifi3.ssid=new ssid
;wifi3.key=new key

Samba share

system.samba.enabled=1

Virtual Gamepads

system.virtual-gamepads.enabled=1

SSH

system.ssh.enabled=1

------------ C - Audio ------------

Set the audio device (auto, hdmi, jack)

audio.device=auto

Set system volume (0..100)

audio.volume=50

Enable or disable system sounds in ES (0,1)

audio.bgmusic=0

-------------- D - Controllers -----------------

Enable support for standard bluetooth controllers

controllers.bluetooth.enabled=1

Enable ERTM

controllers.bluetooth.ertm=0

Please enable only one of these

-------------- D1 - PS3 Controllers ------------

##Enable PS3 controllers support
controllers.ps3.enabled=1

Choose a driver between bluez, official and shanwan

bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis

official -> sixad drivers, support official and gasia sisaxis

shanwan -> shanwan drivers, support official and shanwan sisaxis

controllers.ps3.driver=bluez

------------ D2 - GPIO Controllers ------------

GPIO Controllers

enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

controllers.gpio.enabled=0

mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

controllers.gpio.args=map=1,2

Custom mk_gpio arguments,

map=5 gpio1=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk for one controller,

map=5 gpio1=pin1,pin2,pin3,.....,pin12,pin13

map=5,6 gpio1=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk gpio2=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk for 2 (map=5,map=5,6)

map=5,6 gpio1=gpiox,gpioy,gpioz,.....,gpiou,gpiov gpio2=gpiox,gpioy,gpioz,.....,gpiou,gpiov

where gpiox,gpioy,gpioz ... are NOT pin numbers on the connector, BUT location gpio numbered as in

https://www.raspberrypi-spy.co.uk/wp-content/uploads/2012/06/Raspberry-Pi-GPIO-Layout-Model-B-Plus-rotated-2700x900.png

Set pin to -1 to disable it

controllers.gpio.args=map=5,6 gpio=4,17,27,22,10,9,25,24,23,18,15,14,2 gpio2=11,5,6,13,19,26,21,20,16,12,7,8,3

MCP configuration : GPIO and MCP can be used together. You can mix them.

map=0x20,0x21 for 2 mcp23017 on i2c bus

#controllers.gpio.args=map=0x20,0x21,5,6 gpio=4,17,27,22,10,9,25,24,23,18,15,14,-1 gpio2=11,5,6,13,19,26,21,20,16,12,7,8,-1

------------ D3 - Steam Controllers ------------

Enable steam controller service

controllers.steam.enabled=0

DB9 Controllers

Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

controllers.db9.enabled=0

db9 arguments

controllers.db9.args=map=1

Gamecon controllers

Enable gamecon controllers, for nes, snes, psx (0,1)

controllers.gamecon.enabled=0

gamecon_args

controllers.gamecon.args=map=1

XGaming's XArcade Tankstik and other compatible devices

controllers.xarcade.enabled=1

------------ F - Language and keyboard ------------

Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

system.language=fr_FR

set the keyboard layout (fr,en,de,us,es)

;system.kblayout=us

Set you local time

Select your timezone from : ls /usr/share/zoneinfo/ (string)

;system.timezone=Europe/Paris

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=0

Update type : default to stable

updates.type=stable

------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

The global value will be used for all emulators, except if the value

is redefined in the emulator

Set game resolution for emulators

select your mode from the command : tvservice -m [MODE]

CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

use 'default' for using the default resolution

use 'auto' : switches to CEA 4 HDMI if supported, else keep the current resolution

(string)

global.videomode=CEA 4 HDMI

Shader set

Automatically select shaders for all systems

## (none, retro, scanlines)
global.shaderset=scanlines

Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

global.integerscale=1

Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

global.shaders=

Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

global.ratio=auto

Set smooth for all emulators (0,1)

global.smooth=1

Set rewind for all emulators (0,1)

global.rewind=0

Set autosave/load savestate for all emulators (0,1)

global.autosave=0

Enable retroarchievements (0,1)

Set your www.retroachievements.org username/password

Escape your special chars (# ; $) with a backslash : $ => $

global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.username=
global.retroachievements.password=

Set retroarch input driver (auto, udev, sdl2)

If you don't have issues with your controllers, let auto

global.inputdriver=auto

If you do not want recalboxOS to generate the configuration for all emulators (string)

;global.configfile=/path/to/my/configfile.cfg

Demo screensaver parameters

Set the system list from which ES will run random games.

Empty list or unexisting key means all available systems

global.demo.systemlist=fba_libretro,gamegear,gba,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,snes

Default demo game sessions last 90s. Change this value if you want shorter or longer sessions

;global.demo.duration=90

Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens.

;global.demo.infoscreenduration=6

Retroarch AI Translation service

Comment out or set to 0 the following key if you don't want the AI service

global.translate=1

Set the source and the target languages.

Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ,

AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS,

MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI

Setting the translate.from key to a specified language may speed up or give more accurate results

If translate.to key is commented, the default value is extracted from system.language or, if system.language is

undefined, set to auto (=EN).

global.translate.from=auto
global.translate.to=auto

zTranslate API Key

go to https://ztranslate.net and create an account.

validate your account, then log in and go to the settngs page

Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key:

;global.translate.apikey=YOUR_API_KEY_HERE

Other translation service

If you want to use another translation service or a custom API call, use this key to

specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key

;global.translate.url=

Arcade metasystem

Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo

into a single "Arcade" system.

