Recalbox sur 1up-pix-raspberry-pi-pocket-gameboy-2018
-
@Dragu
Je viens de refaire mon install, j'ai réinstallé les paramètre pour l'écran, et j'ai simplement modifié la config GPIO Controllers comme cité plus haut :------------ D2 - GPIO Controllers ------------
GPIO Controllers
enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=1
mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args="map=5 gpio=17,16,27,22,21,20,6,26,14,19,5,4,-1"
Cela ne donne rien
-
-
@fredkadelic
"out of tree modul taints kernel"
Cela voudrait dire que tu n'as pas la bonne version de mk_arcade_joystick_rpi.ko dans ton package. D'autant plus qu'il semble ne pas connaître map=5.
Il vaudrait controler sous
/lib/modules/4.4.13-v7/extra/mk_arcade_joystick_rpi.ko
bonne version longueur14972C'était la compilation que @Substring avait mis à ma disposition dans un link qui ne marche plus.
Je pourrais toujours te la mettre sur mon serveur, si l'erreur est là. -
@fredkadelic
juste mes logs# lsmod Module Size Used by Tainted: G bnep 10340 2 bluetooth 326105 5 bnep evdev 11396 1 joydev 9024 0 mk_arcade_joystick_rpi 3420 0 usbhid 37782 0 uinput 7454 0 xt_connmark 1787 2 ipv6 347466 48 [permanent] iptable_nat 1725 0 nf_conntrack_ipv4 12912 3 nf_defrag_ipv4 1428 1 nf_conntrack_ipv4 nf_nat_ipv4 4992 1 iptable_nat nf_nat 12375 1 nf_nat_ipv4 nf_conntrack 77396 4 xt_connmark,nf_conntrack_ipv4,nf_nat_ipv4,nf_nat iptable_mangle 1454 1 8192cu 560113 0 snd_bcm2835 20511 2 cfg80211 427983 1 8192cu snd_pcm 75698 2 snd_bcm2835 rfkill 16037 5 bluetooth,cfg80211 snd_timer 19156 1 snd_pcm snd 51908 6 snd_bcm2835,snd_pcm,snd_timer bcm2835_gpiomem 3040 0 bcm2835_wdt 3225 0 uio_pdrv_genirq 3164 0 uio 8000 1 uio_pdrv_genirq # le_ns: 440795202767 ns [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000025] Switching to timer-based delay loop, resolution 52ns [ 0.000264] Console: colour dummy device 80x30 [ 0.000463] console [tty3] enabled [ 0.000488] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000507] pid_max: default: 32768 minimum: 301 [ 0.000817] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000831] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001744] Disabling cpuset control group subsystem [ 0.001774] Initializing cgroup subsys io [ 0.001803] Initializing cgroup subsys memory [ 0.001841] Initializing cgroup subsys devices [ 0.001859] Initializing cgroup subsys freezer [ 0.001878] Initializing cgroup subsys net_cls [ 0.001926] CPU: Testing write buffer coherency: ok [ 0.001984] ftrace: allocating 21199 entries in 63 pages [ 0.050349] CPU0: update cpu_capacity 1024 [ 0.050379] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.050393] [bcm2709_smp_prepare_cpus] enter [ 0.050529] Setting up static identity map for 0x8240 - 0x8274 [ 0.052194] [bcm2709_boot_secondary] cpu:1 started (0) 16 [ 0.052438] [bcm2709_secondary_init] enter cpu:1 [ 0.052480] CPU1: update cpu_capacity 1024 [ 0.052486] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.052860] [bcm2709_boot_secondary] cpu:2 started (0) 18 [ 0.053040] [bcm2709_secondary_init] enter cpu:2 [ 0.053061] CPU2: update cpu_capacity 1024 [ 0.053067] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.053427] [bcm2709_boot_secondary] cpu:3 started (0) 16 [ 0.053565] [bcm2709_secondary_init] enter cpu:3 [ 0.053585] CPU3: update cpu_capacity 1024 [ 0.053591] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.053651] Brought up 4 CPUs [ 0.053674] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.053682] CPU: All CPU(s) started in HYP mode. [ 0.053689] CPU: Virtualization extensions available. [ 0.054307] devtmpfs: initialized [ 0.064744] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.065065] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.065781] pinctrl core: initialized pinctrl subsystem [ 0.066305] NET: Registered protocol family 16 [ 0.071606] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.078444] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.078456] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.078609] Serial: AMBA PL011 UART driver [ 0.078748] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.078909] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.142486] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1 [ 0.143047] SCSI subsystem initialized [ 0.143235] usbcore: registered new interface driver usbfs [ 0.143324] usbcore: registered