Raspberry Pi 4
For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.
The Recalbox Team.
CUT SCREEN INITIAL MENU
would there be any solution to fill the screen? notebook with HDMI video output using VGA converter
@dougsky I'm sorry to inform you that adapters from HDMI to VGA and vice versa usually give problem in Recalbox, that's probably it. Test on a monitor without an adapter and check if the problem also happens.
I did the test, restarting the pc without the monitor connected and after the recalbox started I connected the cable again and to my surprise the screen was filled, but when restarting again with the cable connected the screen is cut again ...: (
@dougsky Read this:
I enter the terminal to execute the command and I encounter this error
Can't open display
and I cannot proceed with the described process
thanks for the guidance, resolved, it wasn't as described in the forum but I had a light as I couldn't see the video output by xrandr, and somewhere in a post they mentioned that they modified the .xinitrc, I decided to do it and it worked, disabling the output LVDS1
to disable a video output (multi-screen setup) and prevent ES to be stretcht on all screens,
uncomment the line below, and replace output_name by the output that you want to disable on ES startup (ex: HDMI-0)
xrandr --output LVDS1 --off
Force Display Output 1280x720
xrandr -s 1280x720
ingdanielperez last edited by
@dougsky Thanks, you make my day!!