;global.arcade=1

You may want to specify its position in the system list. (Default: 0)

Negatives values may be used to tart from the end (-1 = last position)

;global.arcade.position=0

Include NeoGeo or not (default: 1)

;global.arcade.includeneogeo=1

Hide included system or leave them in the system list (default: 1)

;global.arcade.hideoriginals=1

------------ I - EMULATORS CHOICES -----------

You can override the global configurations here

Here is the snes example

;snes.videomode=CEA 4 HDMI
snes.core=snes9x2010
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0

If you do not want recalboxOS to generate the configuration for the emulator:

;snes.configfile=/path/to/my/configfile.cfg

Default cores for RPi3

snes.core=snes9x2010

NeoGeo emulator

You can use pifba or a libretro core (fba2x,libretro)

neogeo.emulator=libretro

If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000)

neogeo.core=fbneo

N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

n64.videomode=DMT 4 HDMI

If you are using a CRT screen, please change the setting above with this one :

n64.videomode=default

Dreamcast emulator

Like N64, such a CPU intensive emulator needs a small resolution

Consider DMT 4 HDMI (640480) or DMT 9 HDMI (800600). If you have a black screen on dreamcast, try DMT 9 HDMI here

dreamcast.videomode=DMT 4 HDMI

Demo screensaver parameters

Include or exclude a particular system from the demo screensaver

You may change the global.demo.systemlist key or include/exclude every single system

;snes.demo.include=0

Set the session duration for a particular system

;snes.demo.duration=90

------------ J - NETPLAY PARAMETERS -----------

All these values are handled by Recalbox itself

global.netplay=1
global.netplay.nickname=
global.netplay.port=55435
global.netplay.relay=
global.netplay.systems=fba_libretro,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx
global.netplay.lobby=http://lobby.libretro.com/list/

Configurations generated by Recalbox

global.quitpresstwice=0

acris · 14 May 2020, 18:08

@blanka75

Désactive :

 Recalbox Manager (http manager)
system.manager.enabled=0

blanka75 · 14 May 2020, 18:18

Je viens de faire le test et rien, toujours le même problème.

Par contre j'ai plus accès a mon interface Recalbox.local

(PS je vois bien ma recalbox sur le réseau)

blanka75 · 14 May 2020, 19:36

@acris

Recalbox Manager (http manager)

system.manager.enabled=0

Currently, only version 2 is available

system.manager.version=2

Rien toujours pareil.

acris · 14 May 2020, 19:56

@blanka75 tu as bien redémarré après la désactivation ?

blanka75 · 14 May 2020, 20:01

@acris Plutôt deux fois qu'une . Oui bien sur.

acris · 14 May 2020, 20:13

tu as mis uniquement tes roms ? ou tu as scrappé image+vidéo ?
si tu as scrappé, tu as testé avant le scrap si ça se lançait ?

blanka75 · 14 May 2020, 20:27

C'est des full SET que j'ai scraper il y a quelques semaines. J'ai monté ma carte SD sur RPI3 B+ et j'utilise cette carte "PERSO" pour faire des tests.
CARTE SD SCAN DISK 128 GB, pas de personnalisation, ROMS scraper sur SCREENSKRAPER

acris · 14 May 2020, 20:39

@blanka75
Avant de balancer tous les romsets et scrappés , tu as testé les jeux démos présents sur recalbox ?

blanka75 · 14 May 2020, 20:41

Non, je vais le faire de ce pas.

blanka75 · 14 May 2020, 21:08

Je suis repartie a partir d'une CARTE SD clean install sans ROMS ajoutés. Sans avoir rien a change a recalbox.conf ça marche nickel. Possibilité de changer de roms sans problèmes. Bravo. Peux-tu me donner la solution a mon problème ?

acris · 15 May 2020, 07:21

Bonjour @blanka75
déjà si possible le stockage sur usb est clairement le mieux.
Si tu as la possibilité.

Si non,

transfert les roms uniquement via winscp , évite le manager.
transfert des roms par petit groupe.
transfert les bios
Ensuite teste les roms transférés.
si tout est ok, transfert ton scrap à jour, c'est à dire fraichement scrappé par skraper ou arrm.
puis reteste.
si tout est ok, tu peux passer à la suite avec les mêmes manipulations.

Attention le RPI 3A+ à moins de mémoire vive, du coup plus tu vas charger de systèmes plus tu vas le saturer.

blanka75 · 15 May 2020, 09:50

@acris Merci pour ta réponse et ta recativité

Sur un PI3 model A+ il n'y a qu'un prise USB, (Tu dois le savoir ). Dans ma config. j'ai fais le test avec une manette en USB, je le testerais depuis un BARTOP en GPIO pour le contrôle, donc mon port USB dispo pour les ROMS sur USB.

Pour info, je passais par le réseau et j'ai transféré les ROMS SET par groupe complet (tous les MAME, puis tous les SNES, ... ). Je vais le faire par WINSCP (CYBERDUCK pour moi) et par petit groupe.
Le SKRAP est récent, moins d'un mois, fait depuis SKRAPER sur une clé USB (PC utilisé pour l'occasion). Pour info j'utilise les images de type SCREEN SHOT avec Boite et Logo en grande taille (dimension fourni par SKRAPER) (pas dans une télé comme celle recalbox par défaut)

Je souhaitais utiliser RPI3 A+ dans un BARTOP avec de l'ARCADE et NEOGEO, étant disponible, contrairement au modele B ou B+ et moins couteux, je trouvais la solution interessante pour un système qui n'a pas de vocation a évoluer. JE prends bonne note de la limite en mémoire. Merci.

blanka75 · 15 May 2020, 17:31

@acris Re-bonjour,

En y repensant je voulais te préciser, que la carte SD que j'ai utilisé la première fois août j'ai rencontré le problème, a été "monté" entièrement (transfère Bios, Roms, Scrap) sur un RPI 3 B+ et qu'elle fonctionne parfaitement sur ce dernier)