new interface driver hub [ 0.143421] usbcore: registered new device driver usb [ 0.149905] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-04-04 18:41 [ 0.177228] clocksource: Switched to clocksource arch_sys_counter [ 0.223348] FS-Cache: Loaded [ 0.223620] CacheFiles: Loaded [ 0.235934] NET: Registered protocol family 2 [ 0.236785] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.236851] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.236950] TCP: Hash tables configured (established 4096 bind 4096) [ 0.237014] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.237044] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.237303] NET: Registered protocol family 1 [ 0.237619] RPC: Registered named UNIX socket transport module. [ 0.237629] RPC: Registered udp transport module. [ 0.237638] RPC: Registered tcp transport module. [ 0.237646] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.238787] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.240098] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.253463] VFS: Disk quotas dquot_6.6.0 [ 0.253776] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.256069] FS-Cache: Netfs 'nfs' registered for caching [ 0.256967] NFS: Registering the id_resolver key type [ 0.257019] Key type id_resolver registered [ 0.257028] Key type id_legacy registered [ 0.259398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.259525] io scheduler noop registered [ 0.259546] io scheduler deadline registered (default) [ 0.259602] io scheduler cfq registered [ 0.262096] BCM2708FB: allocated DMA memory de800000 [ 0.262122] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 0.267797] Console: switching to colour frame buffer device 80x30 [ 0.272148] bcm2835-rng 3f104000.rng: hwrng registered [ 0.272240] vc-cma: Videocore CMA driver [ 0.272249] vc-cma: vc_cma_base = 0x00000000 [ 0.272258] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.272267] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.272466] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 0.287197] brd: module loaded [ 0.295832] loop: module loaded [ 0.296697] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0 [ 0.298074] Loading iSCSI transport class v2.0-870. [ 0.298706] usbcore: registered new interface driver smsc95xx [ 0.298757] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.499030] Core Release: 2.80a [ 0.499043] Setting default values for core params [ 0.499075] Finished setting default values for core params [ 0.699438] Using Buffer DMA mode [ 0.699449] Periodic Transfer Interrupt Enhancement - disabled [ 0.699457] Multiprocessor Interrupt Enhancement - disabled [ 0.699466] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.699480] Dedicated Tx FIFOs mode [ 0.699783] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e814000 dma = 0xde814000 len=9024 [ 0.699812] FIQ FSM acceleration enabled for : [ 0.699812] Non-periodic Split Transactions [ 0.699812] Periodic Split Transactions [ 0.699812] High-Speed Isochronous Endpoints [ 0.699812] Interrupt/Control Split Transaction hack enabled [ 0.699835] dwc_otg: Microframe scheduler enabled [ 0.699877] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80446f74 [ 0.699891] WARN::hcd_init_fiq:414: FIQ ASM at 0x804472e4 length 36 [ 0.699906] WARN::hcd_init_fiq:439: MPHI regs_base at 0x9f932000 [ 0.699964] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.700000] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.700034] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.700084] Init: Port Power? op_state=1 [ 0.700091] Init: Power Port (0) [ 0.700281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.700296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.700309] usb usb1: Product: DWC OTG Controller [ 0.700321] usb usb1: Manufacturer: Linux 4.4.13-v7 dwc_otg_hcd [ 0.700333] usb usb1: SerialNumber: 3f980000.usb [ 0.701116] hub 1-0:1.0: USB hub found [ 0.701160] hub 1-0:1.0: 1 port detected [ 0.701813] dwc_otg: FIQ enabled [ 0.701822] dwc_otg: NAK holdoff enabled [ 0.701830] dwc_otg: FIQ split-transaction FSM enabled [ 0.701862] Module dwc_common_port init [ 0.702106] usbcore: registered new interface driver usb-storage [ 0.702382] mousedev: PS/2 mouse device common for all mice [ 0.703165] bcm2835-cpufreq: min=600000 max=1200000 [ 0.705804] sdhci: Secure Digital Host Controller Interface driver [ 0.705808] sdhci: