Raspberry Pi 4
For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.
The Recalbox Team.
Scratching fan noise with 6.1.1-Dragonblaze on Odroid XU4
Megamax last edited by Megamax
Hello, i have installed the new version 6.1.1. on my Odroid XU4
After a short time i hear a loud scraching noise form the fan, but the fan don't moves.
With version 6.0 i don't hear anything.
I think the fan don't get enoth power to move, but make some noise.
Can i adjust the fan parameters?
Many thanks for the help!
@megamax hi, please connect to ssh and try this:
$ mount -o remount,rw / && cd /etc/init.d/ && rm S02fan && wget https://gitlab.com/recalbox/recalbox/raw/master/board/recalbox/xu4/fsoverlay/etc/init.d/S02fan && chmod a+x /etc/init.d/S02fan && reboot
IntegRa last edited by
Same problem here
On my XU4 I solved the issue with a minimum fan flow running all the time to avoid any bad noise when stopped (idle mode) and try to start up again.
I will give you all figures details I had modified
It will be fixed in the next version
Megamax last edited by
@oyyodams, thanks for the help! Now I hear the normal noise and the fan works correctly! Thank you so much!!
if it can helsp, please find here below my specific XU4 setting to have XU4 fan running all the time according a smooth "curve".
May be possible to adjuted depending on your fan builtin quality.
Settingof S02fan :