Copyright(c) Pierre Ossman [ 0.707909] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.707916] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 0.747273] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.747488] ledtrig-cpu: registered to indicate activity on CPUs [ 0.747559] hidraw: raw HID events driver (C) Jiri Kosina [ 0.747908] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.749724] Initializing XFRM netlink socket [ 0.749742] NET: Registered protocol family 17 [ 0.749814] Key type dns_resolver registered [ 0.750143] Registering SWP/SWPB emulation handler [ 0.750538] registered taskstats version 1 [ 0.750635] vc-sm: Videocore shared memory driver [ 0.750644] [vc_sm_connected_init]: start [ 0.753351] [vc_sm_connected_init]: end - returning 0 [ 0.755463] pinctrl-bcm2835 3f200000.gpio: /soc/gpio@7e200000/uart0_pins: brcm,pull must have 1 or 0 entries [ 0.755547] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.755747] of_cfs_init [ 0.755807] of_cfs_init: OK [ 0.756434] Waiting for root device /dev/mmcblk0p2... [ 0.798657] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.801644] mmc0: new high speed SDXC card at address e624 [ 0.801979] mmcblk0: mmc0:e624 SL64G 59.5 GiB [ 0.804141] mmcblk0: p1 p2 p3 [ 0.861027] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 0.861395] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 0.866691] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 0.866715] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.870036] devtmpfs: mounted [ 0.870414] Freeing unused kernel memory: 476K (807e5000 - 8085c000) [ 0.897316] Indeed it is in host mode hprt0 = 00021501 [ 1.077301] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.077499] Indeed it is in host mode hprt0 = 00001101 [ 1.120258] random: nonblocking pool is initialized [ 1.277805] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 1.277826] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.277841] usb 1-1: Product: USB 2.0 Hub [ 1.278316] hub 1-1:1.0: USB hub found [ 1.278406] hub 1-1:1.0: 4 ports detected [ 1.427734] udevd[162]: starting version 3.2 [ 1.557268] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.596418] udevd[164]: starting eudev-3.2 [ 1.658700] usb 1-1.1: New USB device found, idVendor=7392, idProduct=7811 [ 1.658717] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.658724] usb 1-1.1: Product: 802.11n WLAN Adapter [ 1.658730] usb 1-1.1: Manufacturer: Realtek [ 1.658736] usb 1-1.1: SerialNumber: 00e04c000001 [ 1.735269] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 1.832910] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.244931] usbcore: registered new interface driver rtl8192cu [ 3.491615] nf_conntrack version 0.5.0 (7709 buckets, 30836 max) [ 3.659307] NET: Registered protocol family 10 [ 4.319548] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.126881] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.394693] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 13.395164] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 13.411093] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 14.448836] usbcore: registered new interface driver usbhid [ 14.448848] usbhid: USB HID core driver [ 15.584230] mk_arcade_joystick_rpi: pad type : 5 [ 15.584247] mk_arcade_joystick_rpi: pad type : 5 [ 15.584259] GPIO = 4 [ 15.584265] GPIO = 17 [ 15.584269] GPIO = 6 [ 15.584272] GPIO = 5 [ 15.584276] GPIO = 19 [ 15.584280] GPIO = 26 [ 15.584284] GPIO = 16 [ 15.584288] GPIO = 24 [ 15.584292] GPIO = 23 [ 15.584296] GPIO = 18 [ 15.584300] GPIO = 15 [ 15.584304] GPIO = 14 [ 15.584308] GPIO = 23 [ 15.584333] GPIO configured for pad0 [ 15.584811] input: GPIO Controller 1 as /devices/virtual/input/input0 [ 24.591472] Bluetooth: Core ver 2.21 [ 24.591525] NET: Registered protocol family 31 [ 24.591531] Bluetooth: HCI device and connection manager initialized [ 24.591546] Bluetooth: HCI socket layer initialized [ 24.591556] Bluetooth: L2CAP socket layer initialized [ 24.591580] Bluetooth: SCO socket layer initialized [ 24.688643] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.688660] Bluetooth: BNEP filters: protocol multicast [ 24.688679] Bluetooth: BNEP socket layer initialized -
@Dragu
Merci pour toutes tes infos Dragu
et merci aussi @ Substring je vais finalement le vendre, pas le temps de m'en occuper mais merci à vous tous j'ai appris beaucoup de